pdo_oci 和oci8

2、oracle11.2(远程)
3、设置oracle11.2允许远程访问(属于oracle设置的范畴)
4、设置防火墙允许访问
5、以下步骤以root身份执行

二、安装oci8扩展

1、到oracle官网下载:
oracle-instantclient11.2-basic-11.2.0.4.0-1.x86_64.rpm和oracle-instantclient11.2-devel-11.2.0.4.0-1.x86_64.rpm(注:根据操作系统和数据库版本选择不同的版本)

2、安装以上两个rpm包
rpm -ivh oracle-instantclient11.2-basic-11.2.0.4.0-1.x86_64.rpm
rpm -ivh oracle-instantclient11.2-devel-11.2.0.4.0-1.x86_64.rpm

以上的安装路径为:
/usr/lib/oracle/11.2/client64/lib 和/usr/include/oracle/11.2/client64.

pecl install oci8
dnf install libnsl

Warning: PHP Startup: Unable to load dynamic library 'oci8' (tried: /usr/local/php8/lib/php/extensions/no-debug-zts-20230831/oci8 (/usr/local/php8/lib/php/extensions/no-debug-zts-20230831/oci8: cannot open shared object file: No such file or directory), /usr/local/php8/lib/php/extensions/no-debug-zts-20230831/oci8.so (libnsl.so.1: cannot open shared object file: No such file or directory)) in Unknown on line 0

还可能用到以下几条命令:
rpm -qpl 可以查看rpm包会在哪些路径安装文件
rpm -qa | grep oracle //查看oracle是否安装
rpm -qa //查看所有已安装的人rpm包
rpm -e oracle-instantclient11.2-devel-11.2.0.4.0-1.x86_64.rpm //卸载已安装的rpm包
rpm -ivh --force oracle-instantclient11.2-devel-11.2.0.4.0-1.x86_64.rpm //强制安装rpm包

3、到php官网下载oci8-2.0.8.tgz(不能使用高版本,否则以下可能会报错)并解压为oci8-2.0.8文件夹
http://pecl.php.net/get/oci8-3.2.1.tgz
4、在oci8-2.0.8文件夹中执行

# phpize(此处为phpize命令的全路径)
# ./configure --with-oci8=instantclient,/usr/lib/oracle/11.2/client64/lib --with-php-config=/usr/local/php8/bin/php-config

(此处为php-config命令的完整路径)

# make && make install
执行成功后,界面会输出oci8.so的完整路径

5、在php.ini文件中添加
extension=oci8.so(此处应填写oci8.so的完整路径,此路径在上条命令中输出)

6、重启apache
httpd -k restart(此处为httpd的全路径)

三、安装pdo_oci扩展

先执行上述1、2步骤;

3、执行#vi /etc/ld.so.conf
/usr/lib/oracle/11.2/client64/lib/ //加入此行,保存退出

4、执行

ln -s /usr/lib/oracle/11.2/client64 /usr/lib/oracle/11.2/client
ln -s /usr/include/oracle/11.2/client64 /usr/include/oracle/11.2/client
64位系统需要创建32位的软链接(这里可能是一个遗留bug)

5、执行vi etc/profile
加入以下几行

export ORACLE_HOME=/usr/lib/oracle/11.2/client64/
export LD_LIBRARY_PATH=/usr/lib/oracle/11.2/client64:$LD_LIBRARY_PATH
export NLS_LANG="AMERICAN_AMERICA.AL32UTF8"

6、执行

source /etc/profile

7、执行
ln -s /usr/include/oracle/11.2 /usr/include/oracle/10.2.0.1
ln -s /usr/lib/oracle/11.2 /usr/lib/oracle/10.2.0.1
注:防止pdo_oci对oracle11支持不足

pecl install pdo_oci

8、官网下载php-5.3.27.tar.gz,解压后将其中的pdo_oci文件夹复制到php的扩展目录中(如主目录/ext/pdo中)

注意pdo_oci太老,要搞configure和config.m4 把这个错误调过去Oracle libclntsh.so client library not found or its version is lower than 9

elif test -f $PDO_OCI_DIR/lib/libclntsh.$SHLIB_SUFFIX_NAME.11.2; then

PDO_OCI_VERSION=11.2
else
PDO_OCI_VERSION=11.2

rockylinux9

 cd php-8.3.3/ext/pdo_oci

/usr/local/php8/bin/phpize(此处为phpize命令的全路径)
./configure --with-pdo-oci=instantclient,/usr/lib/oracle/11.2/client64/lib,11.2 --with-php-config=/usr/local/php8/bin/php-config

(此处为php-config命令的完整路径)

make && make install

执行成功后,界面会输出pdo_oci.so的完整路径

10、在php.ini文件中添加
extension=pdo_oci.so(此处应填写pdo_oci.so的完整路径,此路径在上条命令中输出)

11、重启apache
httpd -k restart(此处为httpd的全路径)
https://packagist.org/packages/yajra/laravel-oci8#dev-master
支持DB::CONNECTION

四、测试是否安装成功

1、执行./php -i |grep oci(此处为php命令的全路径),输出如下证明成功:
oci8
......
PDO drivers => mysql, sqlite, sqlite2, oci

2、也可以使用php脚本测试
测试pdo_oci:$pdo= new PDO('oci:dbname=//oracle的ip地址:1521/数据库名;charset=utf8',用户名,密码);
测试oci8:$conn = oci_connect(用户名,密码, oracle的ip地址:1521/数据库名);

configure

#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
# Generated by GNU Autoconf 2.69.
#
#
# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
#
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
## -------------------- ##
## M4sh Initialization. ##
## -------------------- ##

# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
  emulate sh
  NULLCMD=:
  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
  # is contrary to our usage.  Disable this feature.
  alias -g '${1+"$@"}'='"$@"'
  setopt NO_GLOB_SUBST
else
  case `(set -o) 2>/dev/null` in #(
  *posix*) :
    set -o posix ;; #(
  *) :
     ;;
esac
fi

as_nl='
'
export as_nl
# Printing a long string crashes Solaris 7 /usr/bin/printf.
as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
# Prefer a ksh shell builtin over an external printf program on Solaris,
# but without wasting forks for bash or zsh.
if test -z "$BASH_VERSION$ZSH_VERSION" \
    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
  as_echo='print -r --'
  as_echo_n='print -rn --'
elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
  as_echo='printf %s\n'
  as_echo_n='printf %s'
else
  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
    as_echo_n='/usr/ucb/echo -n'
  else
    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
    as_echo_n_body='eval
      arg=$1;
      case $arg in #(
      *"$as_nl"*)
    expr "X$arg" : "X\\(.*\\)$as_nl";
    arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
      esac;
      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
    '
    export as_echo_n_body
    as_echo_n='sh -c $as_echo_n_body as_echo'
  fi
  export as_echo_body
  as_echo='sh -c $as_echo_body as_echo'
fi

# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
  PATH_SEPARATOR=:
  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
      PATH_SEPARATOR=';'
  }
fi

# IFS
# We need space, tab and new line, in precisely that order.  Quoting is
# there to prevent editors from complaining about space-tab.
# (If _AS_PATH_WALK were called with IFS unset, it would disable word
# splitting by setting IFS to empty value.)
IFS=" "" $as_nl"

# Find who we are.  Look in the path if we contain no directory separator.
as_myself=
case $0 in #((
  *[\\/]* ) as_myself=$0 ;;
  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
  done
IFS=$as_save_IFS

     ;;
esac
# We did not find ourselves, most probably we were run as `sh COMMAND'
# in which case we are not to be found in the path.
if test "x$as_myself" = x; then
  as_myself=$0
fi
if test ! -f "$as_myself"; then
  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
  exit 1
fi

# Unset variables that we do not need and which cause bugs (e.g. in
# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
# suppresses any "Segmentation fault" message there.  '((' could
# trigger a bug in pdksh 5.2.14.
for as_var in BASH_ENV ENV MAIL MAILPATH
do eval test x\${$as_var+set} = xset \
  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
done
PS1='$ '
PS2='> '
PS4='+ '

# NLS nuisances.
LC_ALL=C
export LC_ALL
LANGUAGE=C
export LANGUAGE

# CDPATH.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH

# Use a proper internal environment variable to ensure we don't fall
  # into an infinite loop, continuously re-executing ourselves.
  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
    _as_can_reexec=no; export _as_can_reexec;
    # We cannot yet assume a decent shell, so we have to provide a
# neutralization value for shells without unset; and this also
# works around shells that cannot unset nonexistent variables.
# Preserve -v and -x to the replacement shell.
BASH_ENV=/dev/null
ENV=/dev/null
(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
case $- in # ((((
  *v*x* | *x*v* ) as_opts=-vx ;;
  *v* ) as_opts=-v ;;
  *x* ) as_opts=-x ;;
  * ) as_opts= ;;
esac
exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
# Admittedly, this is quite paranoid, since all the known shells bail
# out after a failed `exec'.
$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
as_fn_exit 255
  fi
  # We don't want this to propagate to other subprocesses.
          { _as_can_reexec=; unset _as_can_reexec;}
if test "x$CONFIG_SHELL" = x; then
  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
  emulate sh
  NULLCMD=:
  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
  # is contrary to our usage.  Disable this feature.
  alias -g '\${1+\"\$@\"}'='\"\$@\"'
  setopt NO_GLOB_SUBST
else
  case \`(set -o) 2>/dev/null\` in #(
  *posix*) :
    set -o posix ;; #(
  *) :
     ;;
esac
fi
"
  as_required="as_fn_return () { (exit \$1); }
as_fn_success () { as_fn_return 0; }
as_fn_failure () { as_fn_return 1; }
as_fn_ret_success () { return 0; }
as_fn_ret_failure () { return 1; }

exitcode=0
as_fn_success || { exitcode=1; echo as_fn_success failed.; }
as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :

else
  exitcode=1; echo positional parameters were not saved.
fi
test x\$exitcode = x0 || exit 1
test -x / || exit 1"
  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
test \$(( 1 + 1 )) = 2 || exit 1"
  if (eval "$as_required") 2>/dev/null; then :
  as_have_required=yes
else
  as_have_required=no
fi
  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :

else
  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
as_found=false
for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  as_found=:
  case $as_dir in #(
     /*)
       for as_base in sh bash ksh sh5; do
         # Try only shells that exist, to save several forks.
         as_shell=$as_dir/$as_base
         if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
            { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
  CONFIG_SHELL=$as_shell as_have_required=yes
           if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
  break 2
fi
fi
       done;;
       esac
  as_found=false
done
$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
          { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
  CONFIG_SHELL=$SHELL as_have_required=yes
fi; }
IFS=$as_save_IFS

      if test "x$CONFIG_SHELL" != x; then :
  export CONFIG_SHELL
             # We cannot yet assume a decent shell, so we have to provide a
# neutralization value for shells without unset; and this also
# works around shells that cannot unset nonexistent variables.
# Preserve -v and -x to the replacement shell.
BASH_ENV=/dev/null
ENV=/dev/null
(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
case $- in # ((((
  *v*x* | *x*v* ) as_opts=-vx ;;
  *v* ) as_opts=-v ;;
  *x* ) as_opts=-x ;;
  * ) as_opts= ;;
esac
exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
# Admittedly, this is quite paranoid, since all the known shells bail
# out after a failed `exec'.
$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
exit 255
fi

    if test x$as_have_required = xno; then :
  $as_echo "$0: This script requires a shell more modern than all"
  $as_echo "$0: the shells that I found on your system."
  if test x${ZSH_VERSION+set} = xset ; then
    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
  else
    $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
$0: including any error possibly output before this
$0: message. Then install a modern shell, or manually run
$0: the script under such a shell if you do have one."
  fi
  exit 1
fi
fi
fi
SHELL=${CONFIG_SHELL-/bin/sh}
export SHELL
# Unset more variables known to interfere with behavior of common tools.
CLICOLOR_FORCE= GREP_OPTIONS=
unset CLICOLOR_FORCE GREP_OPTIONS

## --------------------- ##
## M4sh Shell Functions. ##
## --------------------- ##
# as_fn_unset VAR
# ---------------
# Portably unset VAR.
as_fn_unset ()
{
  { eval $1=; unset $1;}
}
as_unset=as_fn_unset

# as_fn_set_status STATUS
# -----------------------
# Set $? to STATUS, without forking.
as_fn_set_status ()
{
  return $1
} # as_fn_set_status

# as_fn_exit STATUS
# -----------------
# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
as_fn_exit ()
{
  set +e
  as_fn_set_status $1
  exit $1
} # as_fn_exit

# as_fn_mkdir_p
# -------------
# Create "$as_dir" as a directory, including parents if necessary.
as_fn_mkdir_p ()
{

  case $as_dir in #(
  -*) as_dir=./$as_dir;;
  esac
  test -d "$as_dir" || eval $as_mkdir_p || {
    as_dirs=
    while :; do
      case $as_dir in #(
      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
      *) as_qdir=$as_dir;;
      esac
      as_dirs="'$as_qdir' $as_dirs"
      as_dir=`$as_dirname -- "$as_dir" ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
     X"$as_dir" : 'X\(//\)[^/]' \| \
     X"$as_dir" : 'X\(//\)$' \| \
     X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$as_dir" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
        s//\1/
        q
      }
      /^X\(\/\/\)[^/].*/{
        s//\1/
        q
      }
      /^X\(\/\/\)$/{
        s//\1/
        q
      }
      /^X\(\/\).*/{
        s//\1/
        q
      }
      s/.*/./; q'`
      test -d "$as_dir" && break
    done
    test -z "$as_dirs" || eval "mkdir $as_dirs"
  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"

} # as_fn_mkdir_p

# as_fn_executable_p FILE
# -----------------------
# Test if FILE is an executable regular file.
as_fn_executable_p ()
{
  test -f "$1" && test -x "$1"
} # as_fn_executable_p
# as_fn_append VAR VALUE
# ----------------------
# Append the text in VALUE to the end of the definition contained in VAR. Take
# advantage of any shell optimizations that allow amortized linear growth over
# repeated appends, instead of the typical quadratic growth present in naive
# implementations.
if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
  eval 'as_fn_append ()
  {
    eval $1+=\$2
  }'
else
  as_fn_append ()
  {
    eval $1=\$$1\$2
  }
fi # as_fn_append

# as_fn_arith ARG...
# ------------------
# Perform arithmetic evaluation on the ARGs, and store the result in the
# global $as_val. Take advantage of shells that can avoid forks. The arguments
# must be portable across $(()) and expr.
if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
  eval 'as_fn_arith ()
  {
    as_val=$(( $* ))
  }'
else
  as_fn_arith ()
  {
    as_val=`expr "$@" || test $? -eq 1`
  }
fi # as_fn_arith

# as_fn_error STATUS ERROR [LINENO LOG_FD]
# ----------------------------------------
# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
# script with STATUS, using 1 if that was 0.
as_fn_error ()
{
  as_status=$1; test $as_status -eq 0 && as_status=1
  if test "$4"; then
    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
  fi
  $as_echo "$as_me: error: $2" >&2
  as_fn_exit $as_status
} # as_fn_error

if expr a : '\(a\)' >/dev/null 2>&1 &&
   test "X`expr 00001 : '.*\(...\)'`" = X001; then
  as_expr=expr
else
  as_expr=false
fi

if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
  as_basename=basename
else
  as_basename=false
fi

if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
  as_dirname=dirname
else
  as_dirname=false
fi

as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
     X"$0" : 'X\(//\)$' \| \
     X"$0" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X/"$0" |
    sed '/^.*\/\([^/][^/]*\)\/*$/{
        s//\1/
        q
      }
      /^X\/\(\/\/\)$/{
        s//\1/
        q
      }
      /^X\/\(\/\).*/{
        s//\1/
        q
      }
      s/.*/./; q'`

# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits

  as_lineno_1=$LINENO as_lineno_1a=$LINENO
  as_lineno_2=$LINENO as_lineno_2a=$LINENO
  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
  sed -n '
    p
    /[$]LINENO/=
  ' <$as_myself |
    sed '
      s/[$]LINENO.*/&-/
      t lineno
      b
      :lineno
      N
      :loop
      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
      t loop
      s/-\n.*//
    ' >$as_me.lineno &&
  chmod +x "$as_me.lineno" ||
    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }

  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
  # already done that, so ensure we don't try to do so again and fall
  # in an infinite loop.  This has already happened in practice.
  _as_can_reexec=no; export _as_can_reexec
  # Don't try to exec as it changes $[0], causing all sort of problems
  # (the dirname of $[0] is not the place where we might find the
  # original and so on.  Autoconf is especially sensitive to this).
  . "./$as_me.lineno"
  # Exit status is that of the last command.
  exit
}

ECHO_C= ECHO_N= ECHO_T=
case `echo -n x` in #(((((
-n*)
  case `echo 'xy\c'` in
  *c*) ECHO_T='    ';;    # ECHO_T is single tab character.
  xy)  ECHO_C='\c';;
  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
       ECHO_T='    ';;
  esac;;
*)
  ECHO_N='-n';;
esac

rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
  rm -f conf$$.dir/conf$$.file
else
  rm -f conf$$.dir
  mkdir conf$$.dir 2>/dev/null
fi
if (echo >conf$$.file) 2>/dev/null; then
  if ln -s conf$$.file conf$$ 2>/dev/null; then
    as_ln_s='ln -s'
    # ... but there are two gotchas:
    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
    # In both cases, we have to default to `cp -pR'.
    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
      as_ln_s='cp -pR'
  elif ln conf$$.file conf$$ 2>/dev/null; then
    as_ln_s=ln
  else
    as_ln_s='cp -pR'
  fi
else
  as_ln_s='cp -pR'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null

if mkdir -p . 2>/dev/null; then
  as_mkdir_p='mkdir -p "$as_dir"'
else
  test -d ./-p && rmdir ./-p
  as_mkdir_p=false
fi

as_test_x='test -x'
as_executable_p=as_fn_executable_p

# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"

# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"

# Check that we are running under the correct shell.
SHELL=${CONFIG_SHELL-/bin/sh}

case X$ECHO in
X*--fallback-echo)
  # Remove one level of quotation (which was required for Make).
  ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
  ;;
esac

echo=${ECHO-echo}
if test "X$1" = X--no-reexec; then
  # Discard the --no-reexec flag, and continue.
  shift
elif test "X$1" = X--fallback-echo; then
  # Avoid inline document here, it may be left over
  :
elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
  # Yippee, $echo works!
  :
else
  # Restart under the correct shell.
  exec $SHELL "$0" --no-reexec ${1+"$@"}
fi

if test "X$1" = X--fallback-echo; then
  # used as fallback echo
  shift
  cat <<EOF
$*
EOF
  exit 0
fi

# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH

if test -z "$ECHO"; then
if test "X${echo_test_string+set}" != Xset; then
# find a string as large as possible, as long as the shell can cope with it
  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
       echo_test_string=`eval $cmd` &&
       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
    then
      break
    fi
  done
fi

if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
   test "X$echo_testing_string" = "X$echo_test_string"; then
  :
else
  # The Solaris, AIX, and Digital Unix default echo programs unquote
  # backslashes.  This makes it impossible to quote backslashes using
  #   echo "$something" | sed 's/\\/\\\\/g'
  #
  # So, first we look for a working echo in the user's PATH.

  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
  for dir in $PATH /usr/ucb; do
    IFS="$lt_save_ifs"
    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
       test "X$echo_testing_string" = "X$echo_test_string"; then
      echo="$dir/echo"
      break
    fi
  done
  IFS="$lt_save_ifs"

  if test "X$echo" = Xecho; then
    # We didn't find a better echo, so look for alternatives.
    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
       test "X$echo_testing_string" = "X$echo_test_string"; then
      # This shell has a builtin print -r that does the trick.
      echo='print -r'
    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
     test "X$CONFIG_SHELL" != X/bin/ksh; then
      # If we have ksh, try running configure again with it.
      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
      export ORIGINAL_CONFIG_SHELL
      CONFIG_SHELL=/bin/ksh
      export CONFIG_SHELL
      exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
    else
      # Try using printf.
      echo='printf %s\n'
      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
     echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
     test "X$echo_testing_string" = "X$echo_test_string"; then
    # Cool, printf works
    :
      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
       test "X$echo_testing_string" = 'X\t' &&
       echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
       test "X$echo_testing_string" = "X$echo_test_string"; then
    CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
    export CONFIG_SHELL
    SHELL="$CONFIG_SHELL"
    export SHELL
    echo="$CONFIG_SHELL $0 --fallback-echo"
      elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
       test "X$echo_testing_string" = 'X\t' &&
       echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
       test "X$echo_testing_string" = "X$echo_test_string"; then
    echo="$CONFIG_SHELL $0 --fallback-echo"
      else
    # maybe with a smaller string...
    prev=:

    for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
      if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
      then
        break
      fi
      prev="$cmd"
    done

    if test "$prev" != 'sed 50q "$0"'; then
      echo_test_string=`eval $prev`
      export echo_test_string
      exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
    else
      # Oops.  We lost completely, so just stick with echo.
      echo=echo
    fi
      fi
    fi
  fi
fi
fi

# Copy echo and quote the copy suitably for passing to libtool from
# the Makefile, instead of quoting the original, which is used later.
ECHO=$echo
if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
   ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
fi

tagnames=${tagnames+${tagnames},}CXX

test -n "$DJDIR" || exec 7<&0 </dev/null
exec 6>&1

# Name of the host.
# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
# so uname gets run too.
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`

#
# Initializations.
#
ac_default_prefix=/usr/local
ac_clean_files=
ac_config_libobj_dir=.
LIBOBJS=
cross_compiling=no
subdirs=
MFLAGS=
MAKEFLAGS=

# Identity of this package.
PACKAGE_NAME=
PACKAGE_TARNAME=
PACKAGE_VERSION=
PACKAGE_STRING=
PACKAGE_BUGREPORT=
PACKAGE_URL=

ac_unique_file="config.m4"
# Factoring default headers for most tests.
ac_includes_default="\
#include <stdio.h>
#ifdef HAVE_SYS_TYPES_H
# include <sys/types.h>
#endif
#ifdef HAVE_SYS_STAT_H
# include <sys/stat.h>
#endif
#ifdef STDC_HEADERS
# include <stdlib.h>
# include <stddef.h>
#else
# ifdef HAVE_STDLIB_H
#  include <stdlib.h>
# endif
#endif
#ifdef HAVE_STRING_H
# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
#  include <memory.h>
# endif
# include <string.h>
#endif
#ifdef HAVE_STRINGS_H
# include <strings.h>
#endif
#ifdef HAVE_INTTYPES_H
# include <inttypes.h>
#endif
#ifdef HAVE_STDINT_H
# include <stdint.h>
#endif
#ifdef HAVE_UNISTD_H
# include <unistd.h>
#endif"

ac_subst_vars='LTLIBOBJS
LIBOBJS
BUILD_CC
LIBTOOL
NMEDIT
DSYMUTIL
STRIP
RANLIB
AR
ECHO
LN_S
PDO_OCI_VERSION
PDO_OCI_DIR
PDO_OCI_SHARED_LIBADD
AWK
SHLIB_DL_SUFFIX_NAME
SHLIB_SUFFIX_NAME
target_os
target_vendor
target_cpu
target
host_os
host_vendor
host_cpu
host
build_os
build_vendor
build_cpu
build
CPP
OBJEXT
EXEEXT
ac_ct_CC
CPPFLAGS
LDFLAGS
CFLAGS
CC
PKG_CONFIG_LIBDIR
PKG_CONFIG_PATH
PKG_CONFIG
CONFIGURE_OPTIONS
CONFIGURE_COMMAND
SED
EGREP
GREP
target_alias
host_alias
build_alias
LIBS
ECHO_T
ECHO_N
ECHO_C
DEFS
mandir
localedir
libdir
psdir
pdfdir
dvidir
htmldir
infodir
docdir
oldincludedir
includedir
runstatedir
localstatedir
sharedstatedir
sysconfdir
datadir
datarootdir
libexecdir
sbindir
bindir
program_transform_name
prefix
exec_prefix
PACKAGE_URL
PACKAGE_BUGREPORT
PACKAGE_STRING
PACKAGE_VERSION
PACKAGE_TARNAME
PACKAGE_NAME
PATH_SEPARATOR
SHELL'
ac_subst_files=''
ac_user_opts='
enable_option_checking
with_libdir
with_php_config
with_pdo_oci
enable_shared
enable_static
enable_fast_install
with_gnu_ld
enable_libtool_lock
with_pic
with_tags
'
      ac_precious_vars='build_alias
host_alias
target_alias
PKG_CONFIG
PKG_CONFIG_PATH
PKG_CONFIG_LIBDIR
CC
CFLAGS
LDFLAGS
LIBS
CPPFLAGS
CPP'

# Initialize some variables set by options.
ac_init_help=
ac_init_version=false
ac_unrecognized_opts=
ac_unrecognized_sep=
# The variables have the same names as the options, with
# dashes changed to underlines.
cache_file=/dev/null
exec_prefix=NONE
no_create=
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
verbose=
x_includes=NONE
x_libraries=NONE

# Installation directory options.
# These are left unexpanded so users can "make install exec_prefix=/foo"
# and all the variables that are supposed to be based on exec_prefix
# by default will actually change.
# Use braces instead of parens because sh, perl, etc. also accept them.
# (The list follows the same order as the GNU Coding Standards.)
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datarootdir='${prefix}/share'
datadir='${datarootdir}'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
runstatedir='${localstatedir}/run'
includedir='${prefix}/include'
oldincludedir='/usr/include'
docdir='${datarootdir}/doc/${PACKAGE}'
infodir='${datarootdir}/info'
htmldir='${docdir}'
dvidir='${docdir}'
pdfdir='${docdir}'
psdir='${docdir}'
libdir='${exec_prefix}/lib'
localedir='${datarootdir}/locale'
mandir='${datarootdir}/man'

ac_prev=
ac_dashdash=
for ac_option
do
  # If the previous option needs an argument, assign it.
  if test -n "$ac_prev"; then
    eval $ac_prev=\$ac_option
    ac_prev=
    continue
  fi

  case $ac_option in
  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
  *=)   ac_optarg= ;;
  *)    ac_optarg=yes ;;
  esac

  # Accept the important Cygnus configure options, so we can diagnose typos.

  case $ac_dashdash$ac_option in
  --)
    ac_dashdash=yes ;;

  -bindir | --bindir | --bindi | --bind | --bin | --bi)
    ac_prev=bindir ;;
  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
    bindir=$ac_optarg ;;

  -build | --build | --buil | --bui | --bu)
    ac_prev=build_alias ;;
  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
    build_alias=$ac_optarg ;;

  -cache-file | --cache-file | --cache-fil | --cache-fi \
  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
    ac_prev=cache_file ;;
  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
    cache_file=$ac_optarg ;;

  --config-cache | -C)
    cache_file=config.cache ;;

  -datadir | --datadir | --datadi | --datad)
    ac_prev=datadir ;;
  -datadir=* | --datadir=* | --datadi=* | --datad=*)
    datadir=$ac_optarg ;;

  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
  | --dataroo | --dataro | --datar)
    ac_prev=datarootdir ;;
  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
    datarootdir=$ac_optarg ;;

  -disable-* | --disable-*)
    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
    # Reject names that are not valid shell variable names.
    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
      as_fn_error $? "invalid feature name: $ac_useropt"
    ac_useropt_orig=$ac_useropt
    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
    case $ac_user_opts in
      *"
"enable_$ac_useropt"
"*) ;;
      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
     ac_unrecognized_sep=', ';;
    esac
    eval enable_$ac_useropt=no ;;

  -docdir | --docdir | --docdi | --doc | --do)
    ac_prev=docdir ;;
  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
    docdir=$ac_optarg ;;

  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
    ac_prev=dvidir ;;
  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
    dvidir=$ac_optarg ;;

  -enable-* | --enable-*)
    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
    # Reject names that are not valid shell variable names.
    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
      as_fn_error $? "invalid feature name: $ac_useropt"
    ac_useropt_orig=$ac_useropt
    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
    case $ac_user_opts in
      *"
"enable_$ac_useropt"
"*) ;;
      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
     ac_unrecognized_sep=', ';;
    esac
    eval enable_$ac_useropt=\$ac_optarg ;;

  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
  | --exec | --exe | --ex)
    ac_prev=exec_prefix ;;
  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
  | --exec=* | --exe=* | --ex=*)
    exec_prefix=$ac_optarg ;;

  -gas | --gas | --ga | --g)
    # Obsolete; use --with-gas.
    with_gas=yes ;;

  -help | --help | --hel | --he | -h)
    ac_init_help=long ;;
  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
    ac_init_help=recursive ;;
  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
    ac_init_help=short ;;

  -host | --host | --hos | --ho)
    ac_prev=host_alias ;;
  -host=* | --host=* | --hos=* | --ho=*)
    host_alias=$ac_optarg ;;

  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
    ac_prev=htmldir ;;
  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
  | --ht=*)
    htmldir=$ac_optarg ;;

  -includedir | --includedir | --includedi | --included | --include \
  | --includ | --inclu | --incl | --inc)
    ac_prev=includedir ;;
  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
  | --includ=* | --inclu=* | --incl=* | --inc=*)
    includedir=$ac_optarg ;;

  -infodir | --infodir | --infodi | --infod | --info | --inf)
    ac_prev=infodir ;;
  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
    infodir=$ac_optarg ;;

  -libdir | --libdir | --libdi | --libd)
    ac_prev=libdir ;;
  -libdir=* | --libdir=* | --libdi=* | --libd=*)
    libdir=$ac_optarg ;;

  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
  | --libexe | --libex | --libe)
    ac_prev=libexecdir ;;
  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
  | --libexe=* | --libex=* | --libe=*)
    libexecdir=$ac_optarg ;;

  -localedir | --localedir | --localedi | --localed | --locale)
    ac_prev=localedir ;;
  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
    localedir=$ac_optarg ;;

  -localstatedir | --localstatedir | --localstatedi | --localstated \
  | --localstate | --localstat | --localsta | --localst | --locals)
    ac_prev=localstatedir ;;
  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
    localstatedir=$ac_optarg ;;

  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
    ac_prev=mandir ;;
  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
    mandir=$ac_optarg ;;

  -nfp | --nfp | --nf)
    # Obsolete; use --without-fp.
    with_fp=no ;;

  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c | -n)
    no_create=yes ;;

  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
    no_recursion=yes ;;

  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
  | --oldin | --oldi | --old | --ol | --o)
    ac_prev=oldincludedir ;;
  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
    oldincludedir=$ac_optarg ;;

  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
    ac_prev=prefix ;;
  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
    prefix=$ac_optarg ;;

  -program-prefix | --program-prefix | --program-prefi | --program-pref \
  | --program-pre | --program-pr | --program-p)
    ac_prev=program_prefix ;;
  -program-prefix=* | --program-prefix=* | --program-prefi=* \
  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
    program_prefix=$ac_optarg ;;

  -program-suffix | --program-suffix | --program-suffi | --program-suff \
  | --program-suf | --program-su | --program-s)
    ac_prev=program_suffix ;;
  -program-suffix=* | --program-suffix=* | --program-suffi=* \
  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
    program_suffix=$ac_optarg ;;

  -program-transform-name | --program-transform-name \
  | --program-transform-nam | --program-transform-na \
  | --program-transform-n | --program-transform- \
  | --program-transform | --program-transfor \
  | --program-transfo | --program-transf \
  | --program-trans | --program-tran \
  | --progr-tra | --program-tr | --program-t)
    ac_prev=program_transform_name ;;
  -program-transform-name=* | --program-transform-name=* \
  | --program-transform-nam=* | --program-transform-na=* \
  | --program-transform-n=* | --program-transform-=* \
  | --program-transform=* | --program-transfor=* \
  | --program-transfo=* | --program-transf=* \
  | --program-trans=* | --program-tran=* \
  | --progr-tra=* | --program-tr=* | --program-t=*)
    program_transform_name=$ac_optarg ;;

  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
    ac_prev=pdfdir ;;
  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
    pdfdir=$ac_optarg ;;

  -psdir | --psdir | --psdi | --psd | --ps)
    ac_prev=psdir ;;
  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
    psdir=$ac_optarg ;;

  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
  | -silent | --silent | --silen | --sile | --sil)
    silent=yes ;;

  -runstatedir | --runstatedir | --runstatedi | --runstated \
  | --runstate | --runstat | --runsta | --runst | --runs \
  | --run | --ru | --r)
    ac_prev=runstatedir ;;
  -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \
  | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \
  | --run=* | --ru=* | --r=*)
    runstatedir=$ac_optarg ;;

  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
    ac_prev=sbindir ;;
  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
  | --sbi=* | --sb=*)
    sbindir=$ac_optarg ;;

  -sharedstatedir | --sharedstatedir | --sharedstatedi \
  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
  | --sharedst | --shareds | --shared | --share | --shar \
  | --sha | --sh)
    ac_prev=sharedstatedir ;;
  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
  | --sha=* | --sh=*)
    sharedstatedir=$ac_optarg ;;

  -site | --site | --sit)
    ac_prev=site ;;
  -site=* | --site=* | --sit=*)
    site=$ac_optarg ;;

  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
    ac_prev=srcdir ;;
  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
    srcdir=$ac_optarg ;;

  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
  | --syscon | --sysco | --sysc | --sys | --sy)
    ac_prev=sysconfdir ;;
  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
    sysconfdir=$ac_optarg ;;

  -target | --target | --targe | --targ | --tar | --ta | --t)
    ac_prev=target_alias ;;
  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
    target_alias=$ac_optarg ;;

  -v | -verbose | --verbose | --verbos | --verbo | --verb)
    verbose=yes ;;

  -version | --version | --versio | --versi | --vers | -V)
    ac_init_version=: ;;

  -with-* | --with-*)
    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
    # Reject names that are not valid shell variable names.
    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
      as_fn_error $? "invalid package name: $ac_useropt"
    ac_useropt_orig=$ac_useropt
    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
    case $ac_user_opts in
      *"
"with_$ac_useropt"
"*) ;;
      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
     ac_unrecognized_sep=', ';;
    esac
    eval with_$ac_useropt=\$ac_optarg ;;

  -without-* | --without-*)
    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
    # Reject names that are not valid shell variable names.
    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
      as_fn_error $? "invalid package name: $ac_useropt"
    ac_useropt_orig=$ac_useropt
    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
    case $ac_user_opts in
      *"
"with_$ac_useropt"
"*) ;;
      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
     ac_unrecognized_sep=', ';;
    esac
    eval with_$ac_useropt=no ;;

  --x)
    # Obsolete; use --with-x.
    with_x=yes ;;

  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
  | --x-incl | --x-inc | --x-in | --x-i)
    ac_prev=x_includes ;;
  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
    x_includes=$ac_optarg ;;

  -x-libraries | --x-libraries | --x-librarie | --x-librari \
  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
    ac_prev=x_libraries ;;
  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
    x_libraries=$ac_optarg ;;

  -*) as_fn_error $? "unrecognized option: \`$ac_option'
Try \`$0 --help' for more information"
    ;;

  *=*)
    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
    # Reject names that are not valid shell variable names.
    case $ac_envvar in #(
      '' | [0-9]* | *[!_$as_cr_alnum]* )
      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
    esac
    eval $ac_envvar=\$ac_optarg
    export $ac_envvar ;;

  *)
    # FIXME: should be removed in autoconf 3.0.
    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
    ;;

  esac
done

if test -n "$ac_prev"; then
  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
  as_fn_error $? "missing argument to $ac_option"
fi

if test -n "$ac_unrecognized_opts"; then
  case $enable_option_checking in
    no) ;;
    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
  esac
fi

# Check all directory arguments for consistency.
for ac_var in   exec_prefix prefix bindir sbindir libexecdir datarootdir \
        datadir sysconfdir sharedstatedir localstatedir includedir \
        oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
        libdir localedir mandir runstatedir
do
  eval ac_val=\$$ac_var
  # Remove trailing slashes.
  case $ac_val in
    */ )
      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
      eval $ac_var=\$ac_val;;
  esac
  # Be sure to have absolute directory names.
  case $ac_val in
    [\\/$]* | ?:[\\/]* )  continue;;
    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
  esac
  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
done

# There might be people who depend on the old broken behavior: `$host'
# used to hold the argument of --host etc.
# FIXME: To remove some day.
build=$build_alias
host=$host_alias
target=$target_alias

# FIXME: To remove some day.
if test "x$host_alias" != x; then
  if test "x$build_alias" = x; then
    cross_compiling=maybe
  elif test "x$build_alias" != "x$host_alias"; then
    cross_compiling=yes
  fi
fi

ac_tool_prefix=
test -n "$host_alias" && ac_tool_prefix=$host_alias-

test "$silent" = yes && exec 6>/dev/null

ac_pwd=`pwd` && test -n "$ac_pwd" &&
ac_ls_di=`ls -di .` &&
ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
  as_fn_error $? "working directory cannot be determined"
test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
  as_fn_error $? "pwd does not report name of working directory"

# Find the source files, if location was not specified.
if test -z "$srcdir"; then
  ac_srcdir_defaulted=yes
  # Try the directory containing this script, then the parent directory.
  ac_confdir=`$as_dirname -- "$as_myself" ||
$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
     X"$as_myself" : 'X\(//\)[^/]' \| \
     X"$as_myself" : 'X\(//\)$' \| \
     X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$as_myself" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
        s//\1/
        q
      }
      /^X\(\/\/\)[^/].*/{
        s//\1/
        q
      }
      /^X\(\/\/\)$/{
        s//\1/
        q
      }
      /^X\(\/\).*/{
        s//\1/
        q
      }
      s/.*/./; q'`
  srcdir=$ac_confdir
  if test ! -r "$srcdir/$ac_unique_file"; then
    srcdir=..
  fi
else
  ac_srcdir_defaulted=no
fi
if test ! -r "$srcdir/$ac_unique_file"; then
  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
fi
ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
ac_abs_confdir=`(
    cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
    pwd)`
# When building in place, set srcdir=.
if test "$ac_abs_confdir" = "$ac_pwd"; then
  srcdir=.
fi
# Remove unnecessary trailing slashes from srcdir.
# Double slashes in file names in object file debugging info
# mess up M-x gdb in Emacs.
case $srcdir in
*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
esac
for ac_var in $ac_precious_vars; do
  eval ac_env_${ac_var}_set=\${${ac_var}+set}
  eval ac_env_${ac_var}_value=\$${ac_var}
  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
  eval ac_cv_env_${ac_var}_value=\$${ac_var}
done

#
# Report the --help message.
#
if test "$ac_init_help" = "long"; then
  # Omit some internal or obsolete options to make the list less imposing.
  # This message is too long to be a string in the A/UX 3.1 sh.
  cat <<_ACEOF
\`configure' configures this package to adapt to many kinds of systems.

Usage: $0 [OPTION]... [VAR=VALUE]...

To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE.  See below for descriptions of some of the useful variables.

Defaults for the options are specified in brackets.

Configuration:
  -h, --help              display this help and exit
      --help=short        display options specific to this package
      --help=recursive    display the short help of all the included packages
  -V, --version           display version information and exit
  -q, --quiet, --silent   do not print \`checking ...' messages
      --cache-file=FILE   cache test results in FILE [disabled]
  -C, --config-cache      alias for \`--cache-file=config.cache'
  -n, --no-create         do not create output files
      --srcdir=DIR        find the sources in DIR [configure dir or \`..']

Installation directories:
  --prefix=PREFIX         install architecture-independent files in PREFIX
                          [$ac_default_prefix]
  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
                          [PREFIX]

By default, \`make install' will install all the files in
\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
an installation prefix other than \`$ac_default_prefix' using \`--prefix',
for instance \`--prefix=\$HOME'.

For better control, use the options below.

Fine tuning of the installation directories:
  --bindir=DIR            user executables [EPREFIX/bin]
  --sbindir=DIR           system admin executables [EPREFIX/sbin]
  --libexecdir=DIR        program executables [EPREFIX/libexec]
  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
  --runstatedir=DIR       modifiable per-process data [LOCALSTATEDIR/run]
  --libdir=DIR            object code libraries [EPREFIX/lib]
  --includedir=DIR        C header files [PREFIX/include]
  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
  --infodir=DIR           info documentation [DATAROOTDIR/info]
  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
  --mandir=DIR            man documentation [DATAROOTDIR/man]
  --docdir=DIR            documentation root [DATAROOTDIR/doc/PACKAGE]
  --htmldir=DIR           html documentation [DOCDIR]
  --dvidir=DIR            dvi documentation [DOCDIR]
  --pdfdir=DIR            pdf documentation [DOCDIR]
  --psdir=DIR             ps documentation [DOCDIR]
_ACEOF

  cat <<\_ACEOF

System types:
  --build=BUILD     configure for building on BUILD [guessed]
  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
  --target=TARGET   configure for building compilers for TARGET [HOST]
_ACEOF
fi

if test -n "$ac_init_help"; then

  cat <<\_ACEOF

Optional Features and Packages:
  --disable-option-checking  ignore unrecognized --enable/--with options
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
  --with-libdir=NAME      Look for libraries in .../NAME rather than .../lib
  --with-php-config=PATH  Path to php-config [php-config]
  --with-pdo-oci[=DIR]    PDO: Oracle OCI support. DIR defaults to
                          $ORACLE_HOME. Use
                          --with-pdo-oci=instantclient,/path/to/instant/client/lib
                          for an Oracle Instant Client installation.
  --enable-shared=PKGS    Build shared libraries default=yes
  --enable-static=PKGS    Build static libraries default=yes
  --enable-fast-install=PKGS
                          Optimize for fast installation default=yes
  --with-gnu-ld           Assume the C compiler uses GNU ld default=no
  --disable-libtool-lock  Avoid locking (might break parallel builds)
  --with-pic              Try to use only PIC/non-PIC objects default=use both
  --with-tags=TAGS        Include additional configurations automatic

Some influential environment variables:
  PKG_CONFIG  path to pkg-config utility
  PKG_CONFIG_PATH
              directories to add to pkg-config's search path
  PKG_CONFIG_LIBDIR
              path overriding pkg-config's built-in search path
  CC          C compiler command
  CFLAGS      C compiler flags
  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
              nonstandard directory <lib dir>
  LIBS        libraries to pass to the linker, e.g. -l<library>
  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
              you have headers in a nonstandard directory <include dir>
  CPP         C preprocessor

Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.

Report bugs to the package provider.
_ACEOF
ac_status=$?
fi

if test "$ac_init_help" = "recursive"; then
  # If there are subdirs, report their specific --help.
  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
    test -d "$ac_dir" ||
      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
      continue
    ac_builddir=.

case "$ac_dir" in
.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
*)
  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
  # A ".." for each directory in $ac_dir_suffix.
  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
  case $ac_top_builddir_sub in
  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
  esac ;;
esac
ac_abs_top_builddir=$ac_pwd
ac_abs_builddir=$ac_pwd$ac_dir_suffix
# for backward compatibility:
ac_top_builddir=$ac_top_build_prefix

case $srcdir in
  .)  # We are building in place.
    ac_srcdir=.
    ac_top_srcdir=$ac_top_builddir_sub
    ac_abs_top_srcdir=$ac_pwd ;;
  [\\/]* | ?:[\\/]* )  # Absolute name.
    ac_srcdir=$srcdir$ac_dir_suffix;
    ac_top_srcdir=$srcdir
    ac_abs_top_srcdir=$srcdir ;;
  *) # Relative name.
    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
    ac_top_srcdir=$ac_top_build_prefix$srcdir
    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix

    cd "$ac_dir" || { ac_status=$?; continue; }
    # Check for guested configure.
    if test -f "$ac_srcdir/configure.gnu"; then
      echo &&
      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
    elif test -f "$ac_srcdir/configure"; then
      echo &&
      $SHELL "$ac_srcdir/configure" --help=recursive
    else
      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
    fi || ac_status=$?
    cd "$ac_pwd" || { ac_status=$?; break; }
  done
fi

test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
  cat <<\_ACEOF
configure
generated by GNU Autoconf 2.69

Copyright (C) 2012 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
  exit
fi

## ------------------------ ##
## Autoconf initialization. ##
## ------------------------ ##

# ac_fn_c_try_compile LINENO
# --------------------------
# Try to compile conftest.$ac_ext, and return whether this succeeded.
ac_fn_c_try_compile ()
{
  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
  rm -f conftest.$ac_objext
  if { { ac_try="$ac_compile"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
  (eval "$ac_compile") 2>conftest.err
  ac_status=$?
  if test -s conftest.err; then
    grep -v '^ *+' conftest.err >conftest.er1
    cat conftest.er1 >&5
    mv -f conftest.er1 conftest.err
  fi
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; } && {
     test -z "$ac_c_werror_flag" ||
     test ! -s conftest.err
       } && test -s conftest.$ac_objext; then :
  ac_retval=0
else
  $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

    ac_retval=1
fi
  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
  as_fn_set_status $ac_retval

} # ac_fn_c_try_compile

# ac_fn_c_try_cpp LINENO
# ----------------------
# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
ac_fn_c_try_cpp ()
{
  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
  if { { ac_try="$ac_cpp conftest.$ac_ext"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
  ac_status=$?
  if test -s conftest.err; then
    grep -v '^ *+' conftest.err >conftest.er1
    cat conftest.er1 >&5
    mv -f conftest.er1 conftest.err
  fi
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; } > conftest.i && {
     test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
     test ! -s conftest.err
       }; then :
  ac_retval=0
else
  $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

    ac_retval=1
fi
  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
  as_fn_set_status $ac_retval

} # ac_fn_c_try_cpp

# ac_fn_c_try_link LINENO
# -----------------------
# Try to link conftest.$ac_ext, and return whether this succeeded.
ac_fn_c_try_link ()
{
  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
  rm -f conftest.$ac_objext conftest$ac_exeext
  if { { ac_try="$ac_link"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
  (eval "$ac_link") 2>conftest.err
  ac_status=$?
  if test -s conftest.err; then
    grep -v '^ *+' conftest.err >conftest.er1
    cat conftest.er1 >&5
    mv -f conftest.er1 conftest.err
  fi
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; } && {
     test -z "$ac_c_werror_flag" ||
     test ! -s conftest.err
       } && test -s conftest$ac_exeext && {
     test "$cross_compiling" = yes ||
     test -x conftest$ac_exeext
       }; then :
  ac_retval=0
else
  $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

    ac_retval=1
fi
  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
  # interfere with the next link command; also delete a directory that is
  # left behind by Apple's compiler.  We do this before executing the actions.
  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
  as_fn_set_status $ac_retval

} # ac_fn_c_try_link

# ac_fn_c_try_run LINENO
# ----------------------
# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
# that executables *can* be run.
ac_fn_c_try_run ()
{
  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
  if { { ac_try="$ac_link"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
  (eval "$ac_link") 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
  { { case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
  (eval "$ac_try") 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; }; }; then :
  ac_retval=0
else
  $as_echo "$as_me: program exited with status $ac_status" >&5
       $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

       ac_retval=$ac_status
fi
  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
  as_fn_set_status $ac_retval

} # ac_fn_c_try_run

# ac_fn_c_compute_int LINENO EXPR VAR INCLUDES
# --------------------------------------------
# Tries to find the compile-time value of EXPR in a program that includes
# INCLUDES, setting VAR accordingly. Returns whether the value could be
# computed
ac_fn_c_compute_int ()
{
  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
  if test "$cross_compiling" = yes; then
    # Depending upon the size, compute the lo and hi bounds.
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
$4
int
main ()
{
static int test_array [1 - 2 * !(($2) >= 0)];
test_array [0] = 0;
return test_array [0];

  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
  ac_lo=0 ac_mid=0
  while :; do
    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
$4
int
main ()
{
static int test_array [1 - 2 * !(($2) <= $ac_mid)];
test_array [0] = 0;
return test_array [0];

  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
  ac_hi=$ac_mid; break
else
  as_fn_arith $ac_mid + 1 && ac_lo=$as_val
            if test $ac_lo -le $ac_mid; then
              ac_lo= ac_hi=
              break
            fi
            as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
  done
else
  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
$4
int
main ()
{
static int test_array [1 - 2 * !(($2) < 0)];
test_array [0] = 0;
return test_array [0];

  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
  ac_hi=-1 ac_mid=-1
  while :; do
    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
$4
int
main ()
{
static int test_array [1 - 2 * !(($2) >= $ac_mid)];
test_array [0] = 0;
return test_array [0];

  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
  ac_lo=$ac_mid; break
else
  as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val
            if test $ac_mid -le $ac_hi; then
              ac_lo= ac_hi=
              break
            fi
            as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
  done
else
  ac_lo= ac_hi=
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
# Binary search between lo and hi bounds.
while test "x$ac_lo" != "x$ac_hi"; do
  as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val
  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
$4
int
main ()
{
static int test_array [1 - 2 * !(($2) <= $ac_mid)];
test_array [0] = 0;
return test_array [0];

  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
  ac_hi=$ac_mid
else
  as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
done
case $ac_lo in #((
?*) eval "$3=\$ac_lo"; ac_retval=0 ;;
'') ac_retval=1 ;;
esac
  else
    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
$4
static long int longval () { return $2; }
static unsigned long int ulongval () { return $2; }
#include <stdio.h>
#include <stdlib.h>
int
main ()
{

  FILE *f = fopen ("conftest.val", "w");
  if (! f)
    return 1;
  if (($2) < 0)
    {
      long int i = longval ();
      if (i != ($2))
    return 1;
      fprintf (f, "%ld", i);
    }
  else
    {
      unsigned long int i = ulongval ();
      if (i != ($2))
    return 1;
      fprintf (f, "%lu", i);
    }
  /* Do not output a trailing newline, as this causes \r\n confusion
     on some platforms.  */
  return ferror (f) || fclose (f) != 0;

  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_run "$LINENO"; then :
  echo >>conftest.val; read $3 <conftest.val; ac_retval=0
else
  ac_retval=1
fi
rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
  conftest.$ac_objext conftest.beam conftest.$ac_ext
rm -f conftest.val

  fi
  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
  as_fn_set_status $ac_retval

} # ac_fn_c_compute_int

# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
# -------------------------------------------------------
# Tests whether HEADER exists and can be compiled using the include files in
# INCLUDES, setting the cache variable VAR accordingly.
ac_fn_c_check_header_compile ()
{
  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
if eval \${$3+:} false; then :
  $as_echo_n "(cached) " >&6
else
  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
$4
#include <$2>
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
  eval "$3=yes"
else
  eval "$3=no"
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
eval ac_res=\$$3
           { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno

} # ac_fn_c_check_header_compile

# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
# -------------------------------------------------------
# Tests whether HEADER exists, giving a warning if it cannot be compiled using
# the include files in INCLUDES and setting the cache variable VAR
# accordingly.
ac_fn_c_check_header_mongrel ()
{
  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
  if eval \${$3+:} false; then :
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
if eval \${$3+:} false; then :
  $as_echo_n "(cached) " >&6
fi
eval ac_res=\$$3
           { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
else
  # Is the header compilable?
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
$as_echo_n "checking $2 usability... " >&6; }
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
$4
#include <$2>
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
  ac_header_compiler=yes
else
  ac_header_compiler=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
$as_echo "$ac_header_compiler" >&6; }

# Is the header present?
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
$as_echo_n "checking $2 presence... " >&6; }
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
#include <$2>
_ACEOF
if ac_fn_c_try_cpp "$LINENO"; then :
  ac_header_preproc=yes
else
  ac_header_preproc=no
fi
rm -f conftest.err conftest.i conftest.$ac_ext
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
$as_echo "$ac_header_preproc" >&6; }

# So?  What about this header?
case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
  yes:no: )
    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
    ;;
  no:yes:* )
    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     check for missing prerequisite headers?" >&5
$as_echo "$as_me: WARNING: $2:     check for missing prerequisite headers?" >&2;}
    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&5
$as_echo "$as_me: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&2;}
    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
    ;;
esac
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
if eval \${$3+:} false; then :
  $as_echo_n "(cached) " >&6
else
  eval "$3=\$ac_header_compiler"
fi
eval ac_res=\$$3
           { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
fi
  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno

} # ac_fn_c_check_header_mongrel

# ac_fn_c_check_func LINENO FUNC VAR
# ----------------------------------
# Tests whether FUNC exists, setting the cache variable VAR accordingly
ac_fn_c_check_func ()
{
  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
if eval \${$3+:} false; then :
  $as_echo_n "(cached) " >&6
else
  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
#define $2 innocuous_$2

/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $2 (); below.
    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
    <limits.h> exists even on freestanding compilers.  */

#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif

#undef $2

/* Override any GCC internal prototype to avoid an error.
   Use char because int might match the return type of a GCC
   builtin and then its argument prototype would still apply.  */
#ifdef __cplusplus
extern "C"
#endif
char $2 ();
/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined __stub_$2 || defined __stub___$2
choke me
#endif

int
main ()
{
return $2 ();
  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
  eval "$3=yes"
else
  eval "$3=no"
fi
rm -f core conftest.err conftest.$ac_objext \
    conftest$ac_exeext conftest.$ac_ext
fi
eval ac_res=\$$3
           { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno

} # ac_fn_c_check_func
cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by $as_me, which was
generated by GNU Autoconf 2.69.  Invocation command line was

  $ $0 $@

_ACEOF
exec 5>>config.log
{
cat <<_ASUNAME
## --------- ##
## Platform. ##
## --------- ##

hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
uname -m = `(uname -m) 2>/dev/null || echo unknown`
uname -r = `(uname -r) 2>/dev/null || echo unknown`
uname -s = `(uname -s) 2>/dev/null || echo unknown`
uname -v = `(uname -v) 2>/dev/null || echo unknown`

/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`

/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`

_ASUNAME

as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    $as_echo "PATH: $as_dir"
  done
IFS=$as_save_IFS

} >&5

cat >&5 <<_ACEOF

## ----------- ##
## Core tests. ##
## ----------- ##

_ACEOF

# Keep a trace of the command line.
# Strip out --no-create and --no-recursion so they do not pile up.
# Strip out --silent because we don't want to record it for future runs.
# Also quote any args containing shell meta-characters.
# Make two passes to allow for proper duplicate-argument suppression.
ac_configure_args=
ac_configure_args0=
ac_configure_args1=
ac_must_keep_next=false
for ac_pass in 1 2
do
  for ac_arg
  do
    case $ac_arg in
    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
    | -silent | --silent | --silen | --sile | --sil)
      continue ;;
    *\'*)
      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
    esac
    case $ac_pass in
    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
    2)
      as_fn_append ac_configure_args1 " '$ac_arg'"
      if test $ac_must_keep_next = true; then
    ac_must_keep_next=false # Got value, back to normal.
      else
    case $ac_arg in
      *=* | --config-cache | -C | -disable-* | --disable-* \
      | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
      | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
      | -with-* | --with-* | -without-* | --without-* | --x)
        case "$ac_configure_args0 " in
          "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
        esac
        ;;
      -* ) ac_must_keep_next=true ;;
    esac
      fi
      as_fn_append ac_configure_args " '$ac_arg'"
      ;;
    esac
  done
done
{ ac_configure_args0=; unset ac_configure_args0;}
{ ac_configure_args1=; unset ac_configure_args1;}

# When interrupted or exit'd, cleanup temporary files, and complete
# config.log.  We remove comments because anyway the quotes in there
# would cause problems or look ugly.
# WARNING: Use '\'' to represent an apostrophe within the trap.
# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
trap 'exit_status=$?
  # Save into config.log some information that might help in debugging.
  {
    echo

    $as_echo "## ---------------- ##
## Cache variables. ##
## ---------------- ##"
    echo
    # The following way of writing the cache mishandles newlines in values,
(
  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
    eval ac_val=\$$ac_var
    case $ac_val in #(
    *${as_nl}*)
      case $ac_var in #(
      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
      esac
      case $ac_var in #(
      _ | IFS | as_nl) ;; #(
      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
      *) { eval $ac_var=; unset $ac_var;} ;;
      esac ;;
    esac
  done
  (set) 2>&1 |
    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
    *${as_nl}ac_space=\ *)
      sed -n \
    "s/'\''/'\''\\\\'\'''\''/g;
      s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
      ;; #(
    *)
      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
      ;;
    esac |
    sort
)
    echo

    $as_echo "## ----------------- ##
## Output variables. ##
## ----------------- ##"
    echo
    for ac_var in $ac_subst_vars
    do
      eval ac_val=\$$ac_var
      case $ac_val in
      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
      esac
      $as_echo "$ac_var='\''$ac_val'\''"
    done | sort
    echo

    if test -n "$ac_subst_files"; then
      $as_echo "## ------------------- ##
## File substitutions. ##
## ------------------- ##"
      echo
      for ac_var in $ac_subst_files
      do
    eval ac_val=\$$ac_var
    case $ac_val in
    *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
    esac
    $as_echo "$ac_var='\''$ac_val'\''"
      done | sort
      echo
    fi

    if test -s confdefs.h; then
      $as_echo "## ----------- ##
## confdefs.h. ##
## ----------- ##"
      echo
      cat confdefs.h
      echo
    fi
    test "$ac_signal" != 0 &&
      $as_echo "$as_me: caught signal $ac_signal"
    $as_echo "$as_me: exit $exit_status"
  } >&5
  rm -f core *.core core.conftest.* &&
    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
    exit $exit_status
' 0
for ac_signal in 1 2 13 15; do
  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
done
ac_signal=0

# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -f -r conftest* confdefs.h

$as_echo "/* confdefs.h */" > confdefs.h

# Predefined preprocessor variables.

cat >>confdefs.h <<_ACEOF
#define PACKAGE_NAME "$PACKAGE_NAME"
_ACEOF

cat >>confdefs.h <<_ACEOF
#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
_ACEOF

cat >>confdefs.h <<_ACEOF
#define PACKAGE_VERSION "$PACKAGE_VERSION"
_ACEOF

cat >>confdefs.h <<_ACEOF
#define PACKAGE_STRING "$PACKAGE_STRING"
_ACEOF

cat >>confdefs.h <<_ACEOF
#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
_ACEOF

cat >>confdefs.h <<_ACEOF
#define PACKAGE_URL "$PACKAGE_URL"
_ACEOF

# Let the site file select an alternate cache file if it wants to.
# Prefer an explicitly selected file to automatically selected ones.
ac_site_file1=NONE
ac_site_file2=NONE
if test -n "$CONFIG_SITE"; then
  # We do not want a PATH search for config.site.
  case $CONFIG_SITE in #((
    -*)  ac_site_file1=./$CONFIG_SITE;;
    */*) ac_site_file1=$CONFIG_SITE;;
    *)   ac_site_file1=./$CONFIG_SITE;;
  esac
elif test "x$prefix" != xNONE; then
  ac_site_file1=$prefix/share/config.site
  ac_site_file2=$prefix/etc/config.site
else
  ac_site_file1=$ac_default_prefix/share/config.site
  ac_site_file2=$ac_default_prefix/etc/config.site
fi
for ac_site_file in "$ac_site_file1" "$ac_site_file2"
do
  test "x$ac_site_file" = xNONE && continue
  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
$as_echo "$as_me: loading site script $ac_site_file" >&6;}
    sed 's/^/| /' "$ac_site_file" >&5
    . "$ac_site_file" \
      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "failed to load site script $ac_site_file
See \`config.log' for more details" "$LINENO" 5; }
  fi
done

if test -r "$cache_file"; then
  # Some versions of bash will fail to source /dev/null (special files
  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
$as_echo "$as_me: loading cache $cache_file" >&6;}
    case $cache_file in
      [\\/]* | ?:[\\/]* ) . "$cache_file";;
      *)                      . "./$cache_file";;
    esac
  fi
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
$as_echo "$as_me: creating cache $cache_file" >&6;}
  >$cache_file
fi

# Check that the precious variables saved in the cache have kept the same
# value.
ac_cache_corrupted=false
for ac_var in $ac_precious_vars; do
  eval ac_old_set=\$ac_cv_env_${ac_var}_set
  eval ac_new_set=\$ac_env_${ac_var}_set
  eval ac_old_val=\$ac_cv_env_${ac_var}_value
  eval ac_new_val=\$ac_env_${ac_var}_value
  case $ac_old_set,$ac_new_set in
    set,)
      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
      ac_cache_corrupted=: ;;
    ,set)
      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
      ac_cache_corrupted=: ;;
    ,);;
    *)
      if test "x$ac_old_val" != "x$ac_new_val"; then
    # differences in whitespace do not lead to failure.
    ac_old_val_w=`echo x $ac_old_val`
    ac_new_val_w=`echo x $ac_new_val`
    if test "$ac_old_val_w" != "$ac_new_val_w"; then
      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
      ac_cache_corrupted=:
    else
      { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
      eval $ac_var=\$ac_old_val
    fi
    { $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
    { $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
      fi;;
  esac
  # Pass precious variables to config.status.
  if test "$ac_new_set" = set; then
    case $ac_new_val in
    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
    *) ac_arg=$ac_var=$ac_new_val ;;
    esac
    case " $ac_configure_args " in
      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
    esac
  fi
done
if $ac_cache_corrupted; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
fi
## -------------------- ##
## Main body of script. ##
## -------------------- ##

ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu

ac_aux_dir=
for ac_dir in build "$srcdir"/build; do
  if test -f "$ac_dir/install-sh"; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install-sh -c"
    break
  elif test -f "$ac_dir/install.sh"; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install.sh -c"
    break
  elif test -f "$ac_dir/shtool"; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/shtool install -c"
    break
  fi
done
if test -z "$ac_aux_dir"; then
  as_fn_error $? "cannot find install-sh, install.sh, or shtool in build \"$srcdir\"/build" "$LINENO" 5
fi

# These three variables are undocumented and unsupported,
# and are intended to be withdrawn in a future Autoconf release.
# They can cause serious problems if a builder's source tree is in a directory
# whose full name contains unusual characters.
ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
if ${ac_cv_path_GREP+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test -z "$GREP"; then
  ac_path_GREP_found=false
  # Loop through the user's path and test for each of PROGNAME-LIST
  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    for ac_prog in grep ggrep; do
    for ac_exec_ext in '' $ac_executable_extensions; do
      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
      as_fn_executable_p "$ac_path_GREP" || continue
# Check for GNU ac_path_GREP and select it if it is found.
  # Check for GNU $ac_path_GREP
case `"$ac_path_GREP" --version 2>&1` in
*GNU*)
  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
*)
  ac_count=0
  $as_echo_n 0123456789 >"conftest.in"
  while :
  do
    cat "conftest.in" "conftest.in" >"conftest.tmp"
    mv "conftest.tmp" "conftest.in"
    cp "conftest.in" "conftest.nl"
    $as_echo 'GREP' >> "conftest.nl"
    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
    as_fn_arith $ac_count + 1 && ac_count=$as_val
    if test $ac_count -gt ${ac_path_GREP_max-0}; then
      # Best one so far, save it but keep looking for a better one
      ac_cv_path_GREP="$ac_path_GREP"
      ac_path_GREP_max=$ac_count
    fi
    # 10*(2^10) chars as input seems more than enough
    test $ac_count -gt 10 && break
  done
  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
esac

      $ac_path_GREP_found && break 3
    done
  done
  done
IFS=$as_save_IFS
  if test -z "$ac_cv_path_GREP"; then
    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
  fi
else
  ac_cv_path_GREP=$GREP
fi

fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
$as_echo "$ac_cv_path_GREP" >&6; }
 GREP="$ac_cv_path_GREP"

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
$as_echo_n "checking for egrep... " >&6; }
if ${ac_cv_path_EGREP+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
   then ac_cv_path_EGREP="$GREP -E"
   else
     if test -z "$EGREP"; then
  ac_path_EGREP_found=false
  # Loop through the user's path and test for each of PROGNAME-LIST
  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    for ac_prog in egrep; do
    for ac_exec_ext in '' $ac_executable_extensions; do
      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
      as_fn_executable_p "$ac_path_EGREP" || continue
# Check for GNU ac_path_EGREP and select it if it is found.
  # Check for GNU $ac_path_EGREP
case `"$ac_path_EGREP" --version 2>&1` in
*GNU*)
  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
*)
  ac_count=0
  $as_echo_n 0123456789 >"conftest.in"
  while :
  do
    cat "conftest.in" "conftest.in" >"conftest.tmp"
    mv "conftest.tmp" "conftest.in"
    cp "conftest.in" "conftest.nl"
    $as_echo 'EGREP' >> "conftest.nl"
    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
    as_fn_arith $ac_count + 1 && ac_count=$as_val
    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
      # Best one so far, save it but keep looking for a better one
      ac_cv_path_EGREP="$ac_path_EGREP"
      ac_path_EGREP_max=$ac_count
    fi
    # 10*(2^10) chars as input seems more than enough
    test $ac_count -gt 10 && break
  done
  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
esac

      $ac_path_EGREP_found && break 3
    done
  done
  done
IFS=$as_save_IFS
  if test -z "$ac_cv_path_EGREP"; then
    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
  fi
else
  ac_cv_path_EGREP=$EGREP
fi

   fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
$as_echo "$ac_cv_path_EGREP" >&6; }
 EGREP="$ac_cv_path_EGREP"

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
$as_echo_n "checking for a sed that does not truncate output... " >&6; }
if ${ac_cv_path_SED+:} false; then :
  $as_echo_n "(cached) " >&6
else
            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
     for ac_i in 1 2 3 4 5 6 7; do
       ac_script="$ac_script$as_nl$ac_script"
     done
     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
     { ac_script=; unset ac_script;}
     if test -z "$SED"; then
  ac_path_SED_found=false
  # Loop through the user's path and test for each of PROGNAME-LIST
  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    for ac_prog in sed gsed; do
    for ac_exec_ext in '' $ac_executable_extensions; do
      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
      as_fn_executable_p "$ac_path_SED" || continue
# Check for GNU ac_path_SED and select it if it is found.
  # Check for GNU $ac_path_SED
case `"$ac_path_SED" --version 2>&1` in
*GNU*)
  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
*)
  ac_count=0
  $as_echo_n 0123456789 >"conftest.in"
  while :
  do
    cat "conftest.in" "conftest.in" >"conftest.tmp"
    mv "conftest.tmp" "conftest.in"
    cp "conftest.in" "conftest.nl"
    $as_echo '' >> "conftest.nl"
    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
    as_fn_arith $ac_count + 1 && ac_count=$as_val
    if test $ac_count -gt ${ac_path_SED_max-0}; then
      # Best one so far, save it but keep looking for a better one
      ac_cv_path_SED="$ac_path_SED"
      ac_path_SED_max=$ac_count
    fi
    # 10*(2^10) chars as input seems more than enough
    test $ac_count -gt 10 && break
  done
  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
esac

      $ac_path_SED_found && break 3
    done
  done
  done
IFS=$as_save_IFS
  if test -z "$ac_cv_path_SED"; then
    as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
  fi
else
  ac_cv_path_SED=$SED
fi

fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
$as_echo "$ac_cv_path_SED" >&6; }
 SED="$ac_cv_path_SED"
  rm -f conftest.sed

  PHP_VAR_SUBST="$PHP_VAR_SUBST EGREP"

  PHP_VAR_SUBST="$PHP_VAR_SUBST SED"

  test -f config.nice && mv config.nice config.nice.old
  rm -f config.nice.old
  cat >config.nice<<EOF
#! /bin/sh
#
# Created by configure

EOF

  clean_configure_args=$ac_configure_args
  for var in CFLAGS CXXFLAGS CPPFLAGS LDFLAGS EXTRA_LDFLAGS_PROGRAM LIBS CC CXX; do
    eval val=\$$var
    if test -n "$val"; then
      echo "$var='$val' \\" >> config.nice
      if test `expr "X$ac_configure_args" : ".*${var}.*"` != 0; then
        clean_configure_args=$(echo $clean_configure_args | sed -e "s#'$var=$val'##")
      fi
    fi
  done

  echo "'$0' \\" >> config.nice
  if test `expr " $0" : " '.*"` = 0; then
    CONFIGURE_COMMAND="$CONFIGURE_COMMAND '$0'"
  else
    CONFIGURE_COMMAND="$CONFIGURE_COMMAND $0"
  fi
  CONFIGURE_ARGS="$clean_configure_args"
  while test "X$CONFIGURE_ARGS" != "X";
  do
   if CURRENT_ARG=`expr "X$CONFIGURE_ARGS" : "X *\('[^']*'\)"`
   then
     CONFIGURE_ARGS=`expr "X$CONFIGURE_ARGS" : "X *'[^']*' \(.*\)"`
   elif CURRENT_ARG=`expr "X$CONFIGURE_ARGS" : "X *\([^ ]*\)"`
   then
     CONFIGURE_ARGS=`expr "X$CONFIGURE_ARGS" : "X *[^ ]* \(.*\)"`
     CURRENT_ARG="'$CURRENT_ARG'"
   else
    break
   fi
   $as_echo "$CURRENT_ARG \\" >>config.nice
   CONFIGURE_OPTIONS="$CONFIGURE_OPTIONS $CURRENT_ARG"
  done
  echo '"$@"' >> config.nice
  chmod +x config.nice
  CONFIGURE_COMMAND="$CONFIGURE_COMMAND $CONFIGURE_OPTIONS"

  PHP_VAR_SUBST="$PHP_VAR_SUBST CONFIGURE_COMMAND"

  PHP_VAR_SUBST="$PHP_VAR_SUBST CONFIGURE_OPTIONS"

test -z "$CFLAGS" && auto_cflags=1

abs_srcdir=`(cd $srcdir && pwd)`
abs_builddir=`pwd`

if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
    if test -n "$ac_tool_prefix"; then
  # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_path_PKG_CONFIG+:} false; then :
  $as_echo_n "(cached) " >&6
else
  case $PKG_CONFIG in
  [\\/]* | ?:[\\/]*)
  ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
  ;;
  *)
  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    for ac_exec_ext in '' $ac_executable_extensions; do
  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
  done
IFS=$as_save_IFS

  ;;
esac
fi
PKG_CONFIG=$ac_cv_path_PKG_CONFIG
if test -n "$PKG_CONFIG"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5
$as_echo "$PKG_CONFIG" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi

fi
if test -z "$ac_cv_path_PKG_CONFIG"; then
  ac_pt_PKG_CONFIG=$PKG_CONFIG
  # Extract the first word of "pkg-config", so it can be a program name with args.
set dummy pkg-config; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then :
  $as_echo_n "(cached) " >&6
else
  case $ac_pt_PKG_CONFIG in
  [\\/]* | ?:[\\/]*)
  ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path.
  ;;
  *)
  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    for ac_exec_ext in '' $ac_executable_extensions; do
  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
  done
IFS=$as_save_IFS

  ;;
esac
fi
ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
if test -n "$ac_pt_PKG_CONFIG"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5
$as_echo "$ac_pt_PKG_CONFIG" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi

  if test "x$ac_pt_PKG_CONFIG" = x; then
    PKG_CONFIG=""
  else
    case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
    PKG_CONFIG=$ac_pt_PKG_CONFIG
  fi
else
  PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
fi

fi
if test -n "$PKG_CONFIG"; then
    _pkg_min_version=0.9.0
    { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5
$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; }
    if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
    else
        { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
        PKG_CONFIG=""
    fi
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
if test -n "$ac_tool_prefix"; then
  for ac_prog in cc gcc
  do
    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_CC+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    for ac_exec_ext in '' $ac_executable_extensions; do
  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
  done
IFS=$as_save_IFS

fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
$as_echo "$CC" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi

    test -n "$CC" && break
  done
fi
if test -z "$CC"; then
  ac_ct_CC=$CC
  for ac_prog in cc gcc
do
  # Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_CC+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test -n "$ac_ct_CC"; then
  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    for ac_exec_ext in '' $ac_executable_extensions; do
  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_ac_ct_CC="$ac_prog"
    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
  done
IFS=$as_save_IFS

fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
$as_echo "$ac_ct_CC" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi

  test -n "$ac_ct_CC" && break
done

  if test "x$ac_ct_CC" = x; then
    CC=""
  else
    case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
    CC=$ac_ct_CC
  fi
fi

test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "no acceptable C compiler found in \$PATH
See \`config.log' for more details" "$LINENO" 5; }

# Provide some information about the compiler.
$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
set X $ac_compile
ac_compiler=$2
for ac_option in --version -v -V -qversion; do
  { { ac_try="$ac_compiler $ac_option >&5"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
  ac_status=$?
  if test -s conftest.err; then
    sed '10a\
... rest of stderr output deleted ...
         10q' conftest.err >conftest.er1
    cat conftest.er1 >&5
  fi
  rm -f conftest.er1 conftest.err
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; }
done

cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */

int
main ()
{

  ;
  return 0;
}
_ACEOF
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
# Try to create an executable without -o first, disregard a.out.
# It will help us diagnose broken compilers, and finding out an intuition
# of exeext.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
$as_echo_n "checking whether the C compiler works... " >&6; }
ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`

# The possible output files:
ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"

ac_rmfiles=
for ac_file in $ac_files
do
  case $ac_file in
    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
  esac
done
rm -f $ac_rmfiles

if { { ac_try="$ac_link_default"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
  (eval "$ac_link_default") 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; }; then :
  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
# in a Makefile.  We should not override ac_cv_exeext if it was cached,
# so that the user can short-circuit this test for compilers unknown to
# Autoconf.
for ac_file in $ac_files ''
do
  test -f "$ac_file" || continue
  case $ac_file in
    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
    ;;
    [ab].out )
    # We found the default executable, but exeext='' is most
    # certainly right.
    break;;
    *.* )
    if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
    then :; else
       ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
    fi
    # We set ac_cv_exeext here because the later test for it is not
    # safe: cross compilers may not add the suffix if given an `-o'
    # argument, so we may need to know it at that point already.
    # Even if this section looks crufty: it has the advantage of
    # actually working.
    break;;
    * )
    break;;
  esac
done
test "$ac_cv_exeext" = no && ac_cv_exeext=

else
  ac_file=''
fi
if test -z "$ac_file"; then :
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
$as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error 77 "C compiler cannot create executables
See \`config.log' for more details" "$LINENO" 5; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
$as_echo_n "checking for C compiler default output file name... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
$as_echo "$ac_file" >&6; }
ac_exeext=$ac_cv_exeext

rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
ac_clean_files=$ac_clean_files_save
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
$as_echo_n "checking for suffix of executables... " >&6; }
if { { ac_try="$ac_link"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
  (eval "$ac_link") 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; }; then :
  # If both `conftest.exe' and `conftest' are `present' (well, observable)
# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
# work properly (i.e., refer to `conftest.exe'), while it won't with
# `rm'.
for ac_file in conftest.exe conftest conftest.*; do
  test -f "$ac_file" || continue
  case $ac_file in
    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
      break;;
    * ) break;;
  esac
done
else
  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "cannot compute suffix of executables: cannot compile and link
See \`config.log' for more details" "$LINENO" 5; }
fi
rm -f conftest conftest$ac_cv_exeext
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
$as_echo "$ac_cv_exeext" >&6; }

rm -f conftest.$ac_ext
EXEEXT=$ac_cv_exeext
ac_exeext=$EXEEXT
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
#include <stdio.h>
int
main ()
{
FILE *f = fopen ("conftest.out", "w");
 return ferror (f) || fclose (f) != 0;

  ;
  return 0;
}
_ACEOF
ac_clean_files="$ac_clean_files conftest.out"
# Check that the compiler produces executables we can run.  If not, either
# the compiler is broken, or we cross compile.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
$as_echo_n "checking whether we are cross compiling... " >&6; }
if test "$cross_compiling" != yes; then
  { { ac_try="$ac_link"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
  (eval "$ac_link") 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; }
  if { ac_try='./conftest$ac_cv_exeext'
  { { case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
  (eval "$ac_try") 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; }; }; then
    cross_compiling=no
  else
    if test "$cross_compiling" = maybe; then
    cross_compiling=yes
    else
    { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "cannot run C compiled programs.
If you meant to cross compile, use \`--host'.
See \`config.log' for more details" "$LINENO" 5; }
    fi
  fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
$as_echo "$cross_compiling" >&6; }

rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
ac_clean_files=$ac_clean_files_save
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
$as_echo_n "checking for suffix of object files... " >&6; }
if ${ac_cv_objext+:} false; then :
  $as_echo_n "(cached) " >&6
else
  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */

int
main ()
{

  ;
  return 0;
}
_ACEOF
rm -f conftest.o conftest.obj
if { { ac_try="$ac_compile"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
  (eval "$ac_compile") 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; }; then :
  for ac_file in conftest.o conftest.obj conftest.*; do
  test -f "$ac_file" || continue;
  case $ac_file in
    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
       break;;
  esac
done
else
  $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "cannot compute suffix of object files: cannot compile
See \`config.log' for more details" "$LINENO" 5; }
fi
rm -f conftest.$ac_cv_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
$as_echo "$ac_cv_objext" >&6; }
OBJEXT=$ac_cv_objext
ac_objext=$OBJEXT
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
if ${ac_cv_c_compiler_gnu+:} false; then :
  $as_echo_n "(cached) " >&6
else
  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */

int
main ()
{
#ifndef __GNUC__
       choke me
#endif

  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
  ac_compiler_gnu=yes
else
  ac_compiler_gnu=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
ac_cv_c_compiler_gnu=$ac_compiler_gnu

fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
$as_echo "$ac_cv_c_compiler_gnu" >&6; }
if test $ac_compiler_gnu = yes; then
  GCC=yes
else
  GCC=
fi
ac_test_CFLAGS=${CFLAGS+set}
ac_save_CFLAGS=$CFLAGS
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
$as_echo_n "checking whether $CC accepts -g... " >&6; }
if ${ac_cv_prog_cc_g+:} false; then :
  $as_echo_n "(cached) " >&6
else
  ac_save_c_werror_flag=$ac_c_werror_flag
   ac_c_werror_flag=yes
   ac_cv_prog_cc_g=no
   CFLAGS="-g"
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */

int
main ()
{

  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
  ac_cv_prog_cc_g=yes
else
  CFLAGS=""
      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */

int
main ()
{

  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :

else
  ac_c_werror_flag=$ac_save_c_werror_flag
     CFLAGS="-g"
     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */

int
main ()
{

  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
  ac_cv_prog_cc_g=yes
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
   ac_c_werror_flag=$ac_save_c_werror_flag
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
$as_echo "$ac_cv_prog_cc_g" >&6; }
if test "$ac_test_CFLAGS" = set; then
  CFLAGS=$ac_save_CFLAGS
elif test $ac_cv_prog_cc_g = yes; then
  if test "$GCC" = yes; then
    CFLAGS="-g -O2"
  else
    CFLAGS="-g"
  fi
else
  if test "$GCC" = yes; then
    CFLAGS="-O2"
  else
    CFLAGS=
  fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
if ${ac_cv_prog_cc_c89+:} false; then :
  $as_echo_n "(cached) " >&6
else
  ac_cv_prog_cc_c89=no
ac_save_CC=$CC
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
#include <stdarg.h>
#include <stdio.h>
struct stat;
/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
struct buf { int x; };
FILE * (*rcsopen) (struct buf *, struct stat *, int);
static char *e (p, i)
     char **p;
     int i;
{
  return p[i];
}
static char *f (char * (*g) (char **, int), char **p, ...)
{
  char *s;
  va_list v;
  va_start (v,p);
  s = g (p, va_arg (v,int));
  va_end (v);
  return s;
}

/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
   function prototypes and stuff, but not '\xHH' hex character constants.
   These don't provoke an error unfortunately, instead are silently treated
   as 'x'.  The following induces an error, until -std is added to get
   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
   array size at least.  It's necessary to write '\x00'==0 to get something
   that's true only with -std.  */
int osf4_cc_array ['\x00' == 0 ? 1 : -1];

/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
   inside strings and character constants.  */
#define FOO(x) 'x'
int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];

int test (int i, double x);
struct s1 {int (*f) (int a);};
struct s2 {int (*f) (double a);};
int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
int argc;
char **argv;
int
main ()
{
return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
  ;
  return 0;
}
_ACEOF
for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
    -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
do
  CC="$ac_save_CC $ac_arg"
  if ac_fn_c_try_compile "$LINENO"; then :
  ac_cv_prog_cc_c89=$ac_arg
fi
rm -f core conftest.err conftest.$ac_objext
  test "x$ac_cv_prog_cc_c89" != "xno" && break
done
rm -f conftest.$ac_ext
CC=$ac_save_CC

fi
# AC_CACHE_VAL
case "x$ac_cv_prog_cc_c89" in
  x)
    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
$as_echo "none needed" >&6; } ;;
  xno)
    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
$as_echo "unsupported" >&6; } ;;
  *)
    CC="$CC $ac_cv_prog_cc_c89"
    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
esac
if test "x$ac_cv_prog_cc_c89" != xno; then :

fi

ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu

ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
$as_echo_n "checking how to run the C preprocessor... " >&6; }
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
  CPP=
fi
if test -z "$CPP"; then
  if ${ac_cv_prog_CPP+:} false; then :
  $as_echo_n "(cached) " >&6
else
      # Double quotes because CPP needs to be expanded
    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
    do
      ac_preproc_ok=false
for ac_c_preproc_warn_flag in '' yes
do
  # Use a header file that comes with gcc, so configuring glibc
  # with a fresh cross-compiler works.
  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
  # <limits.h> exists even on freestanding compilers.
  # On the NeXT, cc -E runs the code through the compiler's parser,
  # not just through cpp. "Syntax error" is here to catch this case.
  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif
             Syntax error
_ACEOF
if ac_fn_c_try_cpp "$LINENO"; then :

else
  # Broken: fails on valid input.
continue
fi
rm -f conftest.err conftest.i conftest.$ac_ext

  # OK, works on sane cases.  Now check whether nonexistent headers
  # can be detected and how.
  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
#include <ac_nonexistent.h>
_ACEOF
if ac_fn_c_try_cpp "$LINENO"; then :
  # Broken: success on invalid input.
continue
else
  # Passes both tests.
ac_preproc_ok=:
break
fi
rm -f conftest.err conftest.i conftest.$ac_ext

done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
rm -f conftest.i conftest.err conftest.$ac_ext
if $ac_preproc_ok; then :
  break
fi

    done
    ac_cv_prog_CPP=$CPP

fi
  CPP=$ac_cv_prog_CPP
else
  ac_cv_prog_CPP=$CPP
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
$as_echo "$CPP" >&6; }
ac_preproc_ok=false
for ac_c_preproc_warn_flag in '' yes
do
  # Use a header file that comes with gcc, so configuring glibc
  # with a fresh cross-compiler works.
  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
  # <limits.h> exists even on freestanding compilers.
  # On the NeXT, cc -E runs the code through the compiler's parser,
  # not just through cpp. "Syntax error" is here to catch this case.
  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif
             Syntax error
_ACEOF
if ac_fn_c_try_cpp "$LINENO"; then :

else
  # Broken: fails on valid input.
continue
fi
rm -f conftest.err conftest.i conftest.$ac_ext

  # OK, works on sane cases.  Now check whether nonexistent headers
  # can be detected and how.
  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
#include <ac_nonexistent.h>
_ACEOF
if ac_fn_c_try_cpp "$LINENO"; then :
  # Broken: success on invalid input.
continue
else
  # Passes both tests.
ac_preproc_ok=:
break
fi
rm -f conftest.err conftest.i conftest.$ac_ext

done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
rm -f conftest.i conftest.err conftest.$ac_ext
if $ac_preproc_ok; then :

else
  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
See \`config.log' for more details" "$LINENO" 5; }
fi

ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu

  ICC="no"
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for icc" >&5
$as_echo_n "checking for icc... " >&6; }
  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
__INTEL_COMPILER
_ACEOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  $EGREP "^__INTEL_COMPILER" >/dev/null 2>&1; then :
  ICC="no"
    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
else
  ICC="yes"
    GCC="no"
    { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }

fi
rm -f conftest*

  SUNCC="no"
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suncc" >&5
$as_echo_n "checking for suncc... " >&6; }
  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
__SUNPRO_C
_ACEOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  $EGREP "^__SUNPRO_C" >/dev/null 2>&1; then :
  SUNCC="no"
    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
else
  SUNCC="yes"
    GCC="no"
    test -n "$auto_cflags" && CFLAGS="-O -xs -xstrconst -zlazyload"
    GCC=""
    { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }

fi
rm -f conftest*

php_with_libdir=lib

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for system library directory" >&5
$as_echo_n "checking for system library directory... " >&6; }

# Check whether --with-libdir was given.
if test "${with_libdir+set}" = set; then :
  withval=$with_libdir; PHP_LIBDIR=$withval
else

  PHP_LIBDIR=lib

fi

ext_output=$PHP_LIBDIR
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ext_output" >&5
$as_echo "$ext_output" >&6; }

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if compiler supports -Wl,-rpath," >&5
$as_echo_n "checking if compiler supports -Wl,-rpath,... " >&6; }
if ${php_cv_cc_rpath+:} false; then :
  $as_echo_n "(cached) " >&6
else

  SAVE_LIBS=$LIBS
  LIBS="-Wl,-rpath,/usr/$PHP_LIBDIR $LIBS"
  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */

int
main ()
{

  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
  php_cv_cc_rpath=yes
else
  php_cv_cc_rpath=no
fi
rm -f core conftest.err conftest.$ac_objext \
    conftest$ac_exeext conftest.$ac_ext
  LIBS=$SAVE_LIBS
fi

{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $php_cv_cc_rpath" >&5
$as_echo "$php_cv_cc_rpath" >&6; }
if test $php_cv_cc_rpath = "yes"; then
  ld_runpath_switch=-Wl,-rpath,
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if compiler supports -R" >&5
$as_echo_n "checking if compiler supports -R... " >&6; }
  if ${php_cv_cc_dashr+:} false; then :
  $as_echo_n "(cached) " >&6
else

    SAVE_LIBS=$LIBS
    LIBS="-R /usr/$PHP_LIBDIR $LIBS"
    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */

int
main ()
{

  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
  php_cv_cc_dashr=yes
else
  php_cv_cc_dashr=no
fi
rm -f core conftest.err conftest.$ac_objext \
    conftest$ac_exeext conftest.$ac_ext
    LIBS=$SAVE_LIBS
fi

  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $php_cv_cc_dashr" >&5
$as_echo "$php_cv_cc_dashr" >&6; }
  if test $php_cv_cc_dashr = "yes"; then
    ld_runpath_switch=-R
  else
        ld_runpath_switch=-L
  fi
fi
if test "$PHP_RPATH" = "no"; then
  ld_runpath_switch=
fi

# Make sure we can run config.sub.
$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
$as_echo_n "checking build system type... " >&6; }
if ${ac_cv_build+:} false; then :
  $as_echo_n "(cached) " >&6
else
  ac_build_alias=$build_alias
test "x$ac_build_alias" = x &&
  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
test "x$ac_build_alias" = x &&
  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5

fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
$as_echo "$ac_cv_build" >&6; }
case $ac_cv_build in
*-*-*) ;;
*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
esac
build=$ac_cv_build
ac_save_IFS=$IFS; IFS='-'
set x $ac_cv_build
shift
build_cpu=$1
build_vendor=$2
shift; shift
# Remember, the first character of IFS is used to create $*,
# except with old shells:
build_os=$*
IFS=$ac_save_IFS
case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
$as_echo_n "checking host system type... " >&6; }
if ${ac_cv_host+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test "x$host_alias" = x; then
  ac_cv_host=$ac_cv_build
else
  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
fi

fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
$as_echo "$ac_cv_host" >&6; }
case $ac_cv_host in
*-*-*) ;;
*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
esac
host=$ac_cv_host
ac_save_IFS=$IFS; IFS='-'
set x $ac_cv_host
shift
host_cpu=$1
host_vendor=$2
shift; shift
# Remember, the first character of IFS is used to create $*,
# except with old shells:
host_os=$*
IFS=$ac_save_IFS
case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
$as_echo_n "checking target system type... " >&6; }
if ${ac_cv_target+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test "x$target_alias" = x; then
  ac_cv_target=$ac_cv_host
else
  ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
fi

fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5
$as_echo "$ac_cv_target" >&6; }
case $ac_cv_target in
*-*-*) ;;
*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;;
esac
target=$ac_cv_target
ac_save_IFS=$IFS; IFS='-'
set x $ac_cv_target
shift
target_cpu=$1
target_vendor=$2
shift; shift
# Remember, the first character of IFS is used to create $*,
# except with old shells:
target_os=$*
IFS=$ac_save_IFS
case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac

# The aliases save the names the user supplied, while $host etc.
# will get canonicalized.
test -n "$target_alias" &&
  test "$program_prefix$program_suffix$program_transform_name" = \
    NONENONEs,x,x, &&
  program_prefix=${target_alias}-

        if test -z "$host_alias" && test -n "$host"; then
    host_alias=$host
  fi
  if test -z "$host_alias"; then
    as_fn_error $? "host_alias is not set!" "$LINENO" 5
  fi

  PHP_VAR_SUBST="$PHP_VAR_SUBST SHLIB_SUFFIX_NAME"

  PHP_VAR_SUBST="$PHP_VAR_SUBST SHLIB_DL_SUFFIX_NAME"

 SHLIB_SUFFIX_NAME=so
 SHLIB_DL_SUFFIX_NAME=$SHLIB_SUFFIX_NAME
 case $host_alias in
 *hpux*)
   SHLIB_SUFFIX_NAME=sl
   SHLIB_DL_SUFFIX_NAME=sl
   ;;
 *darwin*)
   SHLIB_SUFFIX_NAME=dylib
   SHLIB_DL_SUFFIX_NAME=so
   ;;
 esac

php_with_php_config=php-config

# Check whether --with-php-config was given.
if test "${with_php_config+set}" = set; then :
  withval=$with_php_config; PHP_PHP_CONFIG=$withval
else

  PHP_PHP_CONFIG=php-config

fi

ext_output=$PHP_PHP_CONFIG

PHP_CONFIG=$PHP_PHP_CONFIG
prefix=`$PHP_CONFIG --prefix 2>/dev/null`
phpincludedir=`$PHP_CONFIG --include-dir 2>/dev/null`
INCLUDES=`$PHP_CONFIG --includes 2>/dev/null`
EXTENSION_DIR=`$PHP_CONFIG --extension-dir 2>/dev/null`
PHP_EXECUTABLE=`$PHP_CONFIG --php-binary 2>/dev/null`

if test -z "$prefix"; then
  as_fn_error $? "Cannot find php-config. Please use --with-php-config=PATH" "$LINENO" 5
fi

php_shtool=$srcdir/build/shtool

test -d include || $php_shtool mkdir include
> Makefile.objects
> Makefile.fragments
pattern=define
$EGREP $pattern'.*include/php' $srcdir/configure|$SED 's/.*>//'|xargs touch 2>/dev/null

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for PHP prefix" >&5
$as_echo_n "checking for PHP prefix... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $prefix" >&5
$as_echo "$prefix" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for PHP includes" >&5
$as_echo_n "checking for PHP includes... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INCLUDES" >&5
$as_echo "$INCLUDES" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for PHP extension directory" >&5
$as_echo_n "checking for PHP extension directory... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $EXTENSION_DIR" >&5
$as_echo "$EXTENSION_DIR" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for PHP installed headers prefix" >&5
$as_echo_n "checking for PHP installed headers prefix... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $phpincludedir" >&5
$as_echo "$phpincludedir" >&6; }

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if debug is enabled" >&5
$as_echo_n "checking if debug is enabled... " >&6; }
old_CPPFLAGS=$CPPFLAGS
CPPFLAGS="-I$phpincludedir"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */

#include <main/php_config.h>
#if ZEND_DEBUG
php_debug_is_enabled
#endif

_ACEOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  $EGREP "php_debug_is_enabled" >/dev/null 2>&1; then :

  PHP_DEBUG=yes

else

  PHP_DEBUG=no

fi
rm -f conftest*

CPPFLAGS=$old_CPPFLAGS
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $PHP_DEBUG" >&5
$as_echo "$PHP_DEBUG" >&6; }

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if zts is enabled" >&5
$as_echo_n "checking if zts is enabled... " >&6; }
old_CPPFLAGS=$CPPFLAGS
CPPFLAGS="-I$phpincludedir"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */

#include <main/php_config.h>
#if ZTS
php_zts_is_enabled
#endif

_ACEOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  $EGREP "php_zts_is_enabled" >/dev/null 2>&1; then :

  PHP_THREAD_SAFETY=yes

else

  PHP_THREAD_SAFETY=no

fi
rm -f conftest*

CPPFLAGS=$old_CPPFLAGS
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $PHP_THREAD_SAFETY" >&5
$as_echo "$PHP_THREAD_SAFETY" >&6; }

if test "$PHP_DEBUG" = "yes"; then
  PHP_DEBUG=1
  ZEND_DEBUG=yes

  CFLAGS=`echo "$CFLAGS" | $SED -e 's/-O[0-9s]*//g'`
  CXXFLAGS=`echo "$CXXFLAGS" | $SED -e 's/-O[0-9s]*//g'`

    if test "$GCC" = "yes" || test "$ICC" = "yes"; then
    CFLAGS="$CFLAGS -O0"
    CXXFLAGS="$CXXFLAGS -g -O0"
  fi
  if test "$SUNCC" = "yes"; then
    if test -n "$auto_cflags"; then
      CFLAGS="-g"
      CXXFLAGS="-g"
    else
      CFLAGS="$CFLAGS -g"
      CXXFLAGS="$CFLAGS -g"
    fi
  fi
else
  PHP_DEBUG=0
  ZEND_DEBUG=no
fi

  php_c_pre='$(LIBTOOL) --tag=CC --mode=compile $(CC)'
  php_c_meta='$(COMMON_FLAGS) $(CFLAGS_CLEAN) $(EXTRA_CFLAGS)'
  php_c_post=
  php_cxx_pre='$(LIBTOOL) --tag=CXX --mode=compile $(CXX)'
  php_cxx_meta='$(COMMON_FLAGS) $(CXXFLAGS_CLEAN) $(EXTRA_CXXFLAGS)'
  php_cxx_post=
  php_lo=lo

  case $with_pic in
    yes) pic_setting='-prefer-pic';;
    no)  pic_setting='-prefer-non-pic';;
  esac

  shared_c_pre='$(LIBTOOL) --tag=CC --mode=compile $(CC)'
  shared_c_meta='$(COMMON_FLAGS) $(CFLAGS_CLEAN) $(EXTRA_CFLAGS) '$pic_setting
  shared_c_post=
  shared_cxx_pre='$(LIBTOOL) --tag=CXX --mode=compile $(CXX)'
  shared_cxx_meta='$(COMMON_FLAGS) $(CXXFLAGS_CLEAN) $(EXTRA_CXXFLAGS) '$pic_setting
  shared_cxx_post=
  shared_lo=lo

  OVERALL_TARGET=libphp.la
  php_sapi_module=shared

  php_c_pre=$shared_c_pre
  php_c_meta=$shared_c_meta
  php_c_post=$shared_c_post
  php_cxx_pre=$shared_cxx_pre
  php_cxx_meta=$shared_cxx_meta
  php_cxx_post=$shared_cxx_post
  php_lo=$shared_lo

  for ac_prog in gawk nawk awk mawk
do
  # Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_AWK+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test -n "$AWK"; then
  ac_cv_prog_AWK="$AWK" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
as_dummy="/usr/xpg4/bin/:$PATH"
for as_dir in $as_dummy
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    for ac_exec_ext in '' $ac_executable_extensions; do
  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_AWK="$ac_prog"
    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
  done
IFS=$as_save_IFS

fi
fi
AWK=$ac_cv_prog_AWK
if test -n "$AWK"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
$as_echo "$AWK" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi

  test -n "$AWK" && break
done
test -n "$AWK" || AWK="bork"

  case "$AWK" in
    *mawk)
      { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: mawk is known to have problems on some systems. You should install GNU awk" >&5
$as_echo "$as_me: WARNING: mawk is known to have problems on some systems. You should install GNU awk" >&2;}
      ;;
    *gawk)
      ;;
    bork)
      as_fn_error $? "Could not find awk; Install GNU awk" "$LINENO" 5
      ;;
    *)
      { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $AWK is broken" >&5
$as_echo_n "checking if $AWK is broken... " >&6; }
      if ! $AWK 'function foo() {}' >/dev/null 2>&1 ; then
        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
        as_fn_error $? "You should install GNU awk" "$LINENO" 5
      else
        { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
      fi
      ;;
  esac

  PHP_VAR_SUBST="$PHP_VAR_SUBST AWK"

if test -z "$SED"; then
  PHP_PDO_OCI_SED="sed";
else
  PHP_PDO_OCI_SED="$SED";
fi

PHP_PDO_OCI_TAIL1=`echo a | tail -n1 2>/dev/null`
if test "$PHP_PDO_OCI_TAIL1" = "a"; then
    PHP_PDO_OCI_TAIL1="tail -n1"
else
    PHP_PDO_OCI_TAIL1="tail -1"
fi

php_with_pdo_oci=no

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking Oracle OCI support for PDO" >&5
$as_echo_n "checking Oracle OCI support for PDO... " >&6; }

# Check whether --with-pdo-oci was given.
if test "${with_pdo_oci+set}" = set; then :
  withval=$with_pdo_oci; PHP_PDO_OCI=$withval
else

  PHP_PDO_OCI=no
  test "$PHP_ENABLE_ALL" && PHP_PDO_OCI=$PHP_ENABLE_ALL

fi

ext_output="yes, shared"
ext_shared=yes
case $PHP_PDO_OCI in
shared,*)
  PHP_PDO_OCI=`echo "$PHP_PDO_OCI"|$SED 's/^shared,//'`
  ;;
shared)
  PHP_PDO_OCI=yes
  ;;
no)
  ext_output=no
  ext_shared=no
  ;;
*)
  ext_output=yes
  ext_shared=no
  ;;
esac

  ext_output="yes, shared"
  ext_shared=yes
  test "$PHP_PDO_OCI" = "no" && PHP_PDO_OCI=yes

{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ext_output" >&5
$as_echo "$ext_output" >&6; }

if test "$PHP_PDO_OCI" != "no"; then

  if test "$PHP_PDO" = "no" && test "$ext_shared" = "no"; then
    as_fn_error $? "PDO is not enabled! Add --enable-pdo to your configure line." "$LINENO" 5
  fi

  { $as_echo "$as_me:${as_lineno-$LINENO}: checking Oracle Install-Dir" >&5
$as_echo_n "checking Oracle Install-Dir... " >&6; }
  if test "$PHP_PDO_OCI" = "yes" || test -z "$PHP_PDO_OCI"; then
    PDO_OCI_DIR=$ORACLE_HOME
  else
    PDO_OCI_DIR=$PHP_PDO_OCI
  fi
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PHP_PDO_OCI" >&5
$as_echo "$PHP_PDO_OCI" >&6; }

  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if that is sane" >&5
$as_echo_n "checking if that is sane... " >&6; }
  if test -z "$PDO_OCI_DIR"; then
    as_fn_error $? "You need to tell me where to find your Oracle Instant Client SDK, or set ORACLE_HOME." "$LINENO" 5
  else
    { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
  fi

  if test "instantclient" = "`echo $PDO_OCI_DIR | cut -d, -f1`" ; then
    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
$as_echo_n "checking for ANSI C header files... " >&6; }
if ${ac_cv_header_stdc+:} false; then :
  $as_echo_n "(cached) " >&6
else
  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
#include <stdlib.h>
#include <stdarg.h>
#include <string.h>
#include <float.h>

int
main ()
{

  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
  ac_cv_header_stdc=yes
else
  ac_cv_header_stdc=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext

if test $ac_cv_header_stdc = yes; then
  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
#include <string.h>

_ACEOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  $EGREP "memchr" >/dev/null 2>&1; then :

else
  ac_cv_header_stdc=no
fi
rm -f conftest*

fi

if test $ac_cv_header_stdc = yes; then
  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
#include <stdlib.h>

_ACEOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  $EGREP "free" >/dev/null 2>&1; then :

else
  ac_cv_header_stdc=no
fi
rm -f conftest*

fi

if test $ac_cv_header_stdc = yes; then
  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
  if test "$cross_compiling" = yes; then :
  :
else
  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
#include <ctype.h>
#include <stdlib.h>
#if ((' ' & 0x0FF) == 0x020)
# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
#else
# define ISLOWER(c) \
           (('a' <= (c) && (c) <= 'i') \
             || ('j' <= (c) && (c) <= 'r') \
             || ('s' <= (c) && (c) <= 'z'))
# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
#endif

#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
int
main ()
{
  int i;
  for (i = 0; i < 256; i++)
    if (XOR (islower (i), ISLOWER (i))
    || toupper (i) != TOUPPER (i))
      return 2;
  return 0;
}
_ACEOF
if ac_fn_c_try_run "$LINENO"; then :

else
  ac_cv_header_stdc=no
fi
rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
  conftest.$ac_objext conftest.beam conftest.$ac_ext
fi

fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
$as_echo "$ac_cv_header_stdc" >&6; }
if test $ac_cv_header_stdc = yes; then

$as_echo "#define STDC_HEADERS 1" >>confdefs.h

fi

# On IRIX 5.3, sys/types and inttypes.h are conflicting.
for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
          inttypes.h stdint.h unistd.h
do :
  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
"
if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
  cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF

fi

done

# The cast to long int works around a bug in the HP C Compiler
# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
# This bug is HP SR number 8606223364.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long" >&5
$as_echo_n "checking size of long... " >&6; }
if ${ac_cv_sizeof_long+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (long))" "ac_cv_sizeof_long"        "$ac_includes_default"; then :

else
  if test "$ac_cv_type_long" = yes; then
     { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error 77 "cannot compute sizeof (long)
See \`config.log' for more details" "$LINENO" 5; }
   else
     ac_cv_sizeof_long=0
   fi
fi

fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_long" >&5
$as_echo "$ac_cv_sizeof_long" >&6; }

cat >>confdefs.h <<_ACEOF
#define SIZEOF_LONG $ac_cv_sizeof_long
_ACEOF

    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we're at 64-bit platform" >&5
$as_echo_n "checking if we're at 64-bit platform... " >&6; }
    if test "$ac_cv_sizeof_long" -eq 4; then :

      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
      PDO_OCI_CLIENT_DIR="client"

else

      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
      PDO_OCI_CLIENT_DIR="client64"

fi

    PDO_OCI_LIB_DIR="`echo $PDO_OCI_DIR | cut -d, -f2`"

  { $as_echo "$as_me:${as_lineno-$LINENO}: checking Oracle version" >&5
$as_echo_n "checking Oracle version... " >&6; }
  PDO_OCI_LCS_BASE=$PDO_OCI_LIB_DIR/libclntsh.$SHLIB_SUFFIX_NAME
    PDO_OCI_LCS=`ls $PDO_OCI_LCS_BASE.*.1 2> /dev/null | $PHP_PDO_OCI_TAIL1`
  if test -f "$PDO_OCI_LCS"; then
            PDO_OCI_VERSION=`echo $PDO_OCI_LCS | $PHP_PDO_OCI_SED -e 's/.*\.\(.*\)\.1$/\1.1/'`
  elif test -f $PDO_OCI_LCS_BASE.9.0; then
            PDO_OCI_VERSION=9.0
    elif test -f $PDO_OCI_DIR/lib/libclntsh.$SHLIB_SUFFIX_NAME.11.2; then

PDO_OCI_VERSION=11.2
  else
    PDO_OCI_VERSION=11.2
  fi
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PDO_OCI_VERSION" >&5
$as_echo "$PDO_OCI_VERSION" >&6; }

    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for oci.h" >&5
$as_echo_n "checking for oci.h... " >&6; }
        OCISDKRPMINC=`echo "$PDO_OCI_LIB_DIR" | $PHP_PDO_OCI_SED -e 's!^\(.*\)/lib/oracle/\(.*\)/\('${PDO_OCI_CLIENT_DIR}'\)/lib/*$!\1/include/oracle/\2/\3!'`

        OCISDKMANINC=`echo "$PDO_OCI_LIB_DIR" | $PHP_PDO_OCI_SED -e 's!^\(.*\)/lib/*$!\1/include!'`

        OCISDKZIPINC=$PDO_OCI_LIB_DIR/sdk/include

    if test -f "$OCISDKRPMINC/oci.h" ; then

  if test "$OCISDKRPMINC" != "/usr/include"; then

  if test -z "$OCISDKRPMINC" || echo "$OCISDKRPMINC" | grep '^/' >/dev/null ; then
    ai_p=$OCISDKRPMINC
  else

    ep_dir=`echo $OCISDKRPMINC|$SED 's%/*[^/][^/]*/*$%%'`

    ep_realdir=`(cd "$ep_dir" && pwd)`
    ai_p="$ep_realdir"/`basename "$OCISDKRPMINC"`
  fi

  unique=`echo $ai_p|$SED 's/[^a-zA-Z0-9]/_/g'`

  cmd="echo $ac_n \"\$INCLUDEPATH$unique$ac_c\""
  if test -n "$unique" && test "`eval $cmd`" = "" ; then
    eval "INCLUDEPATH$unique=set"

      if test ""; then
        INCLUDES="-I$ai_p $INCLUDES"
      else
        INCLUDES="$INCLUDES -I$ai_p"
      fi

  fi

  fi

      { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OCISDKRPMINC" >&5
$as_echo "$OCISDKRPMINC" >&6; }
    elif test -f "$OCISDKMANINC/oci.h" ; then

  if test "$OCISDKMANINC" != "/usr/include"; then

  if test -z "$OCISDKMANINC" || echo "$OCISDKMANINC" | grep '^/' >/dev/null ; then
    ai_p=$OCISDKMANINC
  else

    ep_dir=`echo $OCISDKMANINC|$SED 's%/*[^/][^/]*/*$%%'`

    ep_realdir=`(cd "$ep_dir" && pwd)`
    ai_p="$ep_realdir"/`basename "$OCISDKMANINC"`
  fi

  unique=`echo $ai_p|$SED 's/[^a-zA-Z0-9]/_/g'`

  cmd="echo $ac_n \"\$INCLUDEPATH$unique$ac_c\""
  if test -n "$unique" && test "`eval $cmd`" = "" ; then
    eval "INCLUDEPATH$unique=set"

      if test ""; then
        INCLUDES="-I$ai_p $INCLUDES"
      else
        INCLUDES="$INCLUDES -I$ai_p"
      fi

  fi

  fi

      { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OCISDKMANINC" >&5
$as_echo "$OCISDKMANINC" >&6; }
    elif test -f "$OCISDKZIPINC/oci.h" ; then

  if test "$OCISDKZIPINC" != "/usr/include"; then

  if test -z "$OCISDKZIPINC" || echo "$OCISDKZIPINC" | grep '^/' >/dev/null ; then
    ai_p=$OCISDKZIPINC
  else

    ep_dir=`echo $OCISDKZIPINC|$SED 's%/*[^/][^/]*/*$%%'`

    ep_realdir=`(cd "$ep_dir" && pwd)`
    ai_p="$ep_realdir"/`basename "$OCISDKZIPINC"`
  fi

  unique=`echo $ai_p|$SED 's/[^a-zA-Z0-9]/_/g'`

  cmd="echo $ac_n \"\$INCLUDEPATH$unique$ac_c\""
  if test -n "$unique" && test "`eval $cmd`" = "" ; then
    eval "INCLUDEPATH$unique=set"

      if test ""; then
        INCLUDES="-I$ai_p $INCLUDES"
      else
        INCLUDES="$INCLUDES -I$ai_p"
      fi

  fi

  fi

      { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OCISDKZIPINC" >&5
$as_echo "$OCISDKZIPINC" >&6; }
    else
      as_fn_error $? "I'm too dumb to figure out where the include dir is in your Instant Client install" "$LINENO" 5
    fi
  else

  # The cast to long int works around a bug in the HP C Compiler
# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
# This bug is HP SR number 8606223364.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long" >&5
$as_echo_n "checking size of long... " >&6; }
if ${ac_cv_sizeof_long+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (long))" "ac_cv_sizeof_long"        "$ac_includes_default"; then :

else
  if test "$ac_cv_type_long" = yes; then
     { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error 77 "cannot compute sizeof (long)
See \`config.log' for more details" "$LINENO" 5; }
   else
     ac_cv_sizeof_long=0
   fi
fi

fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_long" >&5
$as_echo "$ac_cv_sizeof_long" >&6; }

cat >>confdefs.h <<_ACEOF
#define SIZEOF_LONG $ac_cv_sizeof_long
_ACEOF

  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we're at 64-bit platform" >&5
$as_echo_n "checking if we're at 64-bit platform... " >&6; }
  if test "$ac_cv_sizeof_long" -eq 4; then :

    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
    TMP_PDO_OCI_LIB_DIR="$PDO_OCI_DIR/lib32"

else

    { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
    TMP_PDO_OCI_LIB_DIR="$PDO_OCI_DIR/lib"

fi

  { $as_echo "$as_me:${as_lineno-$LINENO}: checking OCI8 libraries dir" >&5
$as_echo_n "checking OCI8 libraries dir... " >&6; }
  if test -d "$PDO_OCI_DIR/lib" && test ! -d "$PDO_OCI_DIR/lib32"; then
    PDO_OCI_LIB_DIR="$PDO_OCI_DIR/lib"
  elif test ! -d "$PDO_OCI_DIR/lib" && test -d "$PDO_OCI_DIR/lib32"; then
    PDO_OCI_LIB_DIR="$PDO_OCI_DIR/lib32"
  elif test -d "$PDO_OCI_DIR/lib" && test -d "$PDO_OCI_DIR/lib32"; then
    PDO_OCI_LIB_DIR=$TMP_PDO_OCI_LIB_DIR
  else
    as_fn_error $? "Oracle required OCI8 libraries not found" "$LINENO" 5
  fi
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PDO_OCI_LIB_DIR" >&5
$as_echo "$PDO_OCI_LIB_DIR" >&6; }

    if test -d "$PDO_OCI_DIR/rdbms/public"; then

  if test "$PDO_OCI_DIR/rdbms/public" != "/usr/include"; then

  if test -z "$PDO_OCI_DIR/rdbms/public" || echo "$PDO_OCI_DIR/rdbms/public" | grep '^/' >/dev/null ; then
    ai_p=$PDO_OCI_DIR/rdbms/public
  else

    ep_dir=`echo $PDO_OCI_DIR/rdbms/public|$SED 's%/*[^/][^/]*/*$%%'`

    ep_realdir=`(cd "$ep_dir" && pwd)`
    ai_p="$ep_realdir"/`basename "$PDO_OCI_DIR/rdbms/public"`
  fi

  unique=`echo $ai_p|$SED 's/[^a-zA-Z0-9]/_/g'`

  cmd="echo $ac_n \"\$INCLUDEPATH$unique$ac_c\""
  if test -n "$unique" && test "`eval $cmd`" = "" ; then
    eval "INCLUDEPATH$unique=set"

      if test ""; then
        INCLUDES="-I$ai_p $INCLUDES"
      else
        INCLUDES="$INCLUDES -I$ai_p"
      fi

  fi

  fi

      PDO_OCI_INCLUDES="$PDO_OCI_INCLUDES -I$PDO_OCI_DIR/rdbms/public"
    fi
    if test -d "$PDO_OCI_DIR/rdbms/demo"; then

  if test "$PDO_OCI_DIR/rdbms/demo" != "/usr/include"; then

  if test -z "$PDO_OCI_DIR/rdbms/demo" || echo "$PDO_OCI_DIR/rdbms/demo" | grep '^/' >/dev/null ; then
    ai_p=$PDO_OCI_DIR/rdbms/demo
  else

    ep_dir=`echo $PDO_OCI_DIR/rdbms/demo|$SED 's%/*[^/][^/]*/*$%%'`

    ep_realdir=`(cd "$ep_dir" && pwd)`
    ai_p="$ep_realdir"/`basename "$PDO_OCI_DIR/rdbms/demo"`
  fi

  unique=`echo $ai_p|$SED 's/[^a-zA-Z0-9]/_/g'`

  cmd="echo $ac_n \"\$INCLUDEPATH$unique$ac_c\""
  if test -n "$unique" && test "`eval $cmd`" = "" ; then
    eval "INCLUDEPATH$unique=set"

      if test ""; then
        INCLUDES="-I$ai_p $INCLUDES"
      else
        INCLUDES="$INCLUDES -I$ai_p"
      fi

  fi

  fi

      PDO_OCI_INCLUDES="$PDO_OCI_INCLUDES -I$PDO_OCI_DIR/rdbms/demo"
    fi
    if test -d "$PDO_OCI_DIR/network/public"; then

  if test "$PDO_OCI_DIR/network/public" != "/usr/include"; then

  if test -z "$PDO_OCI_DIR/network/public" || echo "$PDO_OCI_DIR/network/public" | grep '^/' >/dev/null ; then
    ai_p=$PDO_OCI_DIR/network/public
  else

    ep_dir=`echo $PDO_OCI_DIR/network/public|$SED 's%/*[^/][^/]*/*$%%'`

    ep_realdir=`(cd "$ep_dir" && pwd)`
    ai_p="$ep_realdir"/`basename "$PDO_OCI_DIR/network/public"`
  fi

  unique=`echo $ai_p|$SED 's/[^a-zA-Z0-9]/_/g'`

  cmd="echo $ac_n \"\$INCLUDEPATH$unique$ac_c\""
  if test -n "$unique" && test "`eval $cmd`" = "" ; then
    eval "INCLUDEPATH$unique=set"

      if test ""; then
        INCLUDES="-I$ai_p $INCLUDES"
      else
        INCLUDES="$INCLUDES -I$ai_p"
      fi

  fi

  fi

      PDO_OCI_INCLUDES="$PDO_OCI_INCLUDES -I$PDO_OCI_DIR/network/public"
    fi
    if test -d "$PDO_OCI_DIR/plsql/public"; then

  if test "$PDO_OCI_DIR/plsql/public" != "/usr/include"; then

  if test -z "$PDO_OCI_DIR/plsql/public" || echo "$PDO_OCI_DIR/plsql/public" | grep '^/' >/dev/null ; then
    ai_p=$PDO_OCI_DIR/plsql/public
  else

    ep_dir=`echo $PDO_OCI_DIR/plsql/public|$SED 's%/*[^/][^/]*/*$%%'`

    ep_realdir=`(cd "$ep_dir" && pwd)`
    ai_p="$ep_realdir"/`basename "$PDO_OCI_DIR/plsql/public"`
  fi

  unique=`echo $ai_p|$SED 's/[^a-zA-Z0-9]/_/g'`

  cmd="echo $ac_n \"\$INCLUDEPATH$unique$ac_c\""
  if test -n "$unique" && test "`eval $cmd`" = "" ; then
    eval "INCLUDEPATH$unique=set"

      if test ""; then
        INCLUDES="-I$ai_p $INCLUDES"
      else
        INCLUDES="$INCLUDES -I$ai_p"
      fi

  fi

  fi

      PDO_OCI_INCLUDES="$PDO_OCI_INCLUDES -I$PDO_OCI_DIR/plsql/public"
    fi
    if test -d "$PDO_OCI_DIR/include"; then

  if test "$PDO_OCI_DIR/include" != "/usr/include"; then

  if test -z "$PDO_OCI_DIR/include" || echo "$PDO_OCI_DIR/include" | grep '^/' >/dev/null ; then
    ai_p=$PDO_OCI_DIR/include
  else

    ep_dir=`echo $PDO_OCI_DIR/include|$SED 's%/*[^/][^/]*/*$%%'`

    ep_realdir=`(cd "$ep_dir" && pwd)`
    ai_p="$ep_realdir"/`basename "$PDO_OCI_DIR/include"`
  fi

  unique=`echo $ai_p|$SED 's/[^a-zA-Z0-9]/_/g'`

  cmd="echo $ac_n \"\$INCLUDEPATH$unique$ac_c\""
  if test -n "$unique" && test "`eval $cmd`" = "" ; then
    eval "INCLUDEPATH$unique=set"

      if test ""; then
        INCLUDES="-I$ai_p $INCLUDES"
      else
        INCLUDES="$INCLUDES -I$ai_p"
      fi

  fi

  fi

      PDO_OCI_INCLUDES="$PDO_OCI_INCLUDES -I$PDO_OCI_DIR/include"
    fi

    if test -f "$PDO_OCI_LIB_DIR/sysliblist"; then

  for ac_i in `cat $PDO_OCI_LIB_DIR/sysliblist`; do
    case $ac_i in
    -pthread)
      if test "$ext_shared" = "yes"; then
        PDO_OCI_SYSLIB="$PDO_OCI_SYSLIB -pthread"
      else

  unique=`echo $ac_i|$SED 's/[^a-zA-Z0-9]/_/g'`

  cmd="echo $ac_n \"\$EXTRA_LDFLAGS$unique$ac_c\""
  if test -n "$unique" && test "`eval $cmd`" = "" ; then
    eval "EXTRA_LDFLAGS$unique=set"
    EXTRA_LDFLAGS="$EXTRA_LDFLAGS $ac_i"
  fi

  unique=`echo $ac_i|$SED 's/[^a-zA-Z0-9]/_/g'`

  cmd="echo $ac_n \"\$EXTRA_LDFLAGS_PROGRAM$unique$ac_c\""
  if test -n "$unique" && test "`eval $cmd`" = "" ; then
    eval "EXTRA_LDFLAGS_PROGRAM$unique=set"
    EXTRA_LDFLAGS_PROGRAM="$EXTRA_LDFLAGS_PROGRAM $ac_i"
  fi

      fi
    ;;
    -l*)
      ac_ii=`echo $ac_i|cut -c 3-`

  case $ac_ii in
  c|c_r) ;;
  *)
    if test "$ext_shared" = "yes"; then
        PDO_OCI_SYSLIB="$PDO_OCI_SYSLIB -l$ac_ii"
    else

  case $ac_ii in
  c|c_r) ;;
  *)
      LIBS="$LIBS -l$ac_ii"
   ;;
  esac

    fi
   ;;
  esac

    ;;
    -L*)
      ac_ii=`echo $ac_i|cut -c 3-`

  if test "$ac_ii" != "/usr/$PHP_LIBDIR" && test "$ac_ii" != "/usr/lib"; then

  if test -z "$ac_ii" || echo "$ac_ii" | grep '^/' >/dev/null ; then
    ai_p=$ac_ii
  else

    ep_dir=`echo $ac_ii|$SED 's%/*[^/][^/]*/*$%%'`

    ep_realdir=`(cd "$ep_dir" && pwd)`
    ai_p="$ep_realdir"/`basename "$ac_ii"`
  fi

      if test "$ext_shared" = "yes"; then
        PDO_OCI_SYSLIB="-L$ai_p $PDO_OCI_SYSLIB"
        test -n "$ld_runpath_switch" && PDO_OCI_SYSLIB="$ld_runpath_switch$ai_p $PDO_OCI_SYSLIB"
      else

  unique=`echo $ai_p|$SED 's/[^a-zA-Z0-9]/_/g'`

  cmd="echo $ac_n \"\$LIBPATH$unique$ac_c\""
  if test -n "$unique" && test "`eval $cmd`" = "" ; then
    eval "LIBPATH$unique=set"

    test -n "$ld_runpath_switch" && LDFLAGS="$LDFLAGS $ld_runpath_switch$ai_p"
    LDFLAGS="$LDFLAGS -L$ai_p"
    PHP_RPATHS="$PHP_RPATHS $ai_p"

  fi

      fi

  fi

    ;;
    esac
  done

    elif test -f "$PDO_OCI_DIR/rdbms/lib/sysliblist"; then

  for ac_i in `cat $PDO_OCI_DIR/rdbms/lib/sysliblist`; do
    case $ac_i in
    -pthread)
      if test "$ext_shared" = "yes"; then
        PDO_OCI_SYSLIB="$PDO_OCI_SYSLIB -pthread"
      else

  unique=`echo $ac_i|$SED 's/[^a-zA-Z0-9]/_/g'`

  cmd="echo $ac_n \"\$EXTRA_LDFLAGS$unique$ac_c\""
  if test -n "$unique" && test "`eval $cmd`" = "" ; then
    eval "EXTRA_LDFLAGS$unique=set"
    EXTRA_LDFLAGS="$EXTRA_LDFLAGS $ac_i"
  fi

  unique=`echo $ac_i|$SED 's/[^a-zA-Z0-9]/_/g'`

  cmd="echo $ac_n \"\$EXTRA_LDFLAGS_PROGRAM$unique$ac_c\""
  if test -n "$unique" && test "`eval $cmd`" = "" ; then
    eval "EXTRA_LDFLAGS_PROGRAM$unique=set"
    EXTRA_LDFLAGS_PROGRAM="$EXTRA_LDFLAGS_PROGRAM $ac_i"
  fi

      fi
    ;;
    -l*)
      ac_ii=`echo $ac_i|cut -c 3-`

  case $ac_ii in
  c|c_r) ;;
  *)
    if test "$ext_shared" = "yes"; then
        PDO_OCI_SYSLIB="$PDO_OCI_SYSLIB -l$ac_ii"
    else

  case $ac_ii in
  c|c_r) ;;
  *)
      LIBS="$LIBS -l$ac_ii"
   ;;
  esac

    fi
   ;;
  esac

    ;;
    -L*)
      ac_ii=`echo $ac_i|cut -c 3-`

  if test "$ac_ii" != "/usr/$PHP_LIBDIR" && test "$ac_ii" != "/usr/lib"; then

  if test -z "$ac_ii" || echo "$ac_ii" | grep '^/' >/dev/null ; then
    ai_p=$ac_ii
  else

    ep_dir=`echo $ac_ii|$SED 's%/*[^/][^/]*/*$%%'`

    ep_realdir=`(cd "$ep_dir" && pwd)`
    ai_p="$ep_realdir"/`basename "$ac_ii"`
  fi

      if test "$ext_shared" = "yes"; then
        PDO_OCI_SYSLIB="-L$ai_p $PDO_OCI_SYSLIB"
        test -n "$ld_runpath_switch" && PDO_OCI_SYSLIB="$ld_runpath_switch$ai_p $PDO_OCI_SYSLIB"
      else

  unique=`echo $ai_p|$SED 's/[^a-zA-Z0-9]/_/g'`

  cmd="echo $ac_n \"\$LIBPATH$unique$ac_c\""
  if test -n "$unique" && test "`eval $cmd`" = "" ; then
    eval "LIBPATH$unique=set"

    test -n "$ld_runpath_switch" && LDFLAGS="$LDFLAGS $ld_runpath_switch$ai_p"
    LDFLAGS="$LDFLAGS -L$ai_p"
    PHP_RPATHS="$PHP_RPATHS $ai_p"

  fi

      fi

  fi

    ;;
    esac
  done

    fi

  { $as_echo "$as_me:${as_lineno-$LINENO}: checking Oracle version" >&5
$as_echo_n "checking Oracle version... " >&6; }
  PDO_OCI_LCS_BASE=$PDO_OCI_LIB_DIR/libclntsh.$SHLIB_SUFFIX_NAME
    PDO_OCI_LCS=`ls $PDO_OCI_LCS_BASE.*.1 2> /dev/null | $PHP_PDO_OCI_TAIL1`
  if test -f "$PDO_OCI_LCS"; then
            PDO_OCI_VERSION=`echo $PDO_OCI_LCS | $PHP_PDO_OCI_SED -e 's/.*\.\(.*\)\.1$/\1.1/'`
  elif test -f $PDO_OCI_LCS_BASE.9.0; then
            PDO_OCI_VERSION=9.0
    elif test -f $PDO_OCI_DIR/lib/libclntsh.$SHLIB_SUFFIX_NAME.11.2; then

PDO_OCI_VERSION=11.2
  else
    as_fn_error $? "Oracle libclntsh.$SHLIB_SUFFIX_NAME client library not found or its version is lower than 9" "$LINENO" 5
  fi
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PDO_OCI_VERSION" >&5
$as_echo "$PDO_OCI_VERSION" >&6; }

  fi

  case $PDO_OCI_VERSION in
    7.3|8.0|8.1)
      as_fn_error $? "Oracle client libraries < 9 are not supported" "$LINENO" 5
      ;;
  esac

  case clntsh in
  c|c_r) ;;
  *)
    if test "$ext_shared" = "yes"; then
        PDO_OCI_SHARED_LIBADD="$PDO_OCI_SHARED_LIBADD -lclntsh"
    else

  case clntsh in
  c|c_r) ;;
  *)
      LIBS="$LIBS -lclntsh"
   ;;
  esac

    fi
   ;;
  esac

  if test "$PDO_OCI_LIB_DIR" != "/usr/$PHP_LIBDIR" && test "$PDO_OCI_LIB_DIR" != "/usr/lib"; then

  if test -z "$PDO_OCI_LIB_DIR" || echo "$PDO_OCI_LIB_DIR" | grep '^/' >/dev/null ; then
    ai_p=$PDO_OCI_LIB_DIR
  else

    ep_dir=`echo $PDO_OCI_LIB_DIR|$SED 's%/*[^/][^/]*/*$%%'`

    ep_realdir=`(cd "$ep_dir" && pwd)`
    ai_p="$ep_realdir"/`basename "$PDO_OCI_LIB_DIR"`
  fi

      if test "$ext_shared" = "yes"; then
        PDO_OCI_SHARED_LIBADD="-L$ai_p $PDO_OCI_SHARED_LIBADD"
        test -n "$ld_runpath_switch" && PDO_OCI_SHARED_LIBADD="$ld_runpath_switch$ai_p $PDO_OCI_SHARED_LIBADD"
      else

  unique=`echo $ai_p|$SED 's/[^a-zA-Z0-9]/_/g'`

  cmd="echo $ac_n \"\$LIBPATH$unique$ac_c\""
  if test -n "$unique" && test "`eval $cmd`" = "" ; then
    eval "LIBPATH$unique=set"

    test -n "$ld_runpath_switch" && LDFLAGS="$LDFLAGS $ld_runpath_switch$ai_p"
    LDFLAGS="$LDFLAGS -L$ai_p"
    PHP_RPATHS="$PHP_RPATHS $ai_p"

  fi

      fi

  fi

  save_old_LDFLAGS=$LDFLAGS
  ac_stuff="
    -L$PDO_OCI_LIB_DIR $PDO_OCI_SHARED_LIBADD
  "

  save_ext_shared=$ext_shared
  ext_shared=yes

  for ac_i in $ac_stuff; do
    case $ac_i in
    -pthread)
      if test "$ext_shared" = "yes"; then
        LDFLAGS="$LDFLAGS -pthread"
      else

  unique=`echo $ac_i|$SED 's/[^a-zA-Z0-9]/_/g'`

  cmd="echo $ac_n \"\$EXTRA_LDFLAGS$unique$ac_c\""
  if test -n "$unique" && test "`eval $cmd`" = "" ; then
    eval "EXTRA_LDFLAGS$unique=set"
    EXTRA_LDFLAGS="$EXTRA_LDFLAGS $ac_i"
  fi

  unique=`echo $ac_i|$SED 's/[^a-zA-Z0-9]/_/g'`

  cmd="echo $ac_n \"\$EXTRA_LDFLAGS_PROGRAM$unique$ac_c\""
  if test -n "$unique" && test "`eval $cmd`" = "" ; then
    eval "EXTRA_LDFLAGS_PROGRAM$unique=set"
    EXTRA_LDFLAGS_PROGRAM="$EXTRA_LDFLAGS_PROGRAM $ac_i"
  fi

      fi
    ;;
    -l*)
      ac_ii=`echo $ac_i|cut -c 3-`

  case $ac_ii in
  c|c_r) ;;
  *)
    if test "$ext_shared" = "yes"; then
        LDFLAGS="$LDFLAGS -l$ac_ii"
    else

  case $ac_ii in
  c|c_r) ;;
  *)
      LIBS="$LIBS -l$ac_ii"
   ;;
  esac

    fi
   ;;
  esac

    ;;
    -L*)
      ac_ii=`echo $ac_i|cut -c 3-`

  if test "$ac_ii" != "/usr/$PHP_LIBDIR" && test "$ac_ii" != "/usr/lib"; then

  if test -z "$ac_ii" || echo "$ac_ii" | grep '^/' >/dev/null ; then
    ai_p=$ac_ii
  else

    ep_dir=`echo $ac_ii|$SED 's%/*[^/][^/]*/*$%%'`

    ep_realdir=`(cd "$ep_dir" && pwd)`
    ai_p="$ep_realdir"/`basename "$ac_ii"`
  fi

      if test "$ext_shared" = "yes"; then
        LDFLAGS="-L$ai_p $LDFLAGS"
        test -n "$ld_runpath_switch" && LDFLAGS="$ld_runpath_switch$ai_p $LDFLAGS"
      else

  unique=`echo $ai_p|$SED 's/[^a-zA-Z0-9]/_/g'`

  cmd="echo $ac_n \"\$LIBPATH$unique$ac_c\""
  if test -n "$unique" && test "`eval $cmd`" = "" ; then
    eval "LIBPATH$unique=set"

    test -n "$ld_runpath_switch" && LDFLAGS="$LDFLAGS $ld_runpath_switch$ai_p"
    LDFLAGS="$LDFLAGS -L$ai_p"
    PHP_RPATHS="$PHP_RPATHS $ai_p"

  fi

      fi

  fi

    ;;
    esac
  done

  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for OCIEnvCreate in -lclntsh" >&5
$as_echo_n "checking for OCIEnvCreate in -lclntsh... " >&6; }
if ${ac_cv_lib_clntsh_OCIEnvCreate+:} false; then :
  $as_echo_n "(cached) " >&6
else
  ac_check_lib_save_LIBS=$LIBS
LIBS="-lclntsh  $LIBS"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */

/* Override any GCC internal prototype to avoid an error.
   Use char because int might match the return type of a GCC
   builtin and then its argument prototype would still apply.  */
#ifdef __cplusplus
extern "C"
#endif
char OCIEnvCreate ();
int
main ()
{
return OCIEnvCreate ();
  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
  ac_cv_lib_clntsh_OCIEnvCreate=yes
else
  ac_cv_lib_clntsh_OCIEnvCreate=no
fi
rm -f core conftest.err conftest.$ac_objext \
    conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_clntsh_OCIEnvCreate" >&5
$as_echo "$ac_cv_lib_clntsh_OCIEnvCreate" >&6; }
if test "x$ac_cv_lib_clntsh_OCIEnvCreate" = xyes; then :

    LDFLAGS=$save_old_LDFLAGS
    ext_shared=$save_ext_shared

$as_echo "#define HAVE_OCIENVCREATE 1" >>confdefs.h

else

    LDFLAGS=$save_old_LDFLAGS
    ext_shared=$save_ext_shared
    unset ac_cv_lib_clntsh_OCIEnvCreate

fi

  save_old_LDFLAGS=$LDFLAGS
  ac_stuff="
    -L$PDO_OCI_LIB_DIR $PDO_OCI_SHARED_LIBADD
  "

  save_ext_shared=$ext_shared
  ext_shared=yes

  for ac_i in $ac_stuff; do
    case $ac_i in
    -pthread)
      if test "$ext_shared" = "yes"; then
        LDFLAGS="$LDFLAGS -pthread"
      else

  unique=`echo $ac_i|$SED 's/[^a-zA-Z0-9]/_/g'`

  cmd="echo $ac_n \"\$EXTRA_LDFLAGS$unique$ac_c\""
  if test -n "$unique" && test "`eval $cmd`" = "" ; then
    eval "EXTRA_LDFLAGS$unique=set"
    EXTRA_LDFLAGS="$EXTRA_LDFLAGS $ac_i"
  fi

  unique=`echo $ac_i|$SED 's/[^a-zA-Z0-9]/_/g'`

  cmd="echo $ac_n \"\$EXTRA_LDFLAGS_PROGRAM$unique$ac_c\""
  if test -n "$unique" && test "`eval $cmd`" = "" ; then
    eval "EXTRA_LDFLAGS_PROGRAM$unique=set"
    EXTRA_LDFLAGS_PROGRAM="$EXTRA_LDFLAGS_PROGRAM $ac_i"
  fi

      fi
    ;;
    -l*)
      ac_ii=`echo $ac_i|cut -c 3-`

  case $ac_ii in
  c|c_r) ;;
  *)
    if test "$ext_shared" = "yes"; then
        LDFLAGS="$LDFLAGS -l$ac_ii"
    else

  case $ac_ii in
  c|c_r) ;;
  *)
      LIBS="$LIBS -l$ac_ii"
   ;;
  esac

    fi
   ;;
  esac

    ;;
    -L*)
      ac_ii=`echo $ac_i|cut -c 3-`

  if test "$ac_ii" != "/usr/$PHP_LIBDIR" && test "$ac_ii" != "/usr/lib"; then

  if test -z "$ac_ii" || echo "$ac_ii" | grep '^/' >/dev/null ; then
    ai_p=$ac_ii
  else

    ep_dir=`echo $ac_ii|$SED 's%/*[^/][^/]*/*$%%'`

    ep_realdir=`(cd "$ep_dir" && pwd)`
    ai_p="$ep_realdir"/`basename "$ac_ii"`
  fi

      if test "$ext_shared" = "yes"; then
        LDFLAGS="-L$ai_p $LDFLAGS"
        test -n "$ld_runpath_switch" && LDFLAGS="$ld_runpath_switch$ai_p $LDFLAGS"
      else

  unique=`echo $ai_p|$SED 's/[^a-zA-Z0-9]/_/g'`

  cmd="echo $ac_n \"\$LIBPATH$unique$ac_c\""
  if test -n "$unique" && test "`eval $cmd`" = "" ; then
    eval "LIBPATH$unique=set"

    test -n "$ld_runpath_switch" && LDFLAGS="$LDFLAGS $ld_runpath_switch$ai_p"
    LDFLAGS="$LDFLAGS -L$ai_p"
    PHP_RPATHS="$PHP_RPATHS $ai_p"

  fi

      fi

  fi

    ;;
    esac
  done

  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for OCIEnvNlsCreate in -lclntsh" >&5
$as_echo_n "checking for OCIEnvNlsCreate in -lclntsh... " >&6; }
if ${ac_cv_lib_clntsh_OCIEnvNlsCreate+:} false; then :
  $as_echo_n "(cached) " >&6
else
  ac_check_lib_save_LIBS=$LIBS
LIBS="-lclntsh  $LIBS"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */

/* Override any GCC internal prototype to avoid an error.
   Use char because int might match the return type of a GCC
   builtin and then its argument prototype would still apply.  */
#ifdef __cplusplus
extern "C"
#endif
char OCIEnvNlsCreate ();
int
main ()
{
return OCIEnvNlsCreate ();
  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
  ac_cv_lib_clntsh_OCIEnvNlsCreate=yes
else
  ac_cv_lib_clntsh_OCIEnvNlsCreate=no
fi
rm -f core conftest.err conftest.$ac_objext \
    conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_clntsh_OCIEnvNlsCreate" >&5
$as_echo "$ac_cv_lib_clntsh_OCIEnvNlsCreate" >&6; }
if test "x$ac_cv_lib_clntsh_OCIEnvNlsCreate" = xyes; then :

    LDFLAGS=$save_old_LDFLAGS
    ext_shared=$save_ext_shared

$as_echo "#define HAVE_OCIENVNLSCREATE 1" >>confdefs.h

else

    LDFLAGS=$save_old_LDFLAGS
    ext_shared=$save_ext_shared
    unset ac_cv_lib_clntsh_OCIEnvNlsCreate

fi

  save_old_LDFLAGS=$LDFLAGS
  ac_stuff="
    -L$PDO_OCI_LIB_DIR $PDO_OCI_SHARED_LIBADD
  "

  save_ext_shared=$ext_shared
  ext_shared=yes

  for ac_i in $ac_stuff; do
    case $ac_i in
    -pthread)
      if test "$ext_shared" = "yes"; then
        LDFLAGS="$LDFLAGS -pthread"
      else

  unique=`echo $ac_i|$SED 's/[^a-zA-Z0-9]/_/g'`

  cmd="echo $ac_n \"\$EXTRA_LDFLAGS$unique$ac_c\""
  if test -n "$unique" && test "`eval $cmd`" = "" ; then
    eval "EXTRA_LDFLAGS$unique=set"
    EXTRA_LDFLAGS="$EXTRA_LDFLAGS $ac_i"
  fi

  unique=`echo $ac_i|$SED 's/[^a-zA-Z0-9]/_/g'`

  cmd="echo $ac_n \"\$EXTRA_LDFLAGS_PROGRAM$unique$ac_c\""
  if test -n "$unique" && test "`eval $cmd`" = "" ; then
    eval "EXTRA_LDFLAGS_PROGRAM$unique=set"
    EXTRA_LDFLAGS_PROGRAM="$EXTRA_LDFLAGS_PROGRAM $ac_i"
  fi

      fi
    ;;
    -l*)
      ac_ii=`echo $ac_i|cut -c 3-`

  case $ac_ii in
  c|c_r) ;;
  *)
    if test "$ext_shared" = "yes"; then
        LDFLAGS="$LDFLAGS -l$ac_ii"
    else

  case $ac_ii in
  c|c_r) ;;
  *)
      LIBS="$LIBS -l$ac_ii"
   ;;
  esac

    fi
   ;;
  esac

    ;;
    -L*)
      ac_ii=`echo $ac_i|cut -c 3-`

  if test "$ac_ii" != "/usr/$PHP_LIBDIR" && test "$ac_ii" != "/usr/lib"; then

  if test -z "$ac_ii" || echo "$ac_ii" | grep '^/' >/dev/null ; then
    ai_p=$ac_ii
  else

    ep_dir=`echo $ac_ii|$SED 's%/*[^/][^/]*/*$%%'`

    ep_realdir=`(cd "$ep_dir" && pwd)`
    ai_p="$ep_realdir"/`basename "$ac_ii"`
  fi

      if test "$ext_shared" = "yes"; then
        LDFLAGS="-L$ai_p $LDFLAGS"
        test -n "$ld_runpath_switch" && LDFLAGS="$ld_runpath_switch$ai_p $LDFLAGS"
      else

  unique=`echo $ai_p|$SED 's/[^a-zA-Z0-9]/_/g'`

  cmd="echo $ac_n \"\$LIBPATH$unique$ac_c\""
  if test -n "$unique" && test "`eval $cmd`" = "" ; then
    eval "LIBPATH$unique=set"

    test -n "$ld_runpath_switch" && LDFLAGS="$LDFLAGS $ld_runpath_switch$ai_p"
    LDFLAGS="$LDFLAGS -L$ai_p"
    PHP_RPATHS="$PHP_RPATHS $ai_p"

  fi

      fi

  fi

    ;;
    esac
  done

  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for OCIStmtFetch2 in -lclntsh" >&5
$as_echo_n "checking for OCIStmtFetch2 in -lclntsh... " >&6; }
if ${ac_cv_lib_clntsh_OCIStmtFetch2+:} false; then :
  $as_echo_n "(cached) " >&6
else
  ac_check_lib_save_LIBS=$LIBS
LIBS="-lclntsh  $LIBS"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */

/* Override any GCC internal prototype to avoid an error.
   Use char because int might match the return type of a GCC
   builtin and then its argument prototype would still apply.  */
#ifdef __cplusplus
extern "C"
#endif
char OCIStmtFetch2 ();
int
main ()
{
return OCIStmtFetch2 ();
  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
  ac_cv_lib_clntsh_OCIStmtFetch2=yes
else
  ac_cv_lib_clntsh_OCIStmtFetch2=no
fi
rm -f core conftest.err conftest.$ac_objext \
    conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_clntsh_OCIStmtFetch2" >&5
$as_echo "$ac_cv_lib_clntsh_OCIStmtFetch2" >&6; }
if test "x$ac_cv_lib_clntsh_OCIStmtFetch2" = xyes; then :

    LDFLAGS=$save_old_LDFLAGS
    ext_shared=$save_ext_shared

$as_echo "#define HAVE_OCISTMTFETCH2 1" >>confdefs.h

else

    LDFLAGS=$save_old_LDFLAGS
    ext_shared=$save_ext_shared
    unset ac_cv_lib_clntsh_OCIStmtFetch2

fi

  save_old_LDFLAGS=$LDFLAGS
  ac_stuff="
     -L$PDO_OCI_LIB_DIR $PDO_OCI_SHARED_LIBADD
  "

  save_ext_shared=$ext_shared
  ext_shared=yes

  for ac_i in $ac_stuff; do
    case $ac_i in
    -pthread)
      if test "$ext_shared" = "yes"; then
        LDFLAGS="$LDFLAGS -pthread"
      else

  unique=`echo $ac_i|$SED 's/[^a-zA-Z0-9]/_/g'`

  cmd="echo $ac_n \"\$EXTRA_LDFLAGS$unique$ac_c\""
  if test -n "$unique" && test "`eval $cmd`" = "" ; then
    eval "EXTRA_LDFLAGS$unique=set"
    EXTRA_LDFLAGS="$EXTRA_LDFLAGS $ac_i"
  fi

  unique=`echo $ac_i|$SED 's/[^a-zA-Z0-9]/_/g'`

  cmd="echo $ac_n \"\$EXTRA_LDFLAGS_PROGRAM$unique$ac_c\""
  if test -n "$unique" && test "`eval $cmd`" = "" ; then
    eval "EXTRA_LDFLAGS_PROGRAM$unique=set"
    EXTRA_LDFLAGS_PROGRAM="$EXTRA_LDFLAGS_PROGRAM $ac_i"
  fi

      fi
    ;;
    -l*)
      ac_ii=`echo $ac_i|cut -c 3-`

  case $ac_ii in
  c|c_r) ;;
  *)
    if test "$ext_shared" = "yes"; then
        LDFLAGS="$LDFLAGS -l$ac_ii"
    else

  case $ac_ii in
  c|c_r) ;;
  *)
      LIBS="$LIBS -l$ac_ii"
   ;;
  esac

    fi
   ;;
  esac

    ;;
    -L*)
      ac_ii=`echo $ac_i|cut -c 3-`

  if test "$ac_ii" != "/usr/$PHP_LIBDIR" && test "$ac_ii" != "/usr/lib"; then

  if test -z "$ac_ii" || echo "$ac_ii" | grep '^/' >/dev/null ; then
    ai_p=$ac_ii
  else

    ep_dir=`echo $ac_ii|$SED 's%/*[^/][^/]*/*$%%'`

    ep_realdir=`(cd "$ep_dir" && pwd)`
    ai_p="$ep_realdir"/`basename "$ac_ii"`
  fi

      if test "$ext_shared" = "yes"; then
        LDFLAGS="-L$ai_p $LDFLAGS"
        test -n "$ld_runpath_switch" && LDFLAGS="$ld_runpath_switch$ai_p $LDFLAGS"
      else

  unique=`echo $ai_p|$SED 's/[^a-zA-Z0-9]/_/g'`

  cmd="echo $ac_n \"\$LIBPATH$unique$ac_c\""
  if test -n "$unique" && test "`eval $cmd`" = "" ; then
    eval "LIBPATH$unique=set"

    test -n "$ld_runpath_switch" && LDFLAGS="$LDFLAGS $ld_runpath_switch$ai_p"
    LDFLAGS="$LDFLAGS -L$ai_p"
    PHP_RPATHS="$PHP_RPATHS $ai_p"

  fi

      fi

  fi

    ;;
    esac
  done

  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for OCILobRead2 in -lclntsh" >&5
$as_echo_n "checking for OCILobRead2 in -lclntsh... " >&6; }
if ${ac_cv_lib_clntsh_OCILobRead2+:} false; then :
  $as_echo_n "(cached) " >&6
else
  ac_check_lib_save_LIBS=$LIBS
LIBS="-lclntsh  $LIBS"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */

/* Override any GCC internal prototype to avoid an error.
   Use char because int might match the return type of a GCC
   builtin and then its argument prototype would still apply.  */
#ifdef __cplusplus
extern "C"
#endif
char OCILobRead2 ();
int
main ()
{
return OCILobRead2 ();
  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
  ac_cv_lib_clntsh_OCILobRead2=yes
else
  ac_cv_lib_clntsh_OCILobRead2=no
fi
rm -f core conftest.err conftest.$ac_objext \
    conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_clntsh_OCILobRead2" >&5
$as_echo "$ac_cv_lib_clntsh_OCILobRead2" >&6; }
if test "x$ac_cv_lib_clntsh_OCILobRead2" = xyes; then :

    LDFLAGS=$save_old_LDFLAGS
    ext_shared=$save_ext_shared

$as_echo "#define HAVE_OCILOBREAD2 1" >>confdefs.h

else

    LDFLAGS=$save_old_LDFLAGS
    ext_shared=$save_ext_shared
    unset ac_cv_lib_clntsh_OCILobRead2

fi

  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PDO includes" >&5
$as_echo_n "checking for PDO includes... " >&6; }
if ${pdo_cv_inc_path+:} false; then :
  $as_echo_n "(cached) " >&6
else

    if test -f $abs_srcdir/include/php/ext/pdo/php_pdo_driver.h; then
      pdo_cv_inc_path=$abs_srcdir/ext
    elif test -f $abs_srcdir/ext/pdo/php_pdo_driver.h; then
      pdo_cv_inc_path=$abs_srcdir/ext
    elif test -f $phpincludedir/ext/pdo/php_pdo_driver.h; then
      pdo_cv_inc_path=$phpincludedir/ext
    fi

fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $pdo_cv_inc_path" >&5
$as_echo "$pdo_cv_inc_path" >&6; }
  if test -n "$pdo_cv_inc_path"; then
:
  else
as_fn_error $? "Cannot find php_pdo_driver.h." "$LINENO" 5
  fi

  ext_builddir=.
  ext_srcdir=$abs_srcdir
  ext_dir=""

  ac_extra=`echo "-I$pdo_cv_inc_path"|$SED s#@ext_srcdir@#$ext_srcdir#g|$SED s#@ext_builddir@#$ext_builddir#g`

  if test "$ext_shared" != "shared" && test "$ext_shared" != "yes" && test "" != "cli"; then
    PHP_PDO_OCI_SHARED=no

  case $ext_dir in
  "") ac_srcdir="$abs_srcdir/"; unset ac_bdir; ac_inc="-I. -I$abs_srcdir" ;;
  /*) ac_srcdir=`echo "$ext_dir"|cut -c 2-`"/"; ac_bdir=$ac_srcdir; ac_inc="-I$ac_bdir -I$abs_srcdir/$ac_bdir" ;;
  *) ac_srcdir="$abs_srcdir/$ext_dir/"; ac_bdir="$ext_dir/"; ac_inc="-I$ac_bdir -I$ac_srcdir" ;;
  esac

  b_c_pre=$php_c_pre
  b_cxx_pre=$php_cxx_pre
  b_c_meta=$php_c_meta
  b_cxx_meta=$php_cxx_meta
  b_c_post=$php_c_post
  b_cxx_post=$php_cxx_post
  b_lo=$php_lo

  old_IFS=$IFS
  for ac_src in pdo_oci.c oci_driver.c oci_statement.c; do

      IFS=.
      set $ac_src
      ac_obj=$1
      IFS=$old_IFS

      PHP_GLOBAL_OBJS="$PHP_GLOBAL_OBJS $ac_bdir$ac_obj.lo"

      case $ac_src in
        *.c) ac_comp="$b_c_pre $ac_inc $b_c_meta $ac_extra -c $ac_srcdir$ac_src -o $ac_bdir$ac_obj.$b_lo $b_c_post" ;;
        *.s) ac_comp="$b_c_pre $ac_inc $b_c_meta $ac_extra -c $ac_srcdir$ac_src -o $ac_bdir$ac_obj.$b_lo $b_c_post" ;;
        *.S) ac_comp="$b_c_pre $ac_inc $b_c_meta $ac_extra -c $ac_srcdir$ac_src -o $ac_bdir$ac_obj.$b_lo $b_c_post" ;;
        *.cpp|*.cc|*.cxx) ac_comp="$b_cxx_pre $ac_inc $b_cxx_meta $ac_extra -c $ac_srcdir$ac_src -o $ac_bdir$ac_obj.$b_lo $b_cxx_post" ;;
      esac

      ac_comp="$ac_comp -MMD -MF $ac_bdir$ac_obj.dep -MT $ac_bdir$ac_obj.lo"

    cat >>Makefile.objects<<EOF
-include $ac_bdir$ac_obj.dep
$ac_bdir$ac_obj.lo: $ac_srcdir$ac_src
    $ac_comp
EOF
  done

    EXT_STATIC="$EXT_STATIC pdo_oci;$ext_dir"
    if test "$ext_shared" != "nocli"; then
      EXT_CLI_STATIC="$EXT_CLI_STATIC pdo_oci;$ext_dir"
    fi
  else
    if test "$ext_shared" = "shared" || test "$ext_shared" = "yes"; then
      PHP_PDO_OCI_SHARED=yes

  case $ext_dir in
  "") ac_srcdir="$abs_srcdir/"; unset ac_bdir; ac_inc="-I. -I$abs_srcdir" ;;
  /*) ac_srcdir=`echo "$ext_dir"|cut -c 2-`"/"; ac_bdir=$ac_srcdir; ac_inc="-I$ac_bdir -I$abs_srcdir/$ac_bdir" ;;
  *) ac_srcdir="$abs_srcdir/$ext_dir/"; ac_bdir="$ext_dir/"; ac_inc="-I$ac_bdir -I$ac_srcdir" ;;
  esac

  b_c_pre=$shared_c_pre
  b_cxx_pre=$shared_cxx_pre
  b_c_meta=$shared_c_meta
  b_cxx_meta=$shared_cxx_meta
  b_c_post=$shared_c_post
  b_cxx_post=$shared_cxx_post
  b_lo=$shared_lo

  old_IFS=$IFS
  for ac_src in pdo_oci.c oci_driver.c oci_statement.c; do

      IFS=.
      set $ac_src
      ac_obj=$1
      IFS=$old_IFS

      shared_objects_pdo_oci="$shared_objects_pdo_oci $ac_bdir$ac_obj.lo"

      case $ac_src in
        *.c) ac_comp="$b_c_pre $ac_inc $b_c_meta $ac_extra -DZEND_COMPILE_DL_EXT=1 -c $ac_srcdir$ac_src -o $ac_bdir$ac_obj.$b_lo $b_c_post" ;;
        *.s) ac_comp="$b_c_pre $ac_inc $b_c_meta $ac_extra -DZEND_COMPILE_DL_EXT=1 -c $ac_srcdir$ac_src -o $ac_bdir$ac_obj.$b_lo $b_c_post" ;;
        *.S) ac_comp="$b_c_pre $ac_inc $b_c_meta $ac_extra -DZEND_COMPILE_DL_EXT=1 -c $ac_srcdir$ac_src -o $ac_bdir$ac_obj.$b_lo $b_c_post" ;;
        *.cpp|*.cc|*.cxx) ac_comp="$b_cxx_pre $ac_inc $b_cxx_meta $ac_extra -DZEND_COMPILE_DL_EXT=1 -c $ac_srcdir$ac_src -o $ac_bdir$ac_obj.$b_lo $b_cxx_post" ;;
      esac

      ac_comp="$ac_comp -MMD -MF $ac_bdir$ac_obj.dep -MT $ac_bdir$ac_obj.lo"

    cat >>Makefile.objects<<EOF
-include $ac_bdir$ac_obj.dep
$ac_bdir$ac_obj.lo: $ac_srcdir$ac_src
    $ac_comp
EOF
  done

  install_modules="install-modules"
  suffix=la

  case $host_alias in
    *aix*)
      additional_flags="-Wl,-G"
      ;;
  esac

  if test "x" = "xyes"; then
    PHP_ZEND_EX="$PHP_ZEND_EX \$(phplibdir)/pdo_oci.$suffix"
  else
    PHP_MODULES="$PHP_MODULES \$(phplibdir)/pdo_oci.$suffix"
  fi

  PHP_VAR_SUBST="$PHP_VAR_SUBST shared_objects_pdo_oci"

  cat >>Makefile.objects<<EOF
\$(phplibdir)/pdo_oci.$suffix: $ext_builddir/pdo_oci.$suffix
    \$(LIBTOOL) --tag=CC --mode=install cp $ext_builddir/pdo_oci.$suffix \$(phplibdir)

$ext_builddir/pdo_oci.$suffix: \$(shared_objects_pdo_oci) \$(PDO_OCI_SHARED_DEPENDENCIES)
    \$(LIBTOOL) --tag=CC --mode=link \$(CC) -shared \$(COMMON_FLAGS) \$(CFLAGS_CLEAN) \$(EXTRA_CFLAGS) \$(LDFLAGS) $additional_flags -o \$@ -export-dynamic -avoid-version -prefer-pic -module -rpath \$(phplibdir) \$(EXTRA_LDFLAGS) \$(shared_objects_pdo_oci) \$(PDO_OCI_SHARED_LIBADD)

EOF

cat >>confdefs.h <<_ACEOF
#define COMPILE_DL_PDO_OCI 1
_ACEOF

    fi
  fi

  if test "$ext_shared" != "shared" && test "$ext_shared" != "yes" && test "" = "cli"; then
    PHP_PDO_OCI_SHARED=no
    case "$PHP_SAPI" in
      cgi|embed|phpdbg)

  case $ext_dir in
  "") ac_srcdir="$abs_srcdir/"; unset ac_bdir; ac_inc="-I. -I$abs_srcdir" ;;
  /*) ac_srcdir=`echo "$ext_dir"|cut -c 2-`"/"; ac_bdir=$ac_srcdir; ac_inc="-I$ac_bdir -I$abs_srcdir/$ac_bdir" ;;
  *) ac_srcdir="$abs_srcdir/$ext_dir/"; ac_bdir="$ext_dir/"; ac_inc="-I$ac_bdir -I$ac_srcdir" ;;
  esac

  b_c_pre=$php_c_pre
  b_cxx_pre=$php_cxx_pre
  b_c_meta=$php_c_meta
  b_cxx_meta=$php_cxx_meta
  b_c_post=$php_c_post
  b_cxx_post=$php_cxx_post
  b_lo=$php_lo

  old_IFS=$IFS
  for ac_src in pdo_oci.c oci_driver.c oci_statement.c; do

      IFS=.
      set $ac_src
      ac_obj=$1
      IFS=$old_IFS

      PHP_GLOBAL_OBJS="$PHP_GLOBAL_OBJS $ac_bdir$ac_obj.lo"

      case $ac_src in
        *.c) ac_comp="$b_c_pre $ac_inc $b_c_meta $ac_extra -c $ac_srcdir$ac_src -o $ac_bdir$ac_obj.$b_lo $b_c_post" ;;
        *.s) ac_comp="$b_c_pre $ac_inc $b_c_meta $ac_extra -c $ac_srcdir$ac_src -o $ac_bdir$ac_obj.$b_lo $b_c_post" ;;
        *.S) ac_comp="$b_c_pre $ac_inc $b_c_meta $ac_extra -c $ac_srcdir$ac_src -o $ac_bdir$ac_obj.$b_lo $b_c_post" ;;
        *.cpp|*.cc|*.cxx) ac_comp="$b_cxx_pre $ac_inc $b_cxx_meta $ac_extra -c $ac_srcdir$ac_src -o $ac_bdir$ac_obj.$b_lo $b_cxx_post" ;;
      esac

      ac_comp="$ac_comp -MMD -MF $ac_bdir$ac_obj.dep -MT $ac_bdir$ac_obj.lo"

    cat >>Makefile.objects<<EOF
-include $ac_bdir$ac_obj.dep
$ac_bdir$ac_obj.lo: $ac_srcdir$ac_src
    $ac_comp
EOF
  done

        EXT_STATIC="$EXT_STATIC pdo_oci;$ext_dir"
        ;;
      *)

  case $ext_dir in
  "") ac_srcdir="$abs_srcdir/"; unset ac_bdir; ac_inc="-I. -I$abs_srcdir" ;;
  /*) ac_srcdir=`echo "$ext_dir"|cut -c 2-`"/"; ac_bdir=$ac_srcdir; ac_inc="-I$ac_bdir -I$abs_srcdir/$ac_bdir" ;;
  *) ac_srcdir="$abs_srcdir/$ext_dir/"; ac_bdir="$ext_dir/"; ac_inc="-I$ac_bdir -I$ac_srcdir" ;;
  esac

  b_c_pre=$php_c_pre
  b_cxx_pre=$php_cxx_pre
  b_c_meta=$php_c_meta
  b_cxx_meta=$php_cxx_meta
  b_c_post=$php_c_post
  b_cxx_post=$php_cxx_post
  b_lo=$php_lo

  old_IFS=$IFS
  for ac_src in pdo_oci.c oci_driver.c oci_statement.c; do

      IFS=.
      set $ac_src
      ac_obj=$1
      IFS=$old_IFS

      PHP_GLOBAL_OBJS="$PHP_GLOBAL_OBJS $ac_bdir$ac_obj.lo"

      case $ac_src in
        *.c) ac_comp="$b_c_pre $ac_inc $b_c_meta $ac_extra -c $ac_srcdir$ac_src -o $ac_bdir$ac_obj.$b_lo $b_c_post" ;;
        *.s) ac_comp="$b_c_pre $ac_inc $b_c_meta $ac_extra -c $ac_srcdir$ac_src -o $ac_bdir$ac_obj.$b_lo $b_c_post" ;;
        *.S) ac_comp="$b_c_pre $ac_inc $b_c_meta $ac_extra -c $ac_srcdir$ac_src -o $ac_bdir$ac_obj.$b_lo $b_c_post" ;;
        *.cpp|*.cc|*.cxx) ac_comp="$b_cxx_pre $ac_inc $b_cxx_meta $ac_extra -c $ac_srcdir$ac_src -o $ac_bdir$ac_obj.$b_lo $b_cxx_post" ;;
      esac

      ac_comp="$ac_comp -MMD -MF $ac_bdir$ac_obj.dep -MT $ac_bdir$ac_obj.lo"

    cat >>Makefile.objects<<EOF
-include $ac_bdir$ac_obj.dep
$ac_bdir$ac_obj.lo: $ac_srcdir$ac_src
    $ac_comp
EOF
  done

        ;;
    esac
    EXT_CLI_STATIC="$EXT_CLI_STATIC pdo_oci;$ext_dir"
  fi

    BUILD_DIR="$BUILD_DIR $ext_builddir"

  if test "$ext_builddir" = "."; then
    PHP_PECL_EXTENSION=pdo_oci

  PHP_VAR_SUBST="$PHP_VAR_SUBST PHP_PECL_EXTENSION"

  fi

  PHP_VAR_SUBST="$PHP_VAR_SUBST PDO_OCI_SHARED_LIBADD"

  PHP_VAR_SUBST="$PHP_VAR_SUBST PDO_OCI_DIR"

  PHP_VAR_SUBST="$PHP_VAR_SUBST PDO_OCI_VERSION"

  am_i_shared=$PHP_PDO_OCI_SHARED
  is_it_shared=$PHP_PDO_SHARED
  is_it_enabled=$PHP_PDO
  if test "$am_i_shared" = "no" && test "$is_it_shared" = "yes" ; then
    as_fn_error $? "
You've configured extension pdo_oci to build statically, but it
depends on extension pdo, which you've configured to build shared.
You either need to build pdo_oci shared or build pdo statically for the
build to be successful.
" "$LINENO" 5
  fi
  if test "x$is_it_enabled" = "xno" && test "x" != "xtrue"; then
    as_fn_error $? "
You've configured extension pdo_oci, which depends on extension pdo,
but you've either not enabled pdo, or have disabled it.
" "$LINENO" 5
  fi

cat >>confdefs.h <<_ACEOF
#define PHP_PDO_OCI_CLIENT_VERSION "$PDO_OCI_VERSION"
_ACEOF

fi

enable_static=no
enable_shared=yes

# Check whether --enable-shared was given.
if test "${enable_shared+set}" = set; then :
  enableval=$enable_shared;     p=${PACKAGE-default}
    case $enableval in
    yes) enable_shared=yes ;;
    no) enable_shared=no ;;
    *)
      enable_shared=no
      # Look at the argument we got.  We use all the common list separators.
      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
      for pkg in $enableval; do
    IFS="$lt_save_ifs"
    if test "X$pkg" = "X$p"; then
      enable_shared=yes
    fi
      done
      IFS="$lt_save_ifs"
      ;;
    esac
else
  enable_shared=yes
fi

# Check whether --enable-static was given.
if test "${enable_static+set}" = set; then :
  enableval=$enable_static;     p=${PACKAGE-default}
    case $enableval in
    yes) enable_static=yes ;;
    no) enable_static=no ;;
    *)
     enable_static=no
      # Look at the argument we got.  We use all the common list separators.
      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
      for pkg in $enableval; do
    IFS="$lt_save_ifs"
    if test "X$pkg" = "X$p"; then
      enable_static=yes
    fi
      done
      IFS="$lt_save_ifs"
      ;;
    esac
else
  enable_static=yes
fi

# Check whether --enable-fast-install was given.
if test "${enable_fast_install+set}" = set; then :
  enableval=$enable_fast_install;     p=${PACKAGE-default}
    case $enableval in
    yes) enable_fast_install=yes ;;
    no) enable_fast_install=no ;;
    *)
      enable_fast_install=no
      # Look at the argument we got.  We use all the common list separators.
      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
      for pkg in $enableval; do
    IFS="$lt_save_ifs"
    if test "X$pkg" = "X$p"; then
      enable_fast_install=yes
    fi
      done
      IFS="$lt_save_ifs"
      ;;
    esac
else
  enable_fast_install=yes
fi

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
$as_echo_n "checking for a sed that does not truncate output... " >&6; }
if ${lt_cv_path_SED+:} false; then :
  $as_echo_n "(cached) " >&6
else
  # Loop through the user's path and test for sed and gsed.
# Then use that list of sed's as ones to test for truncation.
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for lt_ac_prog in sed gsed; do
    for ac_exec_ext in '' $ac_executable_extensions; do
      if test -f "$as_dir/$lt_ac_prog$ac_exec_ext"; then
        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
      fi
    done
  done
done
lt_ac_max=0
lt_ac_count=0
# Add /usr/xpg4/bin/sed as it is typically found on Solaris
# along with /bin/sed that truncates output.
for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
  test ! -f $lt_ac_sed && continue
  cat /dev/null > conftest.in
  lt_ac_count=0
  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
  # Check for GNU sed and select it if it is found.
  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
    lt_cv_path_SED=$lt_ac_sed
    break
  fi
  while true; do
    cat conftest.in conftest.in >conftest.tmp
    mv conftest.tmp conftest.in
    cp conftest.in conftest.nl
    echo >>conftest.nl
    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
    cmp -s conftest.out conftest.nl || break
    # 10000 chars as input seems more than enough
    test $lt_ac_count -gt 10 && break
    lt_ac_count=`expr $lt_ac_count + 1`
    if test $lt_ac_count -gt $lt_ac_max; then
      lt_ac_max=$lt_ac_count
      lt_cv_path_SED=$lt_ac_sed
    fi
  done
done

fi

SED=$lt_cv_path_SED
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $SED" >&5
$as_echo "$SED" >&6; }

# Check whether --with-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then :
  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
else
  with_gnu_ld=no
fi

ac_prog=ld
if test "$GCC" = yes; then
  # Check if gcc -print-prog-name=ld gives a path.
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
$as_echo_n "checking for ld used by $CC... " >&6; }
  case $host in
  *-*-mingw*)
    # gcc leaves a trailing carriage return which upsets mingw
    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
  *)
    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
  esac
  case $ac_prog in
    # Accept absolute paths.
    [\\/]* | ?:[\\/]*)
      re_direlt='/[^/][^/]*/\.\./'
      # Canonicalize the pathname of ld
      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
    ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
      done
      test -z "$LD" && LD="$ac_prog"
      ;;
  "")
    # If it fails, then pretend we aren't using GCC.
    ac_prog=ld
    ;;
  *)
    # If it is relative, then search for the first ld in PATH.
    with_gnu_ld=unknown
    ;;
  esac
elif test "$with_gnu_ld" = yes; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
$as_echo_n "checking for GNU ld... " >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
$as_echo_n "checking for non-GNU ld... " >&6; }
fi
if ${lt_cv_path_LD+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test -z "$LD"; then
  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
  for ac_dir in $PATH; do
    IFS="$lt_save_ifs"
    test -z "$ac_dir" && ac_dir=.
    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
      lt_cv_path_LD="$ac_dir/$ac_prog"
      # Check to see if the program is GNU ld.  I'd rather use --version,
      # but apparently some variants of GNU ld only accept -v.
      # Break only if it was the GNU/non-GNU ld that we prefer.
      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
      *GNU* | *'with BFD'*)
    test "$with_gnu_ld" != no && break
    ;;
      *)
    test "$with_gnu_ld" != yes && break
    ;;
      esac
    fi
  done
  IFS="$lt_save_ifs"
else
  lt_cv_path_LD="$LD" # Let the user override the test with a path.
fi
fi

LD="$lt_cv_path_LD"
if test -n "$LD"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
$as_echo "$LD" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
if ${lt_cv_prog_gnu_ld+:} false; then :
  $as_echo_n "(cached) " >&6
else
  # I'd rather use --version here, but apparently some GNU lds only accept -v.
case `$LD -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
  lt_cv_prog_gnu_ld=yes
  ;;
*)
  lt_cv_prog_gnu_ld=no
  ;;
esac
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
$as_echo "$lt_cv_prog_gnu_ld" >&6; }
with_gnu_ld=$lt_cv_prog_gnu_ld

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
$as_echo_n "checking for $LD option to reload object files... " >&6; }
if ${lt_cv_ld_reload_flag+:} false; then :
  $as_echo_n "(cached) " >&6
else
  lt_cv_ld_reload_flag='-r'
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
$as_echo "$lt_cv_ld_reload_flag" >&6; }
reload_flag=$lt_cv_ld_reload_flag
case $reload_flag in
"" | " "*) ;;
*) reload_flag=" $reload_flag" ;;
esac
reload_cmds='$LD$reload_flag -o $output$reload_objs'
case $host_os in
  darwin*)
    if test "$GCC" = yes; then
      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
    else
      reload_cmds='$LD$reload_flag -o $output$reload_objs'
    fi
    ;;
esac

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD-compatible nm" >&5
$as_echo_n "checking for BSD-compatible nm... " >&6; }
if ${lt_cv_path_NM+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test -n "$NM"; then
  # Let the user override the test.
  lt_cv_path_NM="$NM"
else
  lt_nm_to_check="${ac_tool_prefix}nm"
  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
    lt_nm_to_check="$lt_nm_to_check nm"
  fi
  for lt_tmp_nm in $lt_nm_to_check; do
    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
      IFS="$lt_save_ifs"
      test -z "$ac_dir" && ac_dir=.
      tmp_nm="$ac_dir/$lt_tmp_nm"
      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
    # Check to see if the nm accepts a BSD-compat flag.
    # Adding the `sed 1q' prevents false positives on HP-UX, which says:
    #   nm: unknown option "B" ignored
    # Tru64's nm complains that /dev/null is an invalid object file
    case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
    */dev/null* | *'Invalid file or object type'*)
      lt_cv_path_NM="$tmp_nm -B"
      break
      ;;
    *)
      case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
      */dev/null*)
        lt_cv_path_NM="$tmp_nm -p"
        break
        ;;
      *)
        lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
        continue # so that we can try to find one that supports BSD flags
        ;;
      esac
      ;;
    esac
      fi
    done
    IFS="$lt_save_ifs"
  done
  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
$as_echo "$lt_cv_path_NM" >&6; }
NM="$lt_cv_path_NM"

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
$as_echo_n "checking whether ln -s works... " >&6; }
LN_S=$as_ln_s
if test "$LN_S" = "ln -s"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
$as_echo "no, using $LN_S" >&6; }
fi

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
$as_echo_n "checking how to recognize dependent libraries... " >&6; }
if ${lt_cv_deplibs_check_method+:} false; then :
  $as_echo_n "(cached) " >&6
else
  lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_deplibs_check_method='unknown'
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
# `unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# 'file_magic [[regex]]' -- check by looking for files in library path
# which responds to the $file_magic_cmd with a given extended regex.
# If you have `file' or equivalent on your system and you're not sure
# whether `pass_all' will *always* work, you probably want this one.

case $host_os in
aix[4-9]*)
  lt_cv_deplibs_check_method=pass_all
  ;;

beos* | haiku*)
  lt_cv_deplibs_check_method=pass_all
  ;;

bsdi[45]*)
  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
  lt_cv_file_magic_cmd='/usr/bin/file -L'
  lt_cv_file_magic_test_file=/shlib/libc.so
  ;;

cygwin*)
  # func_win32_libid is a shell function defined in ltmain.sh
  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
  lt_cv_file_magic_cmd='func_win32_libid'
  ;;

mingw* | pw32*)
  # Base MSYS/MinGW do not provide the 'file' command needed by
  # func_win32_libid shell function, so use a weaker test based on 'objdump',
  # unless we find 'file', for example because we are cross-compiling.
  if ( file / ) >/dev/null 2>&1; then
    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
    lt_cv_file_magic_cmd='func_win32_libid'
  else
    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
    lt_cv_file_magic_cmd='$OBJDUMP -f'
  fi
  ;;

darwin* | rhapsody*)
  lt_cv_deplibs_check_method=pass_all
  ;;

freebsd* | dragonfly*)
  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
    case $host_cpu in
    i*86 )
      # Not sure whether the presence of OpenBSD here was a mistake.
      # Let's accept both of them until this is cleared up.
      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
      lt_cv_file_magic_cmd=/usr/bin/file
      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
      ;;
    esac
  else
    lt_cv_deplibs_check_method=pass_all
  fi
  ;;

gnu*)
  lt_cv_deplibs_check_method=pass_all
  ;;

hpux10.20* | hpux11*)
  lt_cv_file_magic_cmd=/usr/bin/file
  case $host_cpu in
  ia64*)
    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
    ;;
  hppa*64*)
    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
    ;;
  *)
    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
    lt_cv_file_magic_test_file=/usr/lib/libc.sl
    ;;
  esac
  ;;

interix[3-9]*)
  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
  ;;

irix5* | irix6* | nonstopux*)
  case $LD in
  *-32|*"-32 ") libmagic=32-bit;;
  *-n32|*"-n32 ") libmagic=N32;;
  *-64|*"-64 ") libmagic=64-bit;;
  *) libmagic=never-match;;
  esac
  lt_cv_deplibs_check_method=pass_all
  ;;

# This must be Linux ELF.
linux* | k*bsd*-gnu)
  lt_cv_deplibs_check_method=pass_all
  ;;

netbsd*)
  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
  else
    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
  fi
  ;;

newos6*)
  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
  lt_cv_file_magic_cmd=/usr/bin/file
  lt_cv_file_magic_test_file=/usr/lib/libnls.so
  ;;

nto-qnx*)
  lt_cv_deplibs_check_method=unknown
  ;;

openbsd*)
  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
  else
    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
  fi
  ;;

osf3* | osf4* | osf5*)
  lt_cv_deplibs_check_method=pass_all
  ;;

rdos*)
  lt_cv_deplibs_check_method=pass_all
  ;;

solaris*)
  lt_cv_deplibs_check_method=pass_all
  ;;

sysv4 | sysv4.3*)
  case $host_vendor in
  motorola)
    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
    ;;
  ncr)
    lt_cv_deplibs_check_method=pass_all
    ;;
  sequent)
    lt_cv_file_magic_cmd='/bin/file'
    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
    ;;
  sni)
    lt_cv_file_magic_cmd='/bin/file'
    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
    lt_cv_file_magic_test_file=/lib/libc.so
    ;;
  siemens)
    lt_cv_deplibs_check_method=pass_all
    ;;
  pc)
    lt_cv_deplibs_check_method=pass_all
    ;;
  esac
  ;;

sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
  lt_cv_deplibs_check_method=pass_all
  ;;
esac

fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
$as_echo "$lt_cv_deplibs_check_method" >&6; }
file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method
test -z "$deplibs_check_method" && deplibs_check_method=unknown

# If no C compiler was specified, use CC.
LTCC=${LTCC-"$CC"}

# If no C compiler flags were specified, use CFLAGS.
LTCFLAGS=${LTCFLAGS-"$CFLAGS"}

# Allow CC to be a program name with arguments.
compiler=$CC

#AC_ARG_ENABLE([libtool-lock],
#[  --disable-libtool-lock  avoid locking (might break parallel builds)])
#test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes

# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case $host in
ia64-*-hpux*)
  # Find out which ABI we are using.
  echo 'int i;' > conftest.$ac_ext
  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; }; then
    case `/usr/bin/file conftest.$ac_objext` in
    *ELF-32*)
      HPUX_IA64_MODE="32"
      ;;
    *ELF-64*)
      HPUX_IA64_MODE="64"
      ;;
    esac
  fi
  rm -rf conftest*
  ;;
*-*-irix6*)
  # Find out which ABI we are using.
  echo '#line 6691 "configure"' > conftest.$ac_ext
  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; }; then
   if test "$lt_cv_prog_gnu_ld" = yes; then
    case `/usr/bin/file conftest.$ac_objext` in
    *32-bit*)
      LD="${LD-ld} -melf32bsmip"
      ;;
    *N32*)
      LD="${LD-ld} -melf32bmipn32"
      ;;
    *64-bit*)
      LD="${LD-ld} -melf64bmip"
      ;;
    esac
   else
    case `/usr/bin/file conftest.$ac_objext` in
    *32-bit*)
      LD="${LD-ld} -32"
      ;;
    *N32*)
      LD="${LD-ld} -n32"
      ;;
    *64-bit*)
      LD="${LD-ld} -64"
      ;;
    esac
   fi
  fi
  rm -rf conftest*
  ;;

x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
s390*-*linux*|sparc*-*linux*)
  # Find out which ABI we are using.
  echo 'int i;' > conftest.$ac_ext
  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; }; then
    case `/usr/bin/file conftest.o` in
    *32-bit*)
      case $host in
        x86_64-*kfreebsd*-gnu)
          LD="${LD-ld} -m elf_i386_fbsd"
          ;;
        x86_64-*linux*)
          LD="${LD-ld} -m elf_i386"
          ;;
        powerpc64le-*linux*)
          LD="${LD-ld} -m elf32lppclinux"
          ;;
        powerpc64-*linux*)
          LD="${LD-ld} -m elf32ppclinux"
          ;;
        s390x-*linux*)
          LD="${LD-ld} -m elf_s390"
          ;;
        sparc64-*linux*)
          LD="${LD-ld} -m elf32_sparc"
          ;;
      esac
      ;;
    *64-bit*)
      case $host in
        x86_64-*kfreebsd*-gnu)
          LD="${LD-ld} -m elf_x86_64_fbsd"
          ;;
        x86_64-*linux*)
          LD="${LD-ld} -m elf_x86_64"
          ;;
        powerpcle-*linux*)
          LD="${LD-ld} -m elf64lppc"
          ;;
        powerpc-*linux*)
          LD="${LD-ld} -m elf64ppc"
          ;;
        s390*-*linux*)
          LD="${LD-ld} -m elf64_s390"
          ;;
        sparc*-*linux*)
          LD="${LD-ld} -m elf64_sparc"
          ;;
      esac
      ;;
    esac
  fi
  rm -rf conftest*
  ;;

*-*-sco3.2v5*)
  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
  SAVE_CFLAGS="$CFLAGS"
  CFLAGS="$CFLAGS -belf"
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
if ${lt_cv_cc_needs_belf+:} false; then :
  $as_echo_n "(cached) " >&6
else
  ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu

     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */

int
main ()
{

  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
  lt_cv_cc_needs_belf=yes
else
  lt_cv_cc_needs_belf=no
fi
rm -f core conftest.err conftest.$ac_objext \
    conftest$ac_exeext conftest.$ac_ext
    ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu

fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
$as_echo "$lt_cv_cc_needs_belf" >&6; }
  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
    CFLAGS="$SAVE_CFLAGS"
  fi
  ;;
sparc*-*solaris*)
  # Find out which ABI we are using.
  echo 'int i;' > conftest.$ac_ext
  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; }; then
    case `/usr/bin/file conftest.o` in
    *64-bit*)
      case $lt_cv_prog_gnu_ld in
      yes*) LD="${LD-ld} -m elf64_sparc" ;;
      *)
        if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
      LD="${LD-ld} -64"
    fi
    ;;
      esac
      ;;
    esac
  fi
  rm -rf conftest*
  ;;

esac

need_locks="$enable_libtool_lock"

for ac_header in dlfcn.h
do :
  ac_fn_c_check_header_mongrel "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default"
if test "x$ac_cv_header_dlfcn_h" = xyes; then :
  cat >>confdefs.h <<_ACEOF
#define HAVE_DLFCN_H 1
_ACEOF

fi

done

if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
    (test "X$CXX" != "Xg++"))) ; then
  php_prog_cxxcpp=disabled
fi

# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
# find the maximum length of command line arguments
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
$as_echo_n "checking the maximum length of command line arguments... " >&6; }
if ${lt_cv_sys_max_cmd_len+:} false; then :
  $as_echo_n "(cached) " >&6
else
    i=0
  teststring="ABCD"

  case $build_os in
  msdosdjgpp*)
    # On DJGPP, this test can blow up pretty badly due to problems in libc
    # (any single argument exceeding 2000 bytes causes a buffer overrun
    # during glob expansion).  Even if it were fixed, the result of this
    # check would be larger than it should be.
    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
    ;;

  gnu*)
    # Under GNU Hurd, this test is not required because there is
    # no limit to the length of command line arguments.
    # Libtool will interpret -1 as no limit whatsoever
    lt_cv_sys_max_cmd_len=-1;
    ;;

  cygwin* | mingw*)
    # On Win9x/ME, this test blows up -- it succeeds, but takes
    # about 5 minutes as the teststring grows exponentially.
    # Worse, since 9x/ME are not pre-emptively multitasking,
    # you end up with a "frozen" computer, even though with patience
    # the test eventually succeeds (with a max line length of 256k).
    # Instead, let's just punt: use the minimum linelength reported by
    # all of the supported platforms: 8192 (on NT/2K/XP).
    lt_cv_sys_max_cmd_len=8192;
    ;;

  amigaos*)
    # On AmigaOS with pdksh, this test takes hours, literally.
    # So we just punt and use a minimum line length of 8192.
    lt_cv_sys_max_cmd_len=8192;
    ;;

  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
    # This has been around since 386BSD, at least.  Likely further.
    if test -x /sbin/sysctl; then
      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
    elif test -x /usr/sbin/sysctl; then
      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
    else
      lt_cv_sys_max_cmd_len=65536   # usable default for all BSDs
    fi
    # And add a safety zone
    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
    ;;

  interix*)
    # We know the value 262144 and hardcode it with a safety zone (like BSD)
    lt_cv_sys_max_cmd_len=196608
    ;;

  osf*)
    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
    # nice to cause kernel panics so lets avoid the loop below.
    # First set a reasonable default.
    lt_cv_sys_max_cmd_len=16384
    #
    if test -x /sbin/sysconfig; then
      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
        *1*) lt_cv_sys_max_cmd_len=-1 ;;
      esac
    fi
    ;;
  sco3.2v5*)
    lt_cv_sys_max_cmd_len=102400
    ;;
  sysv5* | sco5v6* | sysv4.2uw2*)
    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
    if test -n "$kargmax"; then
      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[   ]//'`
    else
      lt_cv_sys_max_cmd_len=32768
    fi
    ;;
  *)
    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
    if test -n "$lt_cv_sys_max_cmd_len"; then
      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
    else
      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
      while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
           = "XX$teststring") >/dev/null 2>&1 &&
          new_result=`expr "X$teststring" : ".*" 2>&1` &&
          lt_cv_sys_max_cmd_len=$new_result &&
          test $i != 17 # 1/2 MB should be enough
      do
        i=`expr $i + 1`
        teststring=$teststring$teststring
      done
      teststring=
      # Add a significant safety factor because C++ compilers can tack on massive
      # amounts of additional arguments before passing them to the linker.
      # It appears as though 1/2 is a usable value.
      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
    fi
    ;;
  esac

fi

if test -n $lt_cv_sys_max_cmd_len ; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
$as_echo "none" >&6; }
fi

# Check for command to grab the raw symbol name followed by C symbol from nm.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
if ${lt_cv_sys_global_symbol_pipe+:} false; then :
  $as_echo_n "(cached) " >&6
else

# These are sane defaults that work on at least a few old systems.
# [They come from Ultrix.  What could be older than Ultrix?!! ;)]

# Character class describing NM global symbol codes.
symcode='[BCDEGRST]'

# Regexp to match symbols that can be accessed directly from C.
sympat='\([_A-Za-z][_A-Za-z0-9]*\)'

# Transform an extracted symbol line into a proper C declaration
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"

# Transform an extracted symbol line into symbol name and symbol address
lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"

# Define system-specific variables.
case $host_os in
aix*)
  symcode='[BCDT]'
  ;;
cygwin* | mingw* | pw32*)
  symcode='[ABCDGISTW]'
  ;;
hpux*) # Its linker distinguishes data from code symbols
  if test "$host_cpu" = ia64; then
    symcode='[ABCDEGRST]'
  fi
  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
  ;;
linux* | k*bsd*-gnu)
  if test "$host_cpu" = ia64; then
    symcode='[ABCDGIRSTW]'
    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
  fi
  ;;
irix* | nonstopux*)
  symcode='[BCDEGRST]'
  ;;
osf*)
  symcode='[BCDEGQRST]'
  ;;
solaris*)
  symcode='[BDRT]'
  ;;
sco3.2v5*)
  symcode='[DT]'
  ;;
sysv4.2uw2*)
  symcode='[DT]'
  ;;
sysv5* | sco5v6* | unixware* | OpenUNIX*)
  symcode='[ABDT]'
  ;;
sysv4)
  symcode='[DFNSTU]'
  ;;
esac

# Handle CRLF in mingw tool chain
opt_cr=
case $build_os in
mingw*)
  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
  ;;
esac

# If we're using GNU nm, then use its standard symbol codes.
case `$NM -V 2>&1` in
*GNU* | *'with BFD'*)
  symcode='[ABCDGIRSTW]' ;;
esac

# Try without a prefix undercore, then with it.
for ac_symprfx in "" "_"; do

  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
  symxfrm="\\1 $ac_symprfx\\2 \\2"

  # Write the raw and C identifiers.
  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[     ]\($symcode$symcode*\)[     ][  ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"

  # Check to see that the pipe works correctly.
  pipe_works=no

  rm -f conftest*
  cat > conftest.$ac_ext <<EOF
#ifdef __cplusplus
extern "C" {
#endif
char nm_test_var;
void nm_test_func(){}
#ifdef __cplusplus
}
#endif
int main(){nm_test_var='a';nm_test_func();return(0);}
EOF

  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; }; then
    # Now try to grab the symbols.
    nlist=conftest.nm
    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\""; } >&5
  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; } && test -s "$nlist"; then
      # Try sorting and uniquifying the output.
      if sort "$nlist" | uniq > "$nlist"T; then
    mv -f "$nlist"T "$nlist"
      else
    rm -f "$nlist"T
      fi

      # Make sure that we snagged all the symbols we need.
      if grep ' nm_test_var$' "$nlist" >/dev/null; then
    if grep ' nm_test_func$' "$nlist" >/dev/null; then
      cat <<EOF > conftest.$ac_ext
#ifdef __cplusplus
extern "C" {
#endif

EOF
      # Now generate the symbol file.
      eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'

      cat <<EOF >> conftest.$ac_ext
#if defined (__STDC__) && __STDC__
# define lt_ptr_t void *
#else
# define lt_ptr_t char *
# define const
#endif

/* The mapping between symbol names and symbols. */
const struct {
  const char *name;
  lt_ptr_t address;
}
lt_preloaded_symbols[] =
{
EOF
      $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
      cat <<\EOF >> conftest.$ac_ext
  {0, (lt_ptr_t) 0}
};

#ifdef __cplusplus
}
#endif
EOF
      # Now try linking the two files.
      mv conftest.$ac_objext conftstm.$ac_objext
      lt_save_LIBS="$LIBS"
      lt_save_CFLAGS="$CFLAGS"
      LIBS="conftstm.$ac_objext"
      CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
      if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; } && test -s conftest${ac_exeext}; then
        pipe_works=yes
      fi
      LIBS="$lt_save_LIBS"
      CFLAGS="$lt_save_CFLAGS"
    else
      echo "cannot find nm_test_func in $nlist" >&5
    fi
      else
    echo "cannot find nm_test_var in $nlist" >&5
      fi
    else
      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
    fi
  else
    echo "$progname: failed program was:" >&5
    cat conftest.$ac_ext >&5
  fi
  rm -rf conftest* conftst*

  # Do not use the global_symbol_pipe unless it works.
  if test "$pipe_works" = yes; then
    break
  else
    lt_cv_sys_global_symbol_pipe=
  fi
done

fi

if test -z "$lt_cv_sys_global_symbol_pipe"; then
  lt_cv_sys_global_symbol_to_cdecl=
fi
if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
$as_echo "failed" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
$as_echo "ok" >&6; }
fi

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
$as_echo_n "checking for objdir... " >&6; }
if ${lt_cv_objdir+:} false; then :
  $as_echo_n "(cached) " >&6
else
  rm -f .libs 2>/dev/null
mkdir .libs 2>/dev/null
if test -d .libs; then
  lt_cv_objdir=.libs
else
  # MS-DOS does not allow filenames that begin with a dot.
  lt_cv_objdir=_libs
fi
rmdir .libs 2>/dev/null
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
$as_echo "$lt_cv_objdir" >&6; }
objdir=$lt_cv_objdir

case $host_os in
aix3*)
  # AIX sometimes has problems with the GCC collect2 program.  For some
  # reason, if we set the COLLECT_NAMES environment variable, the problems
  # vanish in a puff of smoke.
  if test "X${COLLECT_NAMES+set}" != Xset; then
    COLLECT_NAMES=
    export COLLECT_NAMES
  fi
  ;;
esac

# Sed substitution that helps us do robust quoting.  It backslashifies
# metacharacters that are still active within double-quoted strings.
Xsed='sed -e 1s/^X//'
sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'

# Same as above, but do not quote variable references.
double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'

# Sed substitution to delay expansion of an escaped shell variable in a
# double_quote_subst'ed string.
delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'

# Sed substitution to avoid accidental globbing in evaled expressions
no_glob_subst='s/\*/\\\*/g'

# Constants:
rm="rm -f"

# Global variables:
default_ofile=libtool
can_build_shared=yes

# All known linkers require a `.a' archive for static linking (except MSVC,
# which needs '.lib').
libext=a
ltmain="$ac_aux_dir/ltmain.sh"
ofile="$default_ofile"
with_gnu_ld="$lt_cv_prog_gnu_ld"

if test -n "$ac_tool_prefix"; then
  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_AR+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test -n "$AR"; then
  ac_cv_prog_AR="$AR" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    for ac_exec_ext in '' $ac_executable_extensions; do
  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_AR="${ac_tool_prefix}ar"
    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
  done
IFS=$as_save_IFS

fi
fi
AR=$ac_cv_prog_AR
if test -n "$AR"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
$as_echo "$AR" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi

fi
if test -z "$ac_cv_prog_AR"; then
  ac_ct_AR=$AR
  # Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_AR+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test -n "$ac_ct_AR"; then
  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    for ac_exec_ext in '' $ac_executable_extensions; do
  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_ac_ct_AR="ar"
    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
  done
IFS=$as_save_IFS

fi
fi
ac_ct_AR=$ac_cv_prog_ac_ct_AR
if test -n "$ac_ct_AR"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
$as_echo "$ac_ct_AR" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi

  if test "x$ac_ct_AR" = x; then
    AR="false"
  else
    case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
    AR=$ac_ct_AR
  fi
else
  AR="$ac_cv_prog_AR"
fi

if test -n "$ac_tool_prefix"; then
  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_RANLIB+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test -n "$RANLIB"; then
  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    for ac_exec_ext in '' $ac_executable_extensions; do
  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
  done
IFS=$as_save_IFS

fi
fi
RANLIB=$ac_cv_prog_RANLIB
if test -n "$RANLIB"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
$as_echo "$RANLIB" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi

fi
if test -z "$ac_cv_prog_RANLIB"; then
  ac_ct_RANLIB=$RANLIB
  # Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test -n "$ac_ct_RANLIB"; then
  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    for ac_exec_ext in '' $ac_executable_extensions; do
  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_ac_ct_RANLIB="ranlib"
    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
  done
IFS=$as_save_IFS

fi
fi
ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
if test -n "$ac_ct_RANLIB"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
$as_echo "$ac_ct_RANLIB" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi

  if test "x$ac_ct_RANLIB" = x; then
    RANLIB=":"
  else
    case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
    RANLIB=$ac_ct_RANLIB
  fi
else
  RANLIB="$ac_cv_prog_RANLIB"
fi

if test -n "$ac_tool_prefix"; then
  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_STRIP+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test -n "$STRIP"; then
  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    for ac_exec_ext in '' $ac_executable_extensions; do
  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
  done
IFS=$as_save_IFS

fi
fi
STRIP=$ac_cv_prog_STRIP
if test -n "$STRIP"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
$as_echo "$STRIP" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi

fi
if test -z "$ac_cv_prog_STRIP"; then
  ac_ct_STRIP=$STRIP
  # Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test -n "$ac_ct_STRIP"; then
  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    for ac_exec_ext in '' $ac_executable_extensions; do
  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_ac_ct_STRIP="strip"
    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
  done
IFS=$as_save_IFS

fi
fi
ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
if test -n "$ac_ct_STRIP"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
$as_echo "$ac_ct_STRIP" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi

  if test "x$ac_ct_STRIP" = x; then
    STRIP=":"
  else
    case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
    STRIP=$ac_ct_STRIP
  fi
else
  STRIP="$ac_cv_prog_STRIP"
fi

old_CC="$CC"
old_CFLAGS="$CFLAGS"

# Set sane defaults for various variables
test -z "$AR" && AR=ar
test -z "$AR_FLAGS" && AR_FLAGS=cru
test -z "$AS" && AS=as
test -z "$CC" && CC=cc
test -z "$LTCC" && LTCC=$CC
test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
test -z "$DLLTOOL" && DLLTOOL=dlltool
test -z "$LD" && LD=ld
test -z "$LN_S" && LN_S="ln -s"
test -z "$MAGIC_CMD" && MAGIC_CMD=file
test -z "$NM" && NM=nm
test -z "$SED" && SED=sed
test -z "$OBJDUMP" && OBJDUMP=objdump
test -z "$RANLIB" && RANLIB=:
test -z "$STRIP" && STRIP=:
test -z "$ac_objext" && ac_objext=o

# Determine commands to create old-style static archives.
old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
old_postinstall_cmds='chmod 644 $oldlib'
old_postuninstall_cmds=

if test -n "$RANLIB"; then
  case $host_os in
  openbsd*)
    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
    ;;
  *)
    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
    ;;
  esac
  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
fi

for cc_temp in $compiler""; do
  case $cc_temp in
    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
    \-*) ;;
    *) break;;
  esac
done
cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`

# Only perform the check for file, if the check method requires it
case $deplibs_check_method in
file_magic*)
  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
if ${lt_cv_path_MAGIC_CMD+:} false; then :
  $as_echo_n "(cached) " >&6
else
  case $MAGIC_CMD in
[\\/*] |  ?:[\\/]*)
  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
  ;;
*)
  lt_save_MAGIC_CMD="$MAGIC_CMD"
  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
  for ac_dir in $ac_dummy; do
    IFS="$lt_save_ifs"
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/${ac_tool_prefix}file; then
      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
      if test -n "$file_magic_test_file"; then
    case $deplibs_check_method in
    "file_magic "*)
      file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
      MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
      if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
        $EGREP "$file_magic_regex" > /dev/null; then
        :
      else
        cat <<EOF 1>&2

*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such.  This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem.  Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org

EOF
      fi ;;
    esac
      fi
      break
    fi
  done
  IFS="$lt_save_ifs"
  MAGIC_CMD="$lt_save_MAGIC_CMD"
  ;;
esac
fi

MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if test -n "$MAGIC_CMD"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
$as_echo "$MAGIC_CMD" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi

if test -z "$lt_cv_path_MAGIC_CMD"; then
  if test -n "$ac_tool_prefix"; then
    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
$as_echo_n "checking for file... " >&6; }
if ${lt_cv_path_MAGIC_CMD+:} false; then :
  $as_echo_n "(cached) " >&6
else
  case $MAGIC_CMD in
[\\/*] |  ?:[\\/]*)
  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
  ;;
*)
  lt_save_MAGIC_CMD="$MAGIC_CMD"
  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
  for ac_dir in $ac_dummy; do
    IFS="$lt_save_ifs"
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/file; then
      lt_cv_path_MAGIC_CMD="$ac_dir/file"
      if test -n "$file_magic_test_file"; then
    case $deplibs_check_method in
    "file_magic "*)
      file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
      MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
      if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
        $EGREP "$file_magic_regex" > /dev/null; then
        :
      else
        cat <<EOF 1>&2

*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such.  This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem.  Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org

EOF
      fi ;;
    esac
      fi
      break
    fi
  done
  IFS="$lt_save_ifs"
  MAGIC_CMD="$lt_save_MAGIC_CMD"
  ;;
esac
fi

MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if test -n "$MAGIC_CMD"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
$as_echo "$MAGIC_CMD" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi

  else
    MAGIC_CMD=:
  fi
fi

  fi
  ;;
esac

  case $host_os in
    rhapsody* | darwin*)
    if test -n "$ac_tool_prefix"; then
  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_DSYMUTIL+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test -n "$DSYMUTIL"; then
  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    for ac_exec_ext in '' $ac_executable_extensions; do
  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
  done
IFS=$as_save_IFS

fi
fi
DSYMUTIL=$ac_cv_prog_DSYMUTIL
if test -n "$DSYMUTIL"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
$as_echo "$DSYMUTIL" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi

fi
if test -z "$ac_cv_prog_DSYMUTIL"; then
  ac_ct_DSYMUTIL=$DSYMUTIL
  # Extract the first word of "dsymutil", so it can be a program name with args.
set dummy dsymutil; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test -n "$ac_ct_DSYMUTIL"; then
  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    for ac_exec_ext in '' $ac_executable_extensions; do
  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
  done
IFS=$as_save_IFS

fi
fi
ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
if test -n "$ac_ct_DSYMUTIL"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
$as_echo "$ac_ct_DSYMUTIL" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi

  if test "x$ac_ct_DSYMUTIL" = x; then
    DSYMUTIL=":"
  else
    case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
    DSYMUTIL=$ac_ct_DSYMUTIL
  fi
else
  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
fi

    if test -n "$ac_tool_prefix"; then
  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
set dummy ${ac_tool_prefix}nmedit; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_NMEDIT+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test -n "$NMEDIT"; then
  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    for ac_exec_ext in '' $ac_executable_extensions; do
  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
  done
IFS=$as_save_IFS

fi
fi
NMEDIT=$ac_cv_prog_NMEDIT
if test -n "$NMEDIT"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
$as_echo "$NMEDIT" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi

fi
if test -z "$ac_cv_prog_NMEDIT"; then
  ac_ct_NMEDIT=$NMEDIT
  # Extract the first word of "nmedit", so it can be a program name with args.
set dummy nmedit; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test -n "$ac_ct_NMEDIT"; then
  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    for ac_exec_ext in '' $ac_executable_extensions; do
  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_ac_ct_NMEDIT="nmedit"
    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
  done
IFS=$as_save_IFS

fi
fi
ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
if test -n "$ac_ct_NMEDIT"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
$as_echo "$ac_ct_NMEDIT" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi

  if test "x$ac_ct_NMEDIT" = x; then
    NMEDIT=":"
  else
    case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
    NMEDIT=$ac_ct_NMEDIT
  fi
else
  NMEDIT="$ac_cv_prog_NMEDIT"
fi

    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
$as_echo_n "checking for -single_module linker flag... " >&6; }
if ${lt_cv_apple_cc_single_mod+:} false; then :
  $as_echo_n "(cached) " >&6
else
  lt_cv_apple_cc_single_mod=no
      if test -z "${LT_MULTI_MODULE}"; then
   # By default we will add the -single_module flag. You can override
   # by either setting the environment variable LT_MULTI_MODULE
   # non-empty at configure time, or by adding -multi_module to the
   # link flags.
   echo "int foo(void){return 1;}" > conftest.c
   $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
     -dynamiclib ${wl}-single_module conftest.c
   if test -f libconftest.dylib; then
     lt_cv_apple_cc_single_mod=yes
     rm -rf libconftest.dylib*
   fi
   rm conftest.c
      fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
if ${lt_cv_ld_exported_symbols_list+:} false; then :
  $as_echo_n "(cached) " >&6
else
  lt_cv_ld_exported_symbols_list=no
      save_LDFLAGS=$LDFLAGS
      echo "_main" > conftest.sym
      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"

cat > conftest.$ac_ext <<EOF
#line 7969 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; } && test -s conftest${ac_exeext}; then
 lt_cv_ld_exported_symbols_list=yes
  rm -rf conftest*
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&6
lt_cv_ld_exported_symbols_list=no
  rm -rf conftest*
fi
rm -f conftest*
   LDFLAGS="$save_LDFLAGS"

fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
    case $host_os in
    rhapsody* | darwin1.[0123])
      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
    darwin1.*)
     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
    darwin*)
      # if running on 10.5 or later, the deployment target defaults
      # to the OS version, if on x86, and 10.4, the deployment
      # target defaults to 10.4. Don't you love it?
      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
   10.0,*86*-darwin8*|10.0,*-darwin[91]*)
     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
   10.[012]*)
     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
   *)
     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
      esac
    ;;
  esac
    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
      _lt_dar_single_mod='$single_module'
    fi
    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
    else
      _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}"
    fi
    if test "$DSYMUTIL" != ":"; then
      _lt_dsymutil="~$DSYMUTIL \$lib || :"
    else
      _lt_dsymutil=
    fi
    ;;
  esac

enable_dlopen=no
enable_win32_dll=no

# Check whether --enable-libtool-lock was given.
if test "${enable_libtool_lock+set}" = set; then :
  enableval=$enable_libtool_lock;
fi

test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes

# Check whether --with-pic was given.
if test "${with_pic+set}" = set; then :
  withval=$with_pic; pic_mode="$withval"
else
  pic_mode=default
fi

test -z "$pic_mode" && pic_mode=default

# Use C for the default configuration in the libtool script
tagname=
lt_save_CC="$CC"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu

# Source file extension for C test sources.
ac_ext=c

# Object file extension for compiled C test sources.
objext=o
objext=$objext

# Code to be used in simple compile tests
lt_simple_compile_test_code="int some_variable = 0;"

# Code to be used in simple link tests
lt_simple_link_test_code='int main(){return(0);}'

# If no C compiler was specified, use CC.
LTCC=${LTCC-"$CC"}

# If no C compiler flags were specified, use CFLAGS.
LTCFLAGS=${LTCFLAGS-"$CFLAGS"}

# Allow CC to be a program name with arguments.
compiler=$CC

# save warnings/boilerplate of simple test code
ac_outfile=conftest.$ac_objext
echo "$lt_simple_compile_test_code" >conftest.$ac_ext
eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_compiler_boilerplate=`cat conftest.err`
$rm conftest*

ac_outfile=conftest.$ac_objext
echo "$lt_simple_link_test_code" >conftest.$ac_ext
eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_linker_boilerplate=`cat conftest.err`
$rm -r conftest*

## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...

lt_prog_compiler_no_builtin_flag=

if test "$GCC" = yes; then
  lt_prog_compiler_no_builtin_flag=' -fno-builtin'

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
  $as_echo_n "(cached) " >&6
else
  lt_cv_prog_compiler_rtti_exceptions=no
  ac_outfile=conftest.$ac_objext
   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
   lt_compiler_flag="-fno-rtti -fno-exceptions"
   # Insert the option either (1) after the last *FLAGS variable, or
   # (2) before a word containing "conftest.", or (3) at the end.
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   # The option is referenced via a variable to avoid confusing sed.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"configure:8126: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>conftest.err)
   ac_status=$?
   cat conftest.err >&5
   echo "configure:8130: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s "$ac_outfile"; then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings other than the usual output.
     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
       lt_cv_prog_compiler_rtti_exceptions=yes
     fi
   fi
   $rm conftest*

fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }

if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
else
    :
fi

fi

lt_prog_compiler_wl=
lt_prog_compiler_pic=
lt_prog_compiler_static=

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
$as_echo_n "checking for $compiler option to produce PIC... " >&6; }

  if test "$GCC" = yes; then
    lt_prog_compiler_wl='-Wl,'
    lt_prog_compiler_static='-static'

    case $host_os in
      aix*)
      # All AIX code is PIC.
      if test "$host_cpu" = ia64; then
    # AIX 5 now supports IA64 processor
    lt_prog_compiler_static='-Bstatic'
      fi
      ;;

    amigaos*)
      # FIXME: we need at least 68020 code to build shared libraries, but
      # adding the `-m68020' flag to GCC prevents building anything better,
      # like `-m68040'.
      lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
      ;;

    beos* | haiku* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
      # PIC is the default for these OSes.
      ;;

    mingw* | cygwin* | pw32* | os2*)
      # This hack is so that the source file can tell whether it is being
      # built for inclusion in a dll (and should export symbols for example).
      # Although the cygwin gcc ignores -fPIC, still need this for old-style
      # (--disable-auto-import) libraries
      lt_prog_compiler_pic='-DDLL_EXPORT'
      ;;

    darwin* | rhapsody*)
      # PIC is the default on this platform
      # Common symbols not allowed in MH_DYLIB files
      lt_prog_compiler_pic='-fno-common'
      ;;

    interix[3-9]*)
      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
      # Instead, we relocate shared libraries at runtime.
      ;;

    msdosdjgpp*)
      # Just because we use GCC doesn't mean we suddenly get shared libraries
      # on systems that don't support them.
      lt_prog_compiler_can_build_shared=no
      enable_shared=no
      ;;

    sysv4*MP*)
      if test -d /usr/nec; then
    lt_prog_compiler_pic=-Kconform_pic
      fi
      ;;

    hpux*)
      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
      # not for PA HP-UX.
      case $host_cpu in
      hppa*64*|ia64*)
    # +Z the default
    ;;
      *)
    lt_prog_compiler_pic='-fPIC'
    ;;
      esac
      ;;

    *)
      lt_prog_compiler_pic='-fPIC'
      ;;
    esac
  else
    # PORTME Check for flag to pass linker flags through the system compiler.
    case $host_os in
    aix*)
      lt_prog_compiler_wl='-Wl,'
      if test "$host_cpu" = ia64; then
    # AIX 5 now supports IA64 processor
    lt_prog_compiler_static='-Bstatic'
      else
    lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
      fi
      ;;
      darwin*)
        # PIC is the default on this platform
        # Common symbols not allowed in MH_DYLIB files
       case $cc_basename in
         xlc*)
         lt_prog_compiler_pic='-qnocommon'
         lt_prog_compiler_wl='-Wl,'
         ;;
       esac
       ;;

    mingw* | cygwin* | pw32* | os2*)
      # This hack is so that the source file can tell whether it is being
      # built for inclusion in a dll (and should export symbols for example).
      lt_prog_compiler_pic='-DDLL_EXPORT'
      ;;

    hpux9* | hpux10* | hpux11*)
      lt_prog_compiler_wl='-Wl,'
      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
      # not for PA HP-UX.
      case $host_cpu in
      hppa*64*|ia64*)
    # +Z the default
    ;;
      *)
    lt_prog_compiler_pic='+Z'
    ;;
      esac
      # Is there a better lt_prog_compiler_static that works with the bundled CC?
      lt_prog_compiler_static='${wl}-a ${wl}archive'
      ;;

    irix5* | irix6* | nonstopux*)
      lt_prog_compiler_wl='-Wl,'
      # PIC (with -KPIC) is the default.
      lt_prog_compiler_static='-non_shared'
      ;;

    newsos6)
      lt_prog_compiler_pic='-KPIC'
      lt_prog_compiler_static='-Bstatic'
      ;;

    linux* | k*bsd*-gnu)
      case $cc_basename in
      # old Intel for x86_64 which still supported -KPIC.
      ecc*)
        lt_prog_compiler_wl='-Wl,'
        lt_prog_compiler_pic='-KPIC'
        lt_prog_compiler_static='-static'
        ;;
      # icc used to be incompatible with GCC.
      # ICC 10 doesn't accept -KPIC any more.
      icc*)
        lt_prog_compiler_wl='-Wl,'
        lt_prog_compiler_pic='-fPIC'
        lt_prog_compiler_static='-static'
        ;;
      pgcc* | pgf77* | pgf90* | pgf95*)
        # Portland Group compilers (*not* the Pentium gcc compiler,
    # which looks to be a dead project)
    lt_prog_compiler_wl='-Wl,'
    lt_prog_compiler_pic='-fpic'
    lt_prog_compiler_static='-Bstatic'
        ;;
      ccc*)
        lt_prog_compiler_wl='-Wl,'
        # All Alpha code is PIC.
        lt_prog_compiler_static='-non_shared'
        ;;
      *)
        case `$CC -V 2>&1 | sed 5q` in
    *Sun\ C*)
      # Sun C 5.9
      lt_prog_compiler_pic='-KPIC'
      lt_prog_compiler_static='-Bstatic'
      lt_prog_compiler_wl='-Wl,'
      ;;
    *Sun\ F*)
      # Sun Fortran 8.3 passes all unrecognized flags to the linker
      lt_prog_compiler_pic='-KPIC'
      lt_prog_compiler_static='-Bstatic'
      lt_prog_compiler_wl=''
      ;;
    esac
    ;;
      esac
      ;;

    osf3* | osf4* | osf5*)
      lt_prog_compiler_wl='-Wl,'
      # All OSF/1 code is PIC.
      lt_prog_compiler_static='-non_shared'
      ;;

    rdos*)
      lt_prog_compiler_static='-non_shared'
      ;;

    solaris*)
      lt_prog_compiler_pic='-KPIC'
      lt_prog_compiler_static='-Bstatic'
      case $cc_basename in
      f77* | f90* | f95*)
    lt_prog_compiler_wl='-Qoption ld ';;
      *)
    lt_prog_compiler_wl='-Wl,';;
      esac
      ;;

    sunos4*)
      lt_prog_compiler_wl='-Qoption ld '
      lt_prog_compiler_pic='-PIC'
      lt_prog_compiler_static='-Bstatic'
      ;;

    sysv4 | sysv4.2uw2* | sysv4.3*)
      lt_prog_compiler_wl='-Wl,'
      lt_prog_compiler_pic='-KPIC'
      lt_prog_compiler_static='-Bstatic'
      ;;

    sysv4*MP*)
      if test -d /usr/nec ;then
    lt_prog_compiler_pic='-Kconform_pic'
    lt_prog_compiler_static='-Bstatic'
      fi
      ;;

    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
      lt_prog_compiler_wl='-Wl,'
      lt_prog_compiler_pic='-KPIC'
      lt_prog_compiler_static='-Bstatic'
      ;;

    unicos*)
      lt_prog_compiler_wl='-Wl,'
      lt_prog_compiler_can_build_shared=no
      ;;

    uts4*)
      lt_prog_compiler_pic='-pic'
      lt_prog_compiler_static='-Bstatic'
      ;;

    *)
      lt_prog_compiler_can_build_shared=no
      ;;
    esac
  fi

{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5
$as_echo "$lt_prog_compiler_pic" >&6; }

#
# Check to make sure the PIC flag actually works.
#
if test -n "$lt_prog_compiler_pic"; then

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
if ${lt_cv_prog_compiler_pic_works+:} false; then :
  $as_echo_n "(cached) " >&6
else
  lt_cv_prog_compiler_pic_works=no
  ac_outfile=conftest.$ac_objext
   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
   # Insert the option either (1) after the last *FLAGS variable, or
   # (2) before a word containing "conftest.", or (3) at the end.
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   # The option is referenced via a variable to avoid confusing sed.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"configure:8424: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>conftest.err)
   ac_status=$?
   cat conftest.err >&5
   echo "configure:8428: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s "$ac_outfile"; then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings other than the usual output.
     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
       lt_cv_prog_compiler_pic_works=yes
     fi
   fi
   $rm conftest*

fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }

if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
    case $lt_prog_compiler_pic in
     "" | " "*) ;;
     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
     esac
else
    lt_prog_compiler_pic=
     lt_prog_compiler_can_build_shared=no
fi

fi
case $host_os in
  # For platforms which do not support PIC, -DPIC is meaningless:
  *djgpp*)
    lt_prog_compiler_pic=
    ;;
  *)
    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
    ;;
esac

#
# Check to make sure the static flag actually works.
#
wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
if ${lt_cv_prog_compiler_static_works+:} false; then :
  $as_echo_n "(cached) " >&6
else
  lt_cv_prog_compiler_static_works=no
   save_LDFLAGS="$LDFLAGS"
   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
   echo "$lt_simple_link_test_code" > conftest.$ac_ext
   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
     # The linker can only warn and ignore the option if not recognized
     # So say no if there are warnings
     if test -s conftest.err; then
       # Append any errors to the config.log.
       cat conftest.err 1>&5
       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
       if diff conftest.exp conftest.er2 >/dev/null; then
         lt_cv_prog_compiler_static_works=yes
       fi
     else
       lt_cv_prog_compiler_static_works=yes
     fi
   fi
   $rm -r conftest*
   LDFLAGS="$save_LDFLAGS"

fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
$as_echo "$lt_cv_prog_compiler_static_works" >&6; }

if test x"$lt_cv_prog_compiler_static_works" = xyes; then
    :
else
    lt_prog_compiler_static=
fi

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
if ${lt_cv_prog_compiler_c_o+:} false; then :
  $as_echo_n "(cached) " >&6
else
  lt_cv_prog_compiler_c_o=no
   $rm -r conftest 2>/dev/null
   mkdir conftest
   cd conftest
   mkdir out
   echo "$lt_simple_compile_test_code" > conftest.$ac_ext

   lt_compiler_flag="-o out/conftest2.$ac_objext"
   # Insert the option either (1) after the last *FLAGS variable, or
   # (2) before a word containing "conftest.", or (3) at the end.
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"configure:8528: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>out/conftest.err)
   ac_status=$?
   cat out/conftest.err >&5
   echo "configure:8532: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s out/conftest2.$ac_objext
   then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
       lt_cv_prog_compiler_c_o=yes
     fi
   fi
   chmod u+w . 2>&5
   $rm conftest*
   # SGI C++ compiler will create directory out/ii_files/ for
   # template instantiation
   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
   $rm out/* && rmdir out
   cd ..
   rmdir conftest
   $rm conftest*

fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
$as_echo "$lt_cv_prog_compiler_c_o" >&6; }

hard_links="nottested"
if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
  # do not overwrite the value of need_locks provided by the user
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
$as_echo_n "checking if we can lock with hard links... " >&6; }
  hard_links=yes
  $rm conftest*
  ln conftest.a conftest.b 2>/dev/null && hard_links=no
  touch conftest.a
  ln conftest.a conftest.b 2>&5 || hard_links=no
  ln conftest.a conftest.b 2>/dev/null && hard_links=no
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
$as_echo "$hard_links" >&6; }
  if test "$hard_links" = no; then
    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5
$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;}
    need_locks=warn
  fi
else
  need_locks=no
fi

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }

  runpath_var=
  allow_undefined_flag=
  enable_shared_with_static_runtimes=no
  archive_cmds=
  archive_expsym_cmds=
  old_archive_From_new_cmds=
  old_archive_from_expsyms_cmds=
  export_dynamic_flag_spec=
  whole_archive_flag_spec=
  thread_safe_flag_spec=
  hardcode_libdir_flag_spec=
  hardcode_libdir_flag_spec_ld=
  hardcode_libdir_separator=
  hardcode_direct=no
  hardcode_minus_L=no
  hardcode_shlibpath_var=unsupported
  link_all_deplibs=unknown
  hardcode_automatic=no
  module_cmds=
  module_expsym_cmds=
  always_export_symbols=no
  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
  # include_expsyms should be a list of space-separated symbols to be *always*
  # included in the symbol list
  include_expsyms=
  # exclude_expsyms can be an extended regexp of symbols to exclude
  # it will be wrapped by ` (' and `)$', so one must not match beginning or
  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
  # as well as any symbol that contains `d'.
  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
  # platforms (ab)use it in PIC code, but their linkers get confused if
  # the symbol is explicitly referenced.  Since portable code cannot
  # rely on this symbol name, it's probably fine to never include it in
  # preloaded symbol tables.
  # Exclude shared library initialization/finalization symbols.
  extract_expsyms_cmds=
  # Just being paranoid about ensuring that cc_basename is set.
  for cc_temp in $compiler""; do
  case $cc_temp in
    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
    \-*) ;;
    *) break;;
  esac
done
cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`

  case $host_os in
  cygwin* | mingw* | pw32*)
    # FIXME: the MSVC++ port hasn't been tested in a loooong time
    # When not using gcc, we currently assume that we are using
    # Microsoft Visual C++.
    if test "$GCC" != yes; then
      with_gnu_ld=no
    fi
    ;;
  interix*)
    # we just hope/assume this is gcc and not c89 (= MSVC++)
    with_gnu_ld=yes
    ;;
  openbsd*)
    with_gnu_ld=no
    ;;
  esac

  ld_shlibs=yes
  if test "$with_gnu_ld" = yes; then
    # If archive_cmds runs LD, not CC, wlarc should be empty
    wlarc='${wl}'

    # Set some defaults for GNU ld with shared library support. These
    # are reset later if shared libraries are not supported. Putting them
    # here allows them to be overridden if necessary.
    runpath_var=LD_RUN_PATH
    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
    export_dynamic_flag_spec='${wl}--export-dynamic'
    # ancient GNU ld didn't support --whole-archive et. al.
    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
    whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
      else
    whole_archive_flag_spec=
    fi
    supports_anon_versioning=no
    case `$LD -v 2>/dev/null` in
      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
      *\ 2.11.*) ;; # other 2.11 versions
      *) supports_anon_versioning=yes ;;
    esac

    # See if GNU ld supports shared libraries.
    case $host_os in
    aix[3-9]*)
      # On AIX/PPC, the GNU linker is very broken
      if test "$host_cpu" != ia64; then
    ld_shlibs=no
    cat <<EOF 1>&2

*** Warning: the GNU linker, at least up to release 2.9.1, is reported
*** to be unable to reliably create shared libraries on AIX.
*** Therefore, libtool is disabling shared libraries support.  If you
*** really care for shared libraries, you may want to modify your PATH
*** so that a non-GNU linker is found, and then restart.

EOF
      fi
      ;;

    amigaos*)
      archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
      hardcode_libdir_flag_spec='-L$libdir'
      hardcode_minus_L=yes

      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
      # that the semantics of dynamic libraries on AmigaOS, at least up
      # to version 4, is to share data among multiple programs linked
      # with the same dynamic library.  Since this doesn't match the
      # behavior of shared libraries on other platforms, we can't use
      # them.
      ld_shlibs=no
      ;;

    beos*)
      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
    allow_undefined_flag=unsupported
    # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
    # support --undefined.  This deserves some investigation.  FIXME
    archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
      else
    ld_shlibs=no
      fi
      ;;

    cygwin* | mingw* | pw32*)
      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
      # as there is no search path for DLLs.
      hardcode_libdir_flag_spec='-L$libdir'
      allow_undefined_flag=unsupported
      always_export_symbols=no
      enable_shared_with_static_runtimes=yes
      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'

      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
    # If the export-symbols file already is a .def file (1st line
    # is EXPORTS), use it as is; otherwise, prepend...
    archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
      cp $export_symbols $output_objdir/$soname.def;
    else
      echo EXPORTS > $output_objdir/$soname.def;
      cat $export_symbols >> $output_objdir/$soname.def;
    fi~
    $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
      else
    ld_shlibs=no
      fi
      ;;

    interix[3-9]*)
      hardcode_direct=no
      hardcode_shlibpath_var=no
      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
      export_dynamic_flag_spec='${wl}-E'
      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
      # Instead, shared libraries are loaded at an image base (0x10000000 by
      # default) and relocated if they conflict, which is a slow very memory
      # consuming and fragmenting process.  To avoid this, we pick a random,
      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
      ;;

    gnu* | linux* | k*bsd*-gnu)
      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
    tmp_addflag=
    case $cc_basename,$host_cpu in
    pgcc*)              # Portland Group C compiler
      whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
      tmp_addflag=' $pic_flag'
      ;;
    pgf77* | pgf90* | pgf95*)   # Portland Group f77 and f90 compilers
      whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
      tmp_addflag=' $pic_flag -Mnomain' ;;
    ecc*,ia64* | icc*,ia64*)        # Intel C compiler on ia64
      tmp_addflag=' -i_dynamic' ;;
    efc*,ia64* | ifort*,ia64*)  # Intel Fortran compiler on ia64
      tmp_addflag=' -i_dynamic -nofor_main' ;;
    ifc* | ifort*)          # Intel Fortran compiler
      tmp_addflag=' -nofor_main' ;;
    esac
    case `$CC -V 2>&1 | sed 5q` in
    *Sun\ C*)           # Sun C 5.9
      whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
      tmp_sharedflag='-G' ;;
    *Sun\ F*)           # Sun Fortran 8.3
      tmp_sharedflag='-G' ;;
    *)
      tmp_sharedflag='-shared' ;;
    esac
    archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'

    if test $supports_anon_versioning = yes; then
      archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
  $echo "local: *; };" >> $output_objdir/$libname.ver~
      $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
    fi
      else
    ld_shlibs=no
      fi
      ;;

    netbsd*)
      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
    archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
    wlarc=
      else
    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
      fi
      ;;

    solaris*)
      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
    ld_shlibs=no
    cat <<EOF 1>&2

*** Warning: The releases 2.8.* of the GNU linker cannot reliably
*** create shared libraries on Solaris systems.  Therefore, libtool
*** is disabling shared libraries support.  We urge you to upgrade GNU
*** binutils to release 2.9.1 or newer.  Another option is to modify
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.

EOF
      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
      else
    ld_shlibs=no
      fi
      ;;

    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
      case `$LD -v 2>&1` in
        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
    ld_shlibs=no
    cat <<_LT_EOF 1>&2

*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
*** reliably create shared libraries on SCO systems.  Therefore, libtool
*** is disabling shared libraries support.  We urge you to upgrade GNU
*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.

_LT_EOF
    ;;
    *)
      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
        hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
        archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
      else
        ld_shlibs=no
      fi
    ;;
      esac
      ;;

    sunos4*)
      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
      wlarc=
      hardcode_direct=yes
      hardcode_shlibpath_var=no
      ;;

    *)
      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
      else
    ld_shlibs=no
      fi
      ;;
    esac

    if test "$ld_shlibs" = no; then
      runpath_var=
      hardcode_libdir_flag_spec=
      export_dynamic_flag_spec=
      whole_archive_flag_spec=
    fi
  else
    # PORTME fill in a description of your system's linker (not GNU ld)
    case $host_os in
    aix3*)
      allow_undefined_flag=unsupported
      always_export_symbols=yes
      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
      # Note: this linker hardcodes the directories in LIBPATH if there
      # are no directories specified by -L.
      hardcode_minus_L=yes
      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
    # Neither direct hardcoding nor static linking is supported with a
    # broken collect2.
    hardcode_direct=unsupported
      fi
      ;;

    aix[4-9]*)
      if test "$host_cpu" = ia64; then
    # On IA64, the linker does run time linking by default, so we don't
    # have to do anything special.
    aix_use_runtimelinking=no
    exp_sym_flag='-Bexport'
    no_entry_flag=""
      else
    # If we're using GNU nm, then we don't want the "-C" option.
    # -C means demangle to AIX nm, but means don't demangle with GNU nm
    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
      export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
    else
      export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
    fi
    aix_use_runtimelinking=no

    # Test if we are trying to use run time linking or normal
    # AIX style linking. If -brtl is somewhere in LDFLAGS, we
    # need to do runtime linking.
    case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
      for ld_flag in $LDFLAGS; do
      if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
        aix_use_runtimelinking=yes
        break
      fi
      done
      ;;
    esac

    exp_sym_flag='-bexport'
    no_entry_flag='-bnoentry'
      fi

      # When large executables or shared objects are built, AIX ld can
      # have problems creating the table of contents.  If linking a library
      # or program results in "error TOC overflow" add -mminimal-toc to
      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.

      archive_cmds=''
      hardcode_direct=yes
      hardcode_libdir_separator=':'
      link_all_deplibs=yes

      if test "$GCC" = yes; then
    case $host_os in aix4.[012]|aix4.[012].*)
    # We only want to do this on AIX 4.2 and lower, the check
    # below for broken collect2 doesn't work under 4.3+
      collect2name=`${CC} -print-prog-name=collect2`
      if test -f "$collect2name" && \
       strings "$collect2name" | grep resolve_lib_name >/dev/null
      then
      # We have reworked collect2
      :
      else
      # We have old collect2
      hardcode_direct=unsupported
      # It fails to find uninstalled libraries when the uninstalled
      # path is not listed in the libpath.  Setting hardcode_minus_L
      # to unsupported forces relinking
      hardcode_minus_L=yes
      hardcode_libdir_flag_spec='-L$libdir'
      hardcode_libdir_separator=
      fi
      ;;
    esac
    shared_flag='-shared'
    if test "$aix_use_runtimelinking" = yes; then
      shared_flag="$shared_flag "'${wl}-G'
    fi
      else
    # not using gcc
    if test "$host_cpu" = ia64; then
    # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
    # chokes on -Wl,-G. The following line is correct:
      shared_flag='-G'
    else
      if test "$aix_use_runtimelinking" = yes; then
        shared_flag='${wl}-G'
      else
        shared_flag='${wl}-bM:SRE'
      fi
    fi
      fi

      # It seems that -bexpall does not export symbols beginning with
      # underscore (_), so it is better to generate a list of symbols to export.
      always_export_symbols=yes
      if test "$aix_use_runtimelinking" = yes; then
    # Warning - without using the other runtime loading flags (-brtl),
    # -berok will link without error, but may produce a broken library.
    allow_undefined_flag='-berok'
       # Determine the default libpath from the value encoded in an empty executable.

cat > conftest.$ac_ext <<EOF
#line 8992 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; } && test -s conftest${ac_exeext}; then

lt_aix_libpath_sed='
    /Import File Strings/,/^$/ {
    /^0/ {
        s/^0  *\(.*\)$/\1/
        p
    }
    }'
aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
# Check for a 64-bit object if we didn't find anything.
if test -z "$aix_libpath"; then
  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
fi
  rm -rf conftest*
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&6
fi
rm -f conftest*
if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi

       hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
    archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
       else
    if test "$host_cpu" = ia64; then
      hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
      allow_undefined_flag="-z nodefs"
      archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
    else
     # Determine the default libpath from the value encoded in an empty executable.

cat > conftest.$ac_ext <<EOF
#line 9034 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; } && test -s conftest${ac_exeext}; then

lt_aix_libpath_sed='
    /Import File Strings/,/^$/ {
    /^0/ {
        s/^0  *\(.*\)$/\1/
        p
    }
    }'
aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
# Check for a 64-bit object if we didn't find anything.
if test -z "$aix_libpath"; then
  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
fi
  rm -rf conftest*
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&6
fi
rm -f conftest*
if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi

     hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
      # Warning - without using the other run time loading flags,
      # -berok will link without error, but may produce a broken library.
      no_undefined_flag=' ${wl}-bernotok'
      allow_undefined_flag=' ${wl}-berok'
      # Exported symbols can be pulled into shared objects from archives
      whole_archive_flag_spec='$convenience'
      archive_cmds_need_lc=yes
      # This is similar to how AIX traditionally builds its shared libraries.
      archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
    fi
      fi
      ;;

    amigaos*)
      archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
      hardcode_libdir_flag_spec='-L$libdir'
      hardcode_minus_L=yes
      # see comment about different semantics on the GNU ld section
      ld_shlibs=no
      ;;

    bsdi[45]*)
      export_dynamic_flag_spec=-rdynamic
      ;;

    cygwin* | mingw* | pw32*)
      # When not using gcc, we currently assume that we are using
      # Microsoft Visual C++.
      # hardcode_libdir_flag_spec is actually meaningless, as there is
      # no search path for DLLs.
      hardcode_libdir_flag_spec=' '
      allow_undefined_flag=unsupported
      # Tell ltmain to make .lib files, not .a files.
      libext=lib
      # Tell ltmain to make .dll files, not .so files.
      shrext_cmds=".dll"
      # FIXME: Setting linknames here is a bad hack.
      archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
      # The linker will automatically build a .lib file if we build a DLL.
      old_archive_From_new_cmds='true'
      # FIXME: Should let the user specify the lib program.
      old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
      fix_srcfile_path='`cygpath -w "$srcfile"`'
      enable_shared_with_static_runtimes=yes
      ;;

    darwin* | rhapsody*)
      case $host_os in
        rhapsody* | darwin1.[012])
         allow_undefined_flag='${wl}-undefined ${wl}suppress'
         ;;
       *) # Darwin 1.3 on
         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
           allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
         else
           case ${MACOSX_DEPLOYMENT_TARGET} in
             10.[012])
               allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
               ;;
             *)
               allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup'
               ;;
           esac
         fi
         ;;
      esac
      archive_cmds_need_lc=no
      hardcode_direct=no
      hardcode_automatic=yes
      hardcode_shlibpath_var=unsupported
      whole_archive_flag_spec=''
      link_all_deplibs=yes
    if test "$GCC" = yes ; then
        output_verbose_link_cmd='echo'
        archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
        module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
        archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
        module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
    else
      case $cc_basename in
        xlc*)
         output_verbose_link_cmd='echo'
         archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
         module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
         archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
          module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
          ;;
       *)
         ld_shlibs=no
          ;;
      esac
    fi
      ;;

    dgux*)
      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
      hardcode_libdir_flag_spec='-L$libdir'
      hardcode_shlibpath_var=no
      ;;

    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
    # support.  Future versions do this automatically, but an explicit c++rt0.o
    # does not break anything, and helps significantly (at the cost of a little
    # extra space).
    freebsd2.2*)
      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
      hardcode_libdir_flag_spec='-R$libdir'
      hardcode_direct=yes
      hardcode_shlibpath_var=no
      ;;

    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
    freebsd2*)
      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
      hardcode_direct=yes
      hardcode_minus_L=yes
      hardcode_shlibpath_var=no
      ;;

    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
    freebsd* | dragonfly*)
      archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
      hardcode_libdir_flag_spec='-R$libdir'
      hardcode_direct=yes
      hardcode_shlibpath_var=no
      ;;

    hpux9*)
      if test "$GCC" = yes; then
    archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
      else
    archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
      fi
      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
      hardcode_libdir_separator=:
      hardcode_direct=yes

      # hardcode_minus_L: Not really in the search PATH,
      # but as the default location of the library.
      hardcode_minus_L=yes
      export_dynamic_flag_spec='${wl}-E'
      ;;

    hpux10*)
      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
    archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
      else
    archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
      fi
      if test "$with_gnu_ld" = no; then
    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
    hardcode_libdir_separator=:

    hardcode_direct=yes
    export_dynamic_flag_spec='${wl}-E'

    # hardcode_minus_L: Not really in the search PATH,
    # but as the default location of the library.
    hardcode_minus_L=yes
      fi
      ;;

    hpux11*)
      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
    case $host_cpu in
    hppa*64*)
      archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
      ;;
    ia64*)
      archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
      ;;
    *)
      archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
      ;;
    esac
      else
    case $host_cpu in
    hppa*64*)
      archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
      ;;
    ia64*)
      archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
      ;;
    *)
      archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
      ;;
    esac
      fi
      if test "$with_gnu_ld" = no; then
    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
    hardcode_libdir_separator=:

    case $host_cpu in
    hppa*64*|ia64*)
      hardcode_libdir_flag_spec_ld='+b $libdir'
      hardcode_direct=no
      hardcode_shlibpath_var=no
      ;;
    *)
      hardcode_direct=yes
      export_dynamic_flag_spec='${wl}-E'

      # hardcode_minus_L: Not really in the search PATH,
      # but as the default location of the library.
      hardcode_minus_L=yes
      ;;
    esac
      fi
      ;;

    irix5* | irix6* | nonstopux*)
      if test "$GCC" = yes; then
    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
      else
    archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
    hardcode_libdir_flag_spec_ld='-rpath $libdir'
      fi
      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
      hardcode_libdir_separator=:
      link_all_deplibs=yes
      ;;

    netbsd*)
      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
      else
    archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
      fi
      hardcode_libdir_flag_spec='-R$libdir'
      hardcode_direct=yes
      hardcode_shlibpath_var=no
      ;;

    newsos6)
      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
      hardcode_direct=yes
      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
      hardcode_libdir_separator=:
      hardcode_shlibpath_var=no
      ;;

    openbsd*)
      if test -f /usr/libexec/ld.so; then
    hardcode_direct=yes
    hardcode_shlibpath_var=no
    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
      archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
      export_dynamic_flag_spec='${wl}-E'
    else
      case $host_os in
       openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
         archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
         hardcode_libdir_flag_spec='-R$libdir'
         ;;
       *)
         archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
         hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
         ;;
      esac
        fi
      else
    ld_shlibs=no
      fi
      ;;

    os2*)
      hardcode_libdir_flag_spec='-L$libdir'
      hardcode_minus_L=yes
      allow_undefined_flag=unsupported
      archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
      old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
      ;;

    osf3*)
      if test "$GCC" = yes; then
    allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
    archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
      else
    allow_undefined_flag=' -expect_unresolved \*'
    archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
      fi
      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
      hardcode_libdir_separator=:
      ;;

    osf4* | osf5*)  # as osf3* with the addition of -msym flag
      if test "$GCC" = yes; then
    allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
    archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
      else
    allow_undefined_flag=' -expect_unresolved \*'
    archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
    archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
    $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'

    # Both c and cxx compiler support -rpath directly
    hardcode_libdir_flag_spec='-rpath $libdir'
      fi
      hardcode_libdir_separator=:
      ;;

    solaris*)
      no_undefined_flag=' -z text'
      if test "$GCC" = yes; then
    wlarc='${wl}'
    archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
      $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
      else
    wlarc=''
    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
    $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
      fi
      hardcode_libdir_flag_spec='-R$libdir'
      hardcode_shlibpath_var=no
      case $host_os in
      solaris2.[0-5] | solaris2.[0-5].*) ;;
      *)
    # The compiler driver will combine and reorder linker options,
    # but understands `-z linker_flag'.  GCC discards it without `$wl',
    # but is careful enough not to reorder.
    # Supported since Solaris 2.6 (maybe 2.5.1?)
    if test "$GCC" = yes; then
      whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
    else
      whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
    fi
    ;;
      esac
      link_all_deplibs=yes
      ;;

    sunos4*)
      if test "x$host_vendor" = xsequent; then
    # Use $CC to link under sequent, because it throws in some extra .o
    # files that make .init and .fini sections work.
    archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
      else
    archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
      fi
      hardcode_libdir_flag_spec='-L$libdir'
      hardcode_direct=yes
      hardcode_minus_L=yes
      hardcode_shlibpath_var=no
      ;;

    sysv4)
      case $host_vendor in
    sni)
      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
      hardcode_direct=yes # is this really true???
    ;;
    siemens)
      ## LD is ld it makes a PLAMLIB
      ## CC just makes a GrossModule.
      archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
      reload_cmds='$CC -r -o $output$reload_objs'
      hardcode_direct=no
        ;;
    motorola)
      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
      hardcode_direct=no #Motorola manual says yes, but my tests say they lie
    ;;
      esac
      runpath_var='LD_RUN_PATH'
      hardcode_shlibpath_var=no
      ;;

    sysv4.3*)
      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
      hardcode_shlibpath_var=no
      export_dynamic_flag_spec='-Bexport'
      ;;

    sysv4*MP*)
      if test -d /usr/nec; then
    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
    hardcode_shlibpath_var=no
    runpath_var=LD_RUN_PATH
    hardcode_runpath_var=yes
    ld_shlibs=yes
      fi
      ;;

    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
      no_undefined_flag='${wl}-z,text'
      archive_cmds_need_lc=no
      hardcode_shlibpath_var=no
      runpath_var='LD_RUN_PATH'

      if test "$GCC" = yes; then
    archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
    archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
      else
    archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
    archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
      fi
      ;;

    sysv5* | sco3.2v5* | sco5v6*)
      # Note: We can NOT use -z defs as we might desire, because we do not
      # link with -lc, and that would cause any symbols used from libc to
      # always be unresolved, which means just about no library would
      # ever link correctly.  If we're not using GNU ld we use -z text
      # though, which does catch some bad symbols but isn't as heavy-handed
      # as -z defs.
      no_undefined_flag='${wl}-z,text'
      allow_undefined_flag='${wl}-z,nodefs'
      archive_cmds_need_lc=no
      hardcode_shlibpath_var=no
      hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
      hardcode_libdir_separator=':'
      link_all_deplibs=yes
      export_dynamic_flag_spec='${wl}-Bexport'
      runpath_var='LD_RUN_PATH'

      if test "$GCC" = yes; then
    archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
    archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
      else
    archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
    archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
      fi
      ;;

    uts4*)
      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
      hardcode_libdir_flag_spec='-L$libdir'
      hardcode_shlibpath_var=no
      ;;

    *)
      ld_shlibs=no
      ;;
    esac
  fi

{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
$as_echo "$ld_shlibs" >&6; }
test "$ld_shlibs" = no && can_build_shared=no

#
# Do we need to explicitly link libc?
#
case "x$archive_cmds_need_lc" in
x|xyes)
  # Assume -lc should be added
  archive_cmds_need_lc=yes

  if test "$enable_shared" = yes && test "$GCC" = yes; then
    case $archive_cmds in
    *'~'*)
      # FIXME: we may have to deal with multi-command sequences.
      ;;
    '$CC '*)
      # Test whether the compiler implicitly links with -lc since on some
      # systems, -lgcc has to come before -lc. If gcc already passes -lc
      # to ld, don't add -lc before -lgcc.
      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
      $rm conftest*
      echo "$lt_simple_compile_test_code" > conftest.$ac_ext

      if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; } 2>conftest.err; then
        soname=conftest
        lib=conftest
        libobjs=conftest.$ac_objext
        deplibs=
        wl=$lt_prog_compiler_wl
    pic_flag=$lt_prog_compiler_pic
        compiler_flags=-v
        linker_flags=-v
        verstring=
        output_objdir=.
        libname=conftest
        lt_save_allow_undefined_flag=$allow_undefined_flag
        allow_undefined_flag=
        if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\""; } >&5
  (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; }
        then
      archive_cmds_need_lc=no
        else
      archive_cmds_need_lc=yes
        fi
        allow_undefined_flag=$lt_save_allow_undefined_flag
      else
        cat conftest.err 1>&5
      fi
      $rm conftest*
      { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc" >&5
$as_echo "$archive_cmds_need_lc" >&6; }
      ;;
    esac
  fi
  ;;
esac

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
$as_echo_n "checking dynamic linker characteristics... " >&6; }
library_names_spec=
libname_spec='lib$name'
soname_spec=
shrext_cmds=".so"
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
finish_eval=
shlibpath_var=
shlibpath_overrides_runpath=unknown
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"

if test "$GCC" = yes; then
  case $host_os in
    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
    *) lt_awk_arg="/^libraries:/" ;;
  esac
  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
  if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
    # if the path contains ";" then we assume it to be the separator
    # otherwise default to the standard path separator (i.e. ":") - it is
    # assumed that no part of a normal pathname contains ";" but that should
    # okay in the real world where ";" in dirpaths is itself problematic.
    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
  else
    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
  fi
  # Ok, now we have the path, separated by spaces, we can step through it
  # and add multilib dir if necessary.
  lt_tmp_lt_search_path_spec=
  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
  for lt_sys_path in $lt_search_path_spec; do
    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
    else
      test -d "$lt_sys_path" && \
    lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
    fi
  done
  lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
BEGIN {RS=" "; FS="/|\n";} {
  lt_foo="";
  lt_count=0;
  for (lt_i = NF; lt_i > 0; lt_i--) {
    if ($lt_i != "" && $lt_i != ".") {
      if ($lt_i == "..") {
        lt_count++;
      } else {
        if (lt_count == 0) {
          lt_foo="/" $lt_i lt_foo;
        } else {
          lt_count--;
        }
      }
    }
  }
  if (lt_foo != "") { lt_freq[lt_foo]++; }
  if (lt_freq[lt_foo] == 1) { print lt_foo; }
}'`
  sys_lib_search_path_spec=`echo $lt_search_path_spec`
else
  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
fi
need_lib_prefix=unknown
hardcode_into_libs=no

# when you set need_version to no, make sure it does not cause -set_version
# flags to be left without arguments
need_version=unknown

case $host_os in
aix3*)
  version_type=linux
  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
  shlibpath_var=LIBPATH

  # AIX 3 has no versioning support, so we append a major version to the name.
  soname_spec='${libname}${release}${shared_ext}$major'
  ;;

aix[4-9]*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  hardcode_into_libs=yes
  if test "$host_cpu" = ia64; then
    # AIX 5 supports IA64
    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
    shlibpath_var=LD_LIBRARY_PATH
  else
    # With GCC up to 2.95.x, collect2 would create an import file
    # for dependence libraries.  The import file would start with
    # the line `#! .'.  This would cause the generated library to
    # depend on `.', always an invalid library.  This was fixed in
    # development snapshots of GCC prior to 3.0.
    case $host_os in
      aix4 | aix4.[01] | aix4.[01].*)
      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
       echo ' yes '
       echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
    :
      else
    can_build_shared=no
      fi
      ;;
    esac
    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
    # soname into executable. Probably we can add versioning support to
    # collect2, so additional links can be useful in future.
    if test "$aix_use_runtimelinking" = yes; then
      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
      # instead of lib<name>.a to let people know that these are not
      # typical AIX shared libraries.
      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
    else
      # We preserve .a as extension for shared libraries through AIX4.2
      # and later when we are not doing run time linking.
      library_names_spec='${libname}${release}.a $libname.a'
      soname_spec='${libname}${release}${shared_ext}$major'
    fi
    shlibpath_var=LIBPATH
  fi
  ;;

amigaos*)
  library_names_spec='$libname.ixlibrary $libname.a'
  # Create ${libname}_ixlibrary.a entries in /sys/libs.
  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
  ;;

beos*)
  library_names_spec='${libname}${shared_ext}'
  dynamic_linker="$host_os ld.so"
  shlibpath_var=LIBRARY_PATH
  ;;

haiku*)
  # Since haiku provides gcc, use GNU style here
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
  soname_spec='${libname}${release}${shared_ext}$major'
  shlibpath_var=LIBRARY_PATH
  hardcode_into_libs=yes
  ;;

bsdi[45]*)
  version_type=linux
  need_version=no
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
  soname_spec='${libname}${release}${shared_ext}$major'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
  # the default ld.so.conf also contains /usr/contrib/lib and
  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
  # libtool to hard-code these into programs
  ;;

cygwin* | mingw* | pw32*)
  version_type=windows
  shrext_cmds=".dll"
  need_version=no
  need_lib_prefix=no

  case $GCC,$host_os in
  yes,cygwin* | yes,mingw* | yes,pw32*)
    library_names_spec='$libname.dll.a'
    # DLL is installed to $(libdir)/../bin by postinstall_cmds
    postinstall_cmds='base_file=`basename \${file}`~
      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
      dldir=$destdir/`dirname \$dlpath`~
      test -d \$dldir || mkdir -p \$dldir~
      $install_prog $dir/$dlname \$dldir/$dlname~
      chmod a+x \$dldir/$dlname'
    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
      dlpath=$dir/\$dldll~
       $rm \$dlpath'
    shlibpath_overrides_runpath=yes

    case $host_os in
    cygwin*)
      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
      ;;
    mingw*)
      # MinGW DLLs use traditional 'lib' prefix
      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
        # It is most probably a Windows format PATH printed by
        # mingw gcc, but we are running on Cygwin. Gcc prints its search
        # path with ; separators, and with drive letters. We can handle the
        # drive letters (cygwin fileutils understands them), so leave them,
        # especially as we might pass files found there to a mingw objdump,
        # which wouldn't understand a cygwinified path. Ahh.
        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
      else
        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
      fi
      ;;
    pw32*)
      # pw32 DLLs use 'pw' prefix rather than 'lib'
      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
      ;;
    esac
    ;;

  *)
    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
    ;;
  esac
  dynamic_linker='Win32 ld.exe'
  # FIXME: first we should search . and the directory the executable is in
  shlibpath_var=PATH
  ;;

darwin* | rhapsody*)
  dynamic_linker="$host_os dyld"
  version_type=darwin
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
  soname_spec='${libname}${release}${major}$shared_ext'
  shlibpath_overrides_runpath=yes
  shlibpath_var=DYLD_LIBRARY_PATH
  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'

  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
  ;;

dgux*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
  soname_spec='${libname}${release}${shared_ext}$major'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

freebsd* | dragonfly*)
  # DragonFly does not have aout.  When/if they implement a new
  # versioning mechanism, adjust this.
  if test -x /usr/bin/objformat; then
    objformat=`/usr/bin/objformat`
  else
    case $host_os in
    freebsd[123].*) objformat=aout ;;
    *) objformat=elf ;;
    esac
  fi
  version_type=freebsd-$objformat
  case $version_type in
    freebsd-elf*)
      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
      need_version=no
      need_lib_prefix=no
      ;;
    freebsd-*)
      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
      need_version=yes
      ;;
  esac
  shlibpath_var=LD_LIBRARY_PATH
  case $host_os in
  freebsd2*)
    shlibpath_overrides_runpath=yes
    ;;
  freebsd3.[01]* | freebsdelf3.[01]*)
    shlibpath_overrides_runpath=yes
    hardcode_into_libs=yes
    ;;
  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
    shlibpath_overrides_runpath=no
    hardcode_into_libs=yes
    ;;
  *) # from 4.6 on, and DragonFly
    shlibpath_overrides_runpath=yes
    hardcode_into_libs=yes
    ;;
  esac
  ;;

gnu*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
  soname_spec='${libname}${release}${shared_ext}$major'
  shlibpath_var=LD_LIBRARY_PATH
  hardcode_into_libs=yes
  ;;

hpux9* | hpux10* | hpux11*)
  # Give a soname corresponding to the major version so that dld.sl refuses to
  # link against other versions.
  version_type=sunos
  need_lib_prefix=no
  need_version=no
  case $host_cpu in
  ia64*)
    shrext_cmds='.so'
    hardcode_into_libs=yes
    dynamic_linker="$host_os dld.so"
    shlibpath_var=LD_LIBRARY_PATH
    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
    soname_spec='${libname}${release}${shared_ext}$major'
    if test "X$HPUX_IA64_MODE" = X32; then
      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
    else
      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
    fi
    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
    ;;
   hppa*64*)
     shrext_cmds='.sl'
     hardcode_into_libs=yes
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
     soname_spec='${libname}${release}${shared_ext}$major'
     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
   *)
    shrext_cmds='.sl'
    dynamic_linker="$host_os dld.sl"
    shlibpath_var=SHLIB_PATH
    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
    soname_spec='${libname}${release}${shared_ext}$major'
    ;;
  esac
  # HP-UX runs *really* slowly unless shared libraries are mode 555.
  postinstall_cmds='chmod 555 $lib'
  ;;

interix[3-9]*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
  soname_spec='${libname}${release}${shared_ext}$major'
  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=no
  hardcode_into_libs=yes
  ;;

irix5* | irix6* | nonstopux*)
  case $host_os in
    nonstopux*) version_type=nonstopux ;;
    *)
    if test "$lt_cv_prog_gnu_ld" = yes; then
        version_type=linux
    else
        version_type=irix
    fi ;;
  esac
  need_lib_prefix=no
  need_version=no
  soname_spec='${libname}${release}${shared_ext}$major'
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
  case $host_os in
  irix5* | nonstopux*)
    libsuff= shlibsuff=
    ;;
  *)
    case $LD in # libtool.m4 will add one of these switches to LD
    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
      libsuff= shlibsuff= libmagic=32-bit;;
    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
      libsuff=32 shlibsuff=N32 libmagic=N32;;
    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
      libsuff=64 shlibsuff=64 libmagic=64-bit;;
    *) libsuff= shlibsuff= libmagic=never-match;;
    esac
    ;;
  esac
  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
  shlibpath_overrides_runpath=no
  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
  hardcode_into_libs=yes
  ;;

# No shared lib support for Linux oldld, aout, or coff.
linux*oldld* | linux*aout* | linux*coff*)
  dynamic_linker=no
  ;;

# This must be Linux ELF.
linux* | k*bsd*-gnu)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
  soname_spec='${libname}${release}${shared_ext}$major'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=no
  # This implies no fast_install, which is unacceptable.
  # Some rework will be needed to allow for fast_install
  # before this can be enabled.
  hardcode_into_libs=yes

  # Append ld.so.conf contents to the search path
  if test -f /etc/ld.so.conf; then
    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[  ]*hwcap[    ]/d;s/[:,   ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
  fi

  # We used to test for /lib/ld.so.1 and disable shared libraries on
  # powerpc, because MkLinux only supported shared libraries with the
  # GNU dynamic linker.  Since this was broken with cross compilers,
  # most powerpc-linux boxes support dynamic linking these days and
  # people can always --disable-shared, the test was removed, and we
  # assume the GNU/Linux dynamic linker is in use.
  dynamic_linker='GNU/Linux ld.so'
  ;;

netbsd*)
  version_type=sunos
  need_lib_prefix=no
  need_version=no
  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
    dynamic_linker='NetBSD (a.out) ld.so'
  else
    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
    soname_spec='${libname}${release}${shared_ext}$major'
    dynamic_linker='NetBSD ld.elf_so'
  fi
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  hardcode_into_libs=yes
  ;;

newsos6)
  version_type=linux
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  ;;

nto-qnx*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
  soname_spec='${libname}${release}${shared_ext}$major'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  ;;

openbsd*)
  version_type=sunos
  sys_lib_dlsearch_path_spec="/usr/lib"
  need_lib_prefix=no
  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
  case $host_os in
    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
    *)                         need_version=no  ;;
  esac
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
    case $host_os in
      openbsd2.[89] | openbsd2.[89].*)
    shlibpath_overrides_runpath=no
    ;;
      *)
    shlibpath_overrides_runpath=yes
    ;;
      esac
  else
    shlibpath_overrides_runpath=yes
  fi
  ;;

os2*)
  libname_spec='$name'
  shrext_cmds=".dll"
  need_lib_prefix=no
  library_names_spec='$libname${shared_ext} $libname.a'
  dynamic_linker='OS/2 ld.exe'
  shlibpath_var=LIBPATH
  ;;

osf3* | osf4* | osf5*)
  version_type=osf
  need_lib_prefix=no
  need_version=no
  soname_spec='${libname}${release}${shared_ext}$major'
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
  shlibpath_var=LD_LIBRARY_PATH
  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
  ;;

rdos*)
  dynamic_linker=no
  ;;

solaris*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
  soname_spec='${libname}${release}${shared_ext}$major'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  hardcode_into_libs=yes
  # ldd complains unless libraries are executable
  postinstall_cmds='chmod +x $lib'
  ;;

sunos4*)
  version_type=sunos
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  if test "$with_gnu_ld" = yes; then
    need_lib_prefix=no
  fi
  need_version=yes
  ;;

sysv4 | sysv4.3*)
  version_type=linux
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
  soname_spec='${libname}${release}${shared_ext}$major'
  shlibpath_var=LD_LIBRARY_PATH
  case $host_vendor in
    sni)
      shlibpath_overrides_runpath=no
      need_lib_prefix=no
      export_dynamic_flag_spec='${wl}-Blargedynsym'
      runpath_var=LD_RUN_PATH
      ;;
    siemens)
      need_lib_prefix=no
      ;;
    motorola)
      need_lib_prefix=no
      need_version=no
      shlibpath_overrides_runpath=no
      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
      ;;
  esac
  ;;

sysv4*MP*)
  if test -d /usr/nec ;then
    version_type=linux
    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
    soname_spec='$libname${shared_ext}.$major'
    shlibpath_var=LD_LIBRARY_PATH
  fi
  ;;

sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
  version_type=freebsd-elf
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
  soname_spec='${libname}${release}${shared_ext}$major'
  shlibpath_var=LD_LIBRARY_PATH
  hardcode_into_libs=yes
  if test "$with_gnu_ld" = yes; then
    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
    shlibpath_overrides_runpath=no
  else
    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
    shlibpath_overrides_runpath=yes
    case $host_os in
      sco3.2v5*)
        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
    ;;
    esac
  fi
  sys_lib_dlsearch_path_spec='/usr/lib'
  ;;

uts4*)
  version_type=linux
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
  soname_spec='${libname}${release}${shared_ext}$major'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

*)
  dynamic_linker=no
  ;;
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
$as_echo "$dynamic_linker" >&6; }
test "$dynamic_linker" = no && can_build_shared=no

if ${lt_cv_sys_lib_search_path_spec+:} false; then :
  $as_echo_n "(cached) " >&6
else
  lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
fi

sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
if ${lt_cv_sys_lib_dlsearch_path_spec+:} false; then :
  $as_echo_n "(cached) " >&6
else
  lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
fi

sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"

variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
if test "$GCC" = yes; then
  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
hardcode_action=
if test -n "$hardcode_libdir_flag_spec" || \
   test -n "$runpath_var" || \
   test "X$hardcode_automatic" = "Xyes" ; then

  # We can hardcode non-existent directories.
  if test "$hardcode_direct" != no &&
     # If the only mechanism to avoid hardcoding is shlibpath_var, we
     # have to relink, otherwise we might link with an installed library
     # when we should be linking with a yet-to-be-installed one
     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no &&
     test "$hardcode_minus_L" != no; then
    # Linking always hardcodes the temporary library directory.
    hardcode_action=relink
  else
    # We can link without hardcoding, and we can hardcode nonexisting dirs.
    hardcode_action=immediate
  fi
else
  # We cannot hardcode anything, or else we can only hardcode existing
  # directories.
  hardcode_action=unsupported
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
$as_echo "$hardcode_action" >&6; }

if test "$hardcode_action" = relink; then
  # Fast installation is not supported
  enable_fast_install=no
elif test "$shlibpath_overrides_runpath" = yes ||
     test "$enable_shared" = no; then
  # Fast installation is not necessary
  enable_fast_install=needless
fi

striplib=
old_striplib=
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
$as_echo_n "checking whether stripping libraries is possible... " >&6; }
if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
else
# FIXME - insert some real tests, host_os isn't really good enough
  case $host_os in
   darwin*)
       if test -n "$STRIP" ; then
         striplib="$STRIP -x"
         old_striplib="$STRIP -S"
         { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
       else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
       ;;
   *)
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
    ;;
  esac
fi

if test "x$enable_dlopen" != xyes; then
  enable_dlopen=unknown
  enable_dlopen_self=unknown
  enable_dlopen_self_static=unknown
else
  lt_cv_dlopen=no
  lt_cv_dlopen_libs=

  case $host_os in
  beos* | haiku*)
    lt_cv_dlopen="load_add_on"
    lt_cv_dlopen_libs=
    lt_cv_dlopen_self=yes
    ;;

  mingw* | pw32*)
    lt_cv_dlopen="LoadLibrary"
    lt_cv_dlopen_libs=
   ;;

  cygwin*)
    lt_cv_dlopen="dlopen"
    lt_cv_dlopen_libs=
   ;;

  darwin*)
  # if libdl is installed we need to link against it
    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
$as_echo_n "checking for dlopen in -ldl... " >&6; }
if ${ac_cv_lib_dl_dlopen+:} false; then :
  $as_echo_n "(cached) " >&6
else
  ac_check_lib_save_LIBS=$LIBS
LIBS="-ldl  $LIBS"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */

/* Override any GCC internal prototype to avoid an error.
   Use char because int might match the return type of a GCC
   builtin and then its argument prototype would still apply.  */
#ifdef __cplusplus
extern "C"
#endif
char dlopen ();
int
main ()
{
return dlopen ();
  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
  ac_cv_lib_dl_dlopen=yes
else
  ac_cv_lib_dl_dlopen=no
fi
rm -f core conftest.err conftest.$ac_objext \
    conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
else

    lt_cv_dlopen="dyld"
    lt_cv_dlopen_libs=
    lt_cv_dlopen_self=yes

fi

   ;;

  *)
    ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
if test "x$ac_cv_func_shl_load" = xyes; then :
  lt_cv_dlopen="shl_load"
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
$as_echo_n "checking for shl_load in -ldld... " >&6; }
if ${ac_cv_lib_dld_shl_load+:} false; then :
  $as_echo_n "(cached) " >&6
else
  ac_check_lib_save_LIBS=$LIBS
LIBS="-ldld  $LIBS"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */

/* Override any GCC internal prototype to avoid an error.
   Use char because int might match the return type of a GCC
   builtin and then its argument prototype would still apply.  */
#ifdef __cplusplus
extern "C"
#endif
char shl_load ();
int
main ()
{
return shl_load ();
  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
  ac_cv_lib_dld_shl_load=yes
else
  ac_cv_lib_dld_shl_load=no
fi
rm -f core conftest.err conftest.$ac_objext \
    conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
else
  ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
if test "x$ac_cv_func_dlopen" = xyes; then :
  lt_cv_dlopen="dlopen"
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
$as_echo_n "checking for dlopen in -ldl... " >&6; }
if ${ac_cv_lib_dl_dlopen+:} false; then :
  $as_echo_n "(cached) " >&6
else
  ac_check_lib_save_LIBS=$LIBS
LIBS="-ldl  $LIBS"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */

/* Override any GCC internal prototype to avoid an error.
   Use char because int might match the return type of a GCC
   builtin and then its argument prototype would still apply.  */
#ifdef __cplusplus
extern "C"
#endif
char dlopen ();
int
main ()
{
return dlopen ();
  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
  ac_cv_lib_dl_dlopen=yes
else
  ac_cv_lib_dl_dlopen=no
fi
rm -f core conftest.err conftest.$ac_objext \
    conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
$as_echo_n "checking for dlopen in -lsvld... " >&6; }
if ${ac_cv_lib_svld_dlopen+:} false; then :
  $as_echo_n "(cached) " >&6
else
  ac_check_lib_save_LIBS=$LIBS
LIBS="-lsvld  $LIBS"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */

/* Override any GCC internal prototype to avoid an error.
   Use char because int might match the return type of a GCC
   builtin and then its argument prototype would still apply.  */
#ifdef __cplusplus
extern "C"
#endif
char dlopen ();
int
main ()
{
return dlopen ();
  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
  ac_cv_lib_svld_dlopen=yes
else
  ac_cv_lib_svld_dlopen=no
fi
rm -f core conftest.err conftest.$ac_objext \
    conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
$as_echo_n "checking for dld_link in -ldld... " >&6; }
if ${ac_cv_lib_dld_dld_link+:} false; then :
  $as_echo_n "(cached) " >&6
else
  ac_check_lib_save_LIBS=$LIBS
LIBS="-ldld  $LIBS"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */

/* Override any GCC internal prototype to avoid an error.
   Use char because int might match the return type of a GCC
   builtin and then its argument prototype would still apply.  */
#ifdef __cplusplus
extern "C"
#endif
char dld_link ();
int
main ()
{
return dld_link ();
  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
  ac_cv_lib_dld_dld_link=yes
else
  ac_cv_lib_dld_dld_link=no
fi
rm -f core conftest.err conftest.$ac_objext \
    conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
fi

fi

fi

fi

fi

fi

    ;;
  esac

  if test "x$lt_cv_dlopen" != xno; then
    enable_dlopen=yes
  else
    enable_dlopen=no
  fi

  case $lt_cv_dlopen in
  dlopen)
    save_CPPFLAGS="$CPPFLAGS"
    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"

    save_LDFLAGS="$LDFLAGS"
    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"

    save_LIBS="$LIBS"
    LIBS="$lt_cv_dlopen_libs $LIBS"

    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
$as_echo_n "checking whether a program can dlopen itself... " >&6; }
if ${lt_cv_dlopen_self+:} false; then :
  $as_echo_n "(cached) " >&6
else
      if test "$cross_compiling" = yes; then :
  lt_cv_dlopen_self=cross
else
  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
  lt_status=$lt_dlunknown
  cat > conftest.$ac_ext <<EOF
#line 10562 "configure"
#include "confdefs.h"

#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif

#include <stdio.h>
#include <stdlib.h>

#ifdef RTLD_GLOBAL
#  define LT_DLGLOBAL       RTLD_GLOBAL
#else
#  ifdef DL_GLOBAL
#    define LT_DLGLOBAL     DL_GLOBAL
#  else
#    define LT_DLGLOBAL     0
#  endif
#endif

/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
   find out it does not work in some platform. */
#ifndef LT_DLLAZY_OR_NOW
#  ifdef RTLD_LAZY
#    define LT_DLLAZY_OR_NOW        RTLD_LAZY
#  else
#    ifdef DL_LAZY
#      define LT_DLLAZY_OR_NOW      DL_LAZY
#    else
#      ifdef RTLD_NOW
#        define LT_DLLAZY_OR_NOW    RTLD_NOW
#      else
#        ifdef DL_NOW
#          define LT_DLLAZY_OR_NOW  DL_NOW
#        else
#          define LT_DLLAZY_OR_NOW  0
#        endif
#      endif
#    endif
#  endif
#endif

void fnord() { int i=42;}
int main ()
{
  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
  int status = $lt_dlunknown;

  if (self)
    {
      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
      /* dlclose (self); */
    }
  else
    puts (dlerror ());

    return (status);
}
EOF
  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
    (./conftest; exit; ) >&5 2>/dev/null
    lt_status=$?
    case x$lt_status in
      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
    esac
  else :
    # compilation failed
    lt_cv_dlopen_self=no
  fi
fi
rm -fr conftest*

fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
$as_echo "$lt_cv_dlopen_self" >&6; }

    if test "x$lt_cv_dlopen_self" = xyes; then
      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
if ${lt_cv_dlopen_self_static+:} false; then :
  $as_echo_n "(cached) " >&6
else
      if test "$cross_compiling" = yes; then :
  lt_cv_dlopen_self_static=cross
else
  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
  lt_status=$lt_dlunknown
  cat > conftest.$ac_ext <<EOF
#line 10659 "configure"
#include "confdefs.h"

#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif

#include <stdio.h>
#include <stdlib.h>

#ifdef RTLD_GLOBAL
#  define LT_DLGLOBAL       RTLD_GLOBAL
#else
#  ifdef DL_GLOBAL
#    define LT_DLGLOBAL     DL_GLOBAL
#  else
#    define LT_DLGLOBAL     0
#  endif
#endif

/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
   find out it does not work in some platform. */
#ifndef LT_DLLAZY_OR_NOW
#  ifdef RTLD_LAZY
#    define LT_DLLAZY_OR_NOW        RTLD_LAZY
#  else
#    ifdef DL_LAZY
#      define LT_DLLAZY_OR_NOW      DL_LAZY
#    else
#      ifdef RTLD_NOW
#        define LT_DLLAZY_OR_NOW    RTLD_NOW
#      else
#        ifdef DL_NOW
#          define LT_DLLAZY_OR_NOW  DL_NOW
#        else
#          define LT_DLLAZY_OR_NOW  0
#        endif
#      endif
#    endif
#  endif
#endif

void fnord() { int i=42;}
int main ()
{
  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
  int status = $lt_dlunknown;

  if (self)
    {
      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
      /* dlclose (self); */
    }
  else
    puts (dlerror ());

    return (status);
}
EOF
  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
    (./conftest; exit; ) >&5 2>/dev/null
    lt_status=$?
    case x$lt_status in
      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
    esac
  else :
    # compilation failed
    lt_cv_dlopen_self_static=no
  fi
fi
rm -fr conftest*

fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
$as_echo "$lt_cv_dlopen_self_static" >&6; }
    fi

    CPPFLAGS="$save_CPPFLAGS"
    LDFLAGS="$save_LDFLAGS"
    LIBS="$save_LIBS"
    ;;
  esac

  case $lt_cv_dlopen_self in
  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
  *) enable_dlopen_self=unknown ;;
  esac

  case $lt_cv_dlopen_self_static in
  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
  *) enable_dlopen_self_static=unknown ;;
  esac
fi

# Report which library types will actually be built
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
$as_echo_n "checking if libtool supports shared libraries... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
$as_echo "$can_build_shared" >&6; }

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
$as_echo_n "checking whether to build shared libraries... " >&6; }
test "$can_build_shared" = "no" && enable_shared=no

# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
  test "$enable_shared" = yes && enable_static=no
  if test -n "$RANLIB"; then
    archive_cmds="$archive_cmds~\$RANLIB \$lib"
    postinstall_cmds='$RANLIB $lib'
  fi
  ;;

aix[4-9]*)
  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
    test "$enable_shared" = yes && enable_static=no
  fi
    ;;
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
$as_echo "$enable_shared" >&6; }

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
$as_echo_n "checking whether to build static libraries... " >&6; }
# Make sure either enable_shared or enable_static is yes.
test "$enable_shared" = yes || enable_static=yes
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
$as_echo "$enable_static" >&6; }

# The else clause should only fire when bootstrapping the
# libtool distribution, otherwise you forgot to ship ltmain.sh
# with your package, and you will get complaints that there are
# no rules to generate ltmain.sh.
if test -f "$ltmain"; then
  # See if we are running on zsh, and set the options which allow our commands through
  # without removal of \ escapes.
  if test -n "${ZSH_VERSION+set}" ; then
    setopt NO_GLOB_SUBST
  fi
  # Now quote all the things that may contain metacharacters while being
  # careful not to overquote the AC_SUBSTed values.  We take copies of the
  # variables and quote the copies for generation of the libtool script.
  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
    SED SHELL STRIP \
    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
    deplibs_check_method reload_flag reload_cmds need_locks \
    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
    lt_cv_sys_global_symbol_to_c_name_address \
    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
    old_postinstall_cmds old_postuninstall_cmds \
    compiler \
    CC \
    LD \
    lt_prog_compiler_wl \
    lt_prog_compiler_pic \
    lt_prog_compiler_static \
    lt_prog_compiler_no_builtin_flag \
    export_dynamic_flag_spec \
    thread_safe_flag_spec \
    whole_archive_flag_spec \
    enable_shared_with_static_runtimes \
    old_archive_cmds \
    old_archive_from_new_cmds \
    predep_objects \
    postdep_objects \
    predeps \
    postdeps \
    compiler_lib_search_path \
    compiler_lib_search_dirs \
    archive_cmds \
    archive_expsym_cmds \
    postinstall_cmds \
    postuninstall_cmds \
    old_archive_from_expsyms_cmds \
    allow_undefined_flag \
    no_undefined_flag \
    export_symbols_cmds \
    hardcode_libdir_flag_spec \
    hardcode_libdir_flag_spec_ld \
    hardcode_libdir_separator \
    hardcode_automatic \
    module_cmds \
    module_expsym_cmds \
    lt_cv_prog_compiler_c_o \
    fix_srcfile_path \
    exclude_expsyms \
    include_expsyms; do

    case $var in
    old_archive_cmds | \
    old_archive_from_new_cmds | \
    archive_cmds | \
    archive_expsym_cmds | \
    module_cmds | \
    module_expsym_cmds | \
    old_archive_from_expsyms_cmds | \
    export_symbols_cmds | \
    extract_expsyms_cmds | reload_cmds | finish_cmds | \
    postinstall_cmds | postuninstall_cmds | \
    old_postinstall_cmds | old_postuninstall_cmds | \
    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
      # Double-quote double-evaled strings.
      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
      ;;
    *)
      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
      ;;
    esac
  done

  case $lt_echo in
  *'\$0 --fallback-echo"')
    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
    ;;
  esac

cfgfile="${ofile}T"
  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
  $rm -f "$cfgfile"
  { $as_echo "$as_me:${as_lineno-$LINENO}: result:
creating $ofile" >&5
$as_echo "
creating $ofile" >&6; }

  cat <<__EOF__ >> "$cfgfile"
#! $SHELL

# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
#
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
# Free Software Foundation, Inc.
#
# This file is part of GNU Libtool:
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.

# A sed program that does not truncate output.
SED=$lt_SED

# Sed that helps us avoid accidentally triggering echo(1) options like -n.
Xsed="$SED -e 1s/^X//"

# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH

# The names of the tagged configurations supported by this script.
available_tags=

# ### BEGIN LIBTOOL CONFIG

# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:

# Shell to use when invoking shell scripts.
SHELL=$lt_SHELL

# Whether or not to build shared libraries.
build_libtool_libs=$enable_shared

# Whether or not to build static libraries.
build_old_libs=$enable_static

# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=$archive_cmds_need_lc

# Whether or not to disallow shared libs when runtime libs are static
allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes

# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install

# The host system.
host_alias=$host_alias
host=$host
host_os=$host_os

# The build system.
build_alias=$build_alias
build=$build
build_os=$build_os

# An echo program that does not interpret backslashes.
echo=$lt_echo

# The archiver.
AR=$lt_AR
AR_FLAGS=$lt_AR_FLAGS

# A C compiler.
LTCC=$lt_LTCC

# LTCC compiler flags.
LTCFLAGS=$lt_LTCFLAGS

# A language-specific compiler.
CC=$lt_compiler

# Is the compiler the GNU C compiler?
with_gcc=$GCC

# An ERE matcher.
EGREP=$lt_EGREP

# The linker used to build libraries.
LD=$lt_LD

# Whether we need hard or soft links.
LN_S=$lt_LN_S

# A BSD-compatible nm program.
NM=$lt_NM

# A symbol stripping program
STRIP=$lt_STRIP

# Used to examine libraries when file_magic_cmd begins "file"
MAGIC_CMD=$MAGIC_CMD

# Used on cygwin: DLL creation program.
DLLTOOL="$DLLTOOL"

# Used on cygwin: object dumper.
OBJDUMP="$OBJDUMP"

# Used on cygwin: assembler.
AS="$AS"

# The name of the directory that contains temporary libtool files.
objdir=$objdir

# How to create reloadable object files.
reload_flag=$lt_reload_flag
reload_cmds=$lt_reload_cmds

# How to pass a linker flag through the compiler.
wl=$lt_lt_prog_compiler_wl

# Object file suffix (normally "o").
objext="$ac_objext"

# Old archive suffix (normally "a").
libext="$libext"

# Shared library suffix (normally ".so").
shrext_cmds='$shrext_cmds'

# Executable file suffix (normally "").
exeext="$exeext"

# Additional compiler flags for building library objects.
pic_flag=$lt_lt_prog_compiler_pic
pic_mode=$pic_mode

# What is the maximum length of a command?
max_cmd_len=$lt_cv_sys_max_cmd_len

# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o

# Must we lock files when doing compilation?
need_locks=$lt_need_locks

# Do we need the lib prefix for modules?
need_lib_prefix=$need_lib_prefix

# Do we need a version for libraries?
need_version=$need_version

# Whether dlopen is supported.
dlopen_support=$enable_dlopen

# Whether dlopen of programs is supported.
dlopen_self=$enable_dlopen_self

# Whether dlopen of statically linked programs is supported.
dlopen_self_static=$enable_dlopen_self_static

# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_lt_prog_compiler_static

# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag

# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec=$lt_export_dynamic_flag_spec

# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec=$lt_whole_archive_flag_spec

# Compiler flag to generate thread-safe objects.
thread_safe_flag_spec=$lt_thread_safe_flag_spec

# Library versioning type.
version_type=$version_type

# Format of library name prefix.
libname_spec=$lt_libname_spec

# List of archive names.  First name is the real one, the rest are links.
# The last name is the one that the linker finds with -lNAME.
library_names_spec=$lt_library_names_spec

# The coded name of the library, if different from the real name.
soname_spec=$lt_soname_spec

# Commands used to build and install an old-style archive.
RANLIB=$lt_RANLIB
old_archive_cmds=$lt_old_archive_cmds
old_postinstall_cmds=$lt_old_postinstall_cmds
old_postuninstall_cmds=$lt_old_postuninstall_cmds

# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=$lt_old_archive_from_new_cmds

# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds

# Commands used to build and install a shared archive.
archive_cmds=$lt_archive_cmds
archive_expsym_cmds=$lt_archive_expsym_cmds
postinstall_cmds=$lt_postinstall_cmds
postuninstall_cmds=$lt_postuninstall_cmds

# Commands used to build a loadable module (assumed same as above if empty)
module_cmds=$lt_module_cmds
module_expsym_cmds=$lt_module_expsym_cmds

# Commands to strip libraries.
old_striplib=$lt_old_striplib
striplib=$lt_striplib

# Dependencies to place before the objects being linked to create a
# shared library.
predep_objects=$lt_predep_objects

# Dependencies to place after the objects being linked to create a
# shared library.
postdep_objects=$lt_postdep_objects

# Dependencies to place before the objects being linked to create a
# shared library.
predeps=$lt_predeps

# Dependencies to place after the objects being linked to create a
# shared library.
postdeps=$lt_postdeps

# The directories searched by this compiler when creating a shared
# library
compiler_lib_search_dirs=$lt_compiler_lib_search_dirs

# The library search path used internally by the compiler when linking
# a shared library.
compiler_lib_search_path=$lt_compiler_lib_search_path

# Method to check whether dependent libraries are shared objects.
deplibs_check_method=$lt_deplibs_check_method

# Command to use when deplibs_check_method == file_magic.
file_magic_cmd=$lt_file_magic_cmd

# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=$lt_allow_undefined_flag

# Flag that forces no undefined symbols.
no_undefined_flag=$lt_no_undefined_flag

# Commands used to finish a libtool library installation in a directory.
finish_cmds=$lt_finish_cmds

# Same as above, but a single script fragment to be evaled but not shown.
finish_eval=$lt_finish_eval

# Take the output of nm and produce a listing of raw symbols and C names.
global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe

# Transform the output of nm in a proper C declaration
global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl

# Transform the output of nm in a C name address pair
global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address

# This is the shared library runtime path variable.
runpath_var=$runpath_var

# This is the shared library path variable.
shlibpath_var=$shlibpath_var

# Is shlibpath searched before the hard-coded library search path?
shlibpath_overrides_runpath=$shlibpath_overrides_runpath

# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action

# Whether we should hardcode library paths into libraries.
hardcode_into_libs=$hardcode_into_libs

# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist.
hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec

# If ld is used when linking, flag to hardcode \$libdir into
# a binary during linking. This must work even if \$libdir does
# not exist.
hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld

# Whether we need a single -rpath flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator

# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
# resulting binary.
hardcode_direct=$hardcode_direct

# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
# resulting binary.
hardcode_minus_L=$hardcode_minus_L

# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
# the resulting binary.
hardcode_shlibpath_var=$hardcode_shlibpath_var

# Set to yes if building a shared library automatically hardcodes DIR into the library
# and all subsequent libraries and executables linked against it.
hardcode_automatic=$hardcode_automatic

# Variables whose values should be saved in libtool wrapper scripts and
# restored at relink time.
variables_saved_for_relink="$variables_saved_for_relink"

# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs

# Compile-time system search path for libraries
sys_lib_search_path_spec=$lt_sys_lib_search_path_spec

# Run-time system search path for libraries
sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec

# Fix the shell variable \$srcfile for the compiler.
fix_srcfile_path=$lt_fix_srcfile_path

# Set to yes if exported symbols are required.
always_export_symbols=$always_export_symbols

# The commands to list exported symbols.
export_symbols_cmds=$lt_export_symbols_cmds

# The commands to extract the exported symbol list from a shared archive.
extract_expsyms_cmds=$lt_extract_expsyms_cmds

# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=$lt_exclude_expsyms

# Symbols that must always be exported.
include_expsyms=$lt_include_expsyms

# ### END LIBTOOL CONFIG

__EOF__

  case $host_os in
  aix3*)
    cat <<\EOF >> "$cfgfile"

# AIX sometimes has problems with the GCC collect2 program.  For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
if test "X${COLLECT_NAMES+set}" != Xset; then
  COLLECT_NAMES=
  export COLLECT_NAMES
fi
EOF
    ;;
  esac

  # We use sed instead of cat because bash on DJGPP gets confused if
  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
  # text mode, it properly converts lines to CR/LF.  This bash problem
  # is reportedly fixed, but why not run on old versions too?
  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)

  mv -f "$cfgfile" "$ofile" || \
    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
  chmod +x "$ofile"

else
  # If there is no Makefile yet, we rely on a make rule to execute
  # `config.status --recheck' to rerun these tests and create the
  # libtool script then.
  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
  if test -f "$ltmain_in"; then
    test -f Makefile && make "$ltmain"
  fi
fi

ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu

CC="$lt_save_CC"

# Check whether --with-tags was given.
if test "${with_tags+set}" = set; then :
  withval=$with_tags; tagnames="$withval"
fi

if test -f "$ltmain" && test -n "$tagnames"; then
  if test ! -f "${ofile}"; then
    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: output file '$ofile' does not exist" >&5
$as_echo "$as_me: WARNING: output file '$ofile' does not exist" >&2;}
  fi

  if test -z "$LTCC"; then
    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
    if test -z "$LTCC"; then
      { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: output file '$ofile' does not look like a libtool script" >&5
$as_echo "$as_me: WARNING: output file '$ofile' does not look like a libtool script" >&2;}
    else
      { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using 'LTCC=$LTCC', extracted from '$ofile'" >&5
$as_echo "$as_me: WARNING: using 'LTCC=$LTCC', extracted from '$ofile'" >&2;}
    fi
  fi
  if test -z "$LTCFLAGS"; then
    eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
  fi

  # Extract list of available tagged configurations in $ofile.
  # Note that this assumes the entire list is on one line.
  available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`

  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
  for tagname in $tagnames; do
    IFS="$lt_save_ifs"
    # Check whether tagname contains only valid characters
    case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in
    "") ;;
    *)  as_fn_error $? "invalid tag name: $tagname" "$LINENO" 5
    ;;
    esac

    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
    then
      as_fn_error $? "tag name \"$tagname\" already exists" "$LINENO" 5
    fi

    # Update the list of available tags.
    if test -n "$tagname"; then
      echo appending configuration tag \"$tagname\" to $ofile

      case $tagname in
      CXX)
    if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
        ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
        (test "X$CXX" != "Xg++"))) ; then
      ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu

archive_cmds_need_lc_CXX=no
allow_undefined_flag_CXX=
always_export_symbols_CXX=no
archive_expsym_cmds_CXX=
export_dynamic_flag_spec_CXX=
hardcode_direct_CXX=no
hardcode_libdir_flag_spec_CXX=
hardcode_libdir_flag_spec_ld_CXX=
hardcode_libdir_separator_CXX=
hardcode_minus_L_CXX=no
hardcode_shlibpath_var_CXX=unsupported
hardcode_automatic_CXX=no
module_cmds_CXX=
module_expsym_cmds_CXX=
link_all_deplibs_CXX=unknown
old_archive_cmds_CXX=$old_archive_cmds
no_undefined_flag_CXX=
whole_archive_flag_spec_CXX=
enable_shared_with_static_runtimes_CXX=no

# Dependencies to place before and after the object being linked:
predep_objects_CXX=
postdep_objects_CXX=
predeps_CXX=
postdeps_CXX=
compiler_lib_search_path_CXX=
compiler_lib_search_dirs_CXX=

# Source file extension for C++ test sources.
ac_ext=cpp

# Object file extension for compiled C++ test sources.
objext=o
objext_CXX=$objext

# Code to be used in simple compile tests
lt_simple_compile_test_code="int some_variable = 0;"

# Code to be used in simple link tests
lt_simple_link_test_code='int main(int, char *[]) { return(0); }'

# ltmain only uses $CC for tagged configurations so make sure $CC is set.

# If no C compiler was specified, use CC.
LTCC=${LTCC-"$CC"}

# If no C compiler flags were specified, use CFLAGS.
LTCFLAGS=${LTCFLAGS-"$CFLAGS"}

# Allow CC to be a program name with arguments.
compiler=$CC

# save warnings/boilerplate of simple test code
ac_outfile=conftest.$ac_objext
echo "$lt_simple_compile_test_code" >conftest.$ac_ext
eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_compiler_boilerplate=`cat conftest.err`
$rm conftest*

ac_outfile=conftest.$ac_objext
echo "$lt_simple_link_test_code" >conftest.$ac_ext
eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_linker_boilerplate=`cat conftest.err`
$rm -r conftest*

# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_LD=$LD
lt_save_GCC=$GCC
GCC=$GXX
lt_save_with_gnu_ld=$with_gnu_ld
lt_save_path_LD=$lt_cv_path_LD
if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
  lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
else
  unset lt_cv_prog_gnu_ld
fi
if test -n "${lt_cv_path_LDCXX+set}"; then
  lt_cv_path_LD=$lt_cv_path_LDCXX
else
  unset lt_cv_path_LD
fi
test -z "${LDCXX+set}" || LD=$LDCXX
CC=${CXX-"c++"}
compiler=$CC
compiler_CXX=$CC
for cc_temp in $compiler""; do
  case $cc_temp in
    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
    \-*) ;;
    *) break;;
  esac
done
cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`

# We don't want -fno-exception wen compiling C++ code, so set the
# no_builtin_flag separately
if test "$GXX" = yes; then
  lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
else
  lt_prog_compiler_no_builtin_flag_CXX=
fi

if test "$GXX" = yes; then
  # Set up default GNU C++ configuration

# Check whether --with-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then :
  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
else
  with_gnu_ld=no
fi

ac_prog=ld
if test "$GCC" = yes; then
  # Check if gcc -print-prog-name=ld gives a path.
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
$as_echo_n "checking for ld used by $CC... " >&6; }
  case $host in
  *-*-mingw*)
    # gcc leaves a trailing carriage return which upsets mingw
    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
  *)
    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
  esac
  case $ac_prog in
    # Accept absolute paths.
    [\\/]* | ?:[\\/]*)
      re_direlt='/[^/][^/]*/\.\./'
      # Canonicalize the pathname of ld
      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
    ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
      done
      test -z "$LD" && LD="$ac_prog"
      ;;
  "")
    # If it fails, then pretend we aren't using GCC.
    ac_prog=ld
    ;;
  *)
    # If it is relative, then search for the first ld in PATH.
    with_gnu_ld=unknown
    ;;
  esac
elif test "$with_gnu_ld" = yes; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
$as_echo_n "checking for GNU ld... " >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
$as_echo_n "checking for non-GNU ld... " >&6; }
fi
if ${lt_cv_path_LD+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test -z "$LD"; then
  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
  for ac_dir in $PATH; do
    IFS="$lt_save_ifs"
    test -z "$ac_dir" && ac_dir=.
    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
      lt_cv_path_LD="$ac_dir/$ac_prog"
      # Check to see if the program is GNU ld.  I'd rather use --version,
      # but apparently some variants of GNU ld only accept -v.
      # Break only if it was the GNU/non-GNU ld that we prefer.
      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
      *GNU* | *'with BFD'*)
    test "$with_gnu_ld" != no && break
    ;;
      *)
    test "$with_gnu_ld" != yes && break
    ;;
      esac
    fi
  done
  IFS="$lt_save_ifs"
else
  lt_cv_path_LD="$LD" # Let the user override the test with a path.
fi
fi

LD="$lt_cv_path_LD"
if test -n "$LD"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
$as_echo "$LD" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
if ${lt_cv_prog_gnu_ld+:} false; then :
  $as_echo_n "(cached) " >&6
else
  # I'd rather use --version here, but apparently some GNU lds only accept -v.
case `$LD -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
  lt_cv_prog_gnu_ld=yes
  ;;
*)
  lt_cv_prog_gnu_ld=no
  ;;
esac
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
$as_echo "$lt_cv_prog_gnu_ld" >&6; }
with_gnu_ld=$lt_cv_prog_gnu_ld

  # Check if GNU C++ uses GNU ld as the underlying linker, since the
  # archiving commands below assume that GNU ld is being used.
  if test "$with_gnu_ld" = yes; then
    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
    archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'

    hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'

    # If archive_cmds runs LD, not CC, wlarc should be empty
    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
    #     investigate it a little bit more. (MM)
    wlarc='${wl}'

    # ancient GNU ld didn't support --whole-archive et. al.
    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
    grep 'no-whole-archive' > /dev/null; then
      whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
    else
      whole_archive_flag_spec_CXX=
    fi
  else
    with_gnu_ld=no
    wlarc=

    # A generic and very simple default shared library creation
    # command for GNU C++ for the case where it uses the native
    # linker, instead of GNU ld.  If possible, this setting should
    # overridden to take advantage of the native linker features on
    # the platform it is being used on.
    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
  fi

  # Commands to make compiler produce verbose output that lists
  # what "hidden" libraries, object files and flags are used when
  # linking a shared library.
  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'

else
  GXX=no
  with_gnu_ld=no
  wlarc=
fi

# PORTME: fill in a description of your system's C++ link characteristics
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
ld_shlibs_CXX=yes
case $host_os in
  aix3*)
    # FIXME: insert proper C++ library support
    ld_shlibs_CXX=no
    ;;
  aix[4-9]*)
    if test "$host_cpu" = ia64; then
      # On IA64, the linker does run time linking by default, so we don't
      # have to do anything special.
      aix_use_runtimelinking=no
      exp_sym_flag='-Bexport'
      no_entry_flag=""
    else
      aix_use_runtimelinking=no

      # Test if we are trying to use run time linking or normal
      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
      # need to do runtime linking.
      case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
    for ld_flag in $LDFLAGS; do
      case $ld_flag in
      *-brtl*)
        aix_use_runtimelinking=yes
        break
        ;;
      esac
    done
    ;;
      esac

      exp_sym_flag='-bexport'
      no_entry_flag='-bnoentry'
    fi

    # When large executables or shared objects are built, AIX ld can
    # have problems creating the table of contents.  If linking a library
    # or program results in "error TOC overflow" add -mminimal-toc to
    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.

    archive_cmds_CXX=''
    hardcode_direct_CXX=yes
    hardcode_libdir_separator_CXX=':'
    link_all_deplibs_CXX=yes

    if test "$GXX" = yes; then
      case $host_os in aix4.[012]|aix4.[012].*)
      # We only want to do this on AIX 4.2 and lower, the check
      # below for broken collect2 doesn't work under 4.3+
    collect2name=`${CC} -print-prog-name=collect2`
    if test -f "$collect2name" && \
       strings "$collect2name" | grep resolve_lib_name >/dev/null
    then
      # We have reworked collect2
      :
    else
      # We have old collect2
      hardcode_direct_CXX=unsupported
      # It fails to find uninstalled libraries when the uninstalled
      # path is not listed in the libpath.  Setting hardcode_minus_L
      # to unsupported forces relinking
      hardcode_minus_L_CXX=yes
      hardcode_libdir_flag_spec_CXX='-L$libdir'
      hardcode_libdir_separator_CXX=
    fi
    ;;
      esac
      shared_flag='-shared'
      if test "$aix_use_runtimelinking" = yes; then
    shared_flag="$shared_flag "'${wl}-G'
      fi
    else
      # not using gcc
      if test "$host_cpu" = ia64; then
    # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
    # chokes on -Wl,-G. The following line is correct:
    shared_flag='-G'
      else
    if test "$aix_use_runtimelinking" = yes; then
      shared_flag='${wl}-G'
    else
      shared_flag='${wl}-bM:SRE'
    fi
      fi
    fi

    # It seems that -bexpall does not export symbols beginning with
    # underscore (_), so it is better to generate a list of symbols to export.
    always_export_symbols_CXX=yes
    if test "$aix_use_runtimelinking" = yes; then
      # Warning - without using the other runtime loading flags (-brtl),
      # -berok will link without error, but may produce a broken library.
      allow_undefined_flag_CXX='-berok'
      # Determine the default libpath from the value encoded in an empty executable.

cat > conftest.$ac_ext <<EOF
#line 11720 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; } && test -s conftest${ac_exeext}; then

lt_aix_libpath_sed='
    /Import File Strings/,/^$/ {
    /^0/ {
        s/^0  *\(.*\)$/\1/
        p
    }
    }'
aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
# Check for a 64-bit object if we didn't find anything.
if test -z "$aix_libpath"; then
  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
fi
  rm -rf conftest*
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&6
fi
rm -f conftest*
if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi

      hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"

      archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
     else
      if test "$host_cpu" = ia64; then
    hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
    allow_undefined_flag_CXX="-z nodefs"
    archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
      else
    # Determine the default libpath from the value encoded in an empty executable.

cat > conftest.$ac_ext <<EOF
#line 11763 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; } && test -s conftest${ac_exeext}; then

lt_aix_libpath_sed='
    /Import File Strings/,/^$/ {
    /^0/ {
        s/^0  *\(.*\)$/\1/
        p
    }
    }'
aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
# Check for a 64-bit object if we didn't find anything.
if test -z "$aix_libpath"; then
  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
fi
  rm -rf conftest*
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&6
fi
rm -f conftest*
if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi

    hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
    # Warning - without using the other run time loading flags,
    # -berok will link without error, but may produce a broken library.
    no_undefined_flag_CXX=' ${wl}-bernotok'
    allow_undefined_flag_CXX=' ${wl}-berok'
    # Exported symbols can be pulled into shared objects from archives
    whole_archive_flag_spec_CXX='$convenience'
    archive_cmds_need_lc_CXX=yes
    # This is similar to how AIX traditionally builds its shared libraries.
    archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
      fi
    fi
    ;;

  beos*)
    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
      allow_undefined_flag_CXX=unsupported
      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
      # support --undefined.  This deserves some investigation.  FIXME
      archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
    else
      ld_shlibs_CXX=no
    fi
    ;;

  chorus*)
    case $cc_basename in
      *)
    # FIXME: insert proper C++ library support
    ld_shlibs_CXX=no
    ;;
    esac
    ;;

  cygwin* | mingw* | pw32*)
    # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
    # as there is no search path for DLLs.
    hardcode_libdir_flag_spec_CXX='-L$libdir'
    allow_undefined_flag_CXX=unsupported
    always_export_symbols_CXX=no
    enable_shared_with_static_runtimes_CXX=yes

    if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
      archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
      # If the export-symbols file already is a .def file (1st line
      # is EXPORTS), use it as is; otherwise, prepend...
      archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
    cp $export_symbols $output_objdir/$soname.def;
      else
    echo EXPORTS > $output_objdir/$soname.def;
    cat $export_symbols >> $output_objdir/$soname.def;
      fi~
      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
    else
      ld_shlibs_CXX=no
    fi
  ;;
      darwin* | rhapsody*)
      archive_cmds_need_lc_CXX=no
      hardcode_direct_CXX=no
      hardcode_automatic_CXX=yes
      hardcode_shlibpath_var_CXX=unsupported
      whole_archive_flag_spec_CXX=''
      link_all_deplibs_CXX=yes
      allow_undefined_flag_CXX="$_lt_dar_allow_undefined"
      if test "$GXX" = yes ; then
      output_verbose_link_cmd='echo'
      archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
      module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
      archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
      module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
      if test "$lt_cv_apple_cc_single_mod" != "yes"; then
        archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
        archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
      fi
      else
      case $cc_basename in
        xlc*)
         output_verbose_link_cmd='echo'
          archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
          module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
          archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
          module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
          ;;
       *)
         ld_shlibs_CXX=no
          ;;
      esac
      fi
        ;;

  dgux*)
    case $cc_basename in
      ec++*)
    # FIXME: insert proper C++ library support
    ld_shlibs_CXX=no
    ;;
      ghcx*)
    # Green Hills C++ Compiler
    # FIXME: insert proper C++ library support
    ld_shlibs_CXX=no
    ;;
      *)
    # FIXME: insert proper C++ library support
    ld_shlibs_CXX=no
    ;;
    esac
    ;;
  freebsd[12].*)
    # C++ shared libraries reported to be fairly broken before switch to ELF
    ld_shlibs_CXX=no
    ;;
  freebsd-elf*)
    archive_cmds_need_lc_CXX=no
    ;;
  freebsd* | dragonfly*)
    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
    # conventions
    ld_shlibs_CXX=yes
    ;;
  gnu*)
    ;;
  hpux9*)
    hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
    hardcode_libdir_separator_CXX=:
    export_dynamic_flag_spec_CXX='${wl}-E'
    hardcode_direct_CXX=yes
    hardcode_minus_L_CXX=yes # Not in the search PATH,
                # but as the default
                # location of the library.

    case $cc_basename in
    CC*)
      # FIXME: insert proper C++ library support
      ld_shlibs_CXX=no
      ;;
    aCC*)
      archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
      # Commands to make compiler produce verbose output that lists
      # what "hidden" libraries, object files and flags are used when
      # linking a shared library.
      #
      # There doesn't appear to be a way to prevent this compiler from
      # explicitly linking system object files so we need to strip them
      # from the output so that they don't get included in the library
      # dependencies.
      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
      ;;
    *)
      if test "$GXX" = yes; then
        archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
      else
        # FIXME: insert proper C++ library support
        ld_shlibs_CXX=no
      fi
      ;;
    esac
    ;;
  hpux10*|hpux11*)
    if test $with_gnu_ld = no; then
      hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
      hardcode_libdir_separator_CXX=:

      case $host_cpu in
      hppa*64*|ia64*) ;;
      *)
    export_dynamic_flag_spec_CXX='${wl}-E'
        ;;
      esac
    fi
    case $host_cpu in
    hppa*64*|ia64*)
      hardcode_direct_CXX=no
      hardcode_shlibpath_var_CXX=no
      ;;
    *)
      hardcode_direct_CXX=yes
      hardcode_minus_L_CXX=yes # Not in the search PATH,
                          # but as the default
                          # location of the library.
      ;;
    esac

    case $cc_basename in
      CC*)
    # FIXME: insert proper C++ library support
    ld_shlibs_CXX=no
    ;;
      aCC*)
    case $host_cpu in
    hppa*64*)
      archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
      ;;
    ia64*)
      archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
      ;;
    *)
      archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
      ;;
    esac
    # Commands to make compiler produce verbose output that lists
    # what "hidden" libraries, object files and flags are used when
    # linking a shared library.
    #
    # There doesn't appear to be a way to prevent this compiler from
    # explicitly linking system object files so we need to strip them
    # from the output so that they don't get included in the library
    # dependencies.
    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
    ;;
      *)
    if test "$GXX" = yes; then
      if test $with_gnu_ld = no; then
        case $host_cpu in
        hppa*64*)
          archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
          ;;
        ia64*)
          archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
          ;;
        *)
          archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
          ;;
        esac
      fi
    else
      # FIXME: insert proper C++ library support
      ld_shlibs_CXX=no
    fi
    ;;
    esac
    ;;
  interix[3-9]*)
    hardcode_direct_CXX=no
    hardcode_shlibpath_var_CXX=no
    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
    export_dynamic_flag_spec_CXX='${wl}-E'
    # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
    # Instead, shared libraries are loaded at an image base (0x10000000 by
    # default) and relocated if they conflict, which is a slow very memory
    # consuming and fragmenting process.  To avoid this, we pick a random,
    # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
    # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
    archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
    archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
    ;;
  irix5* | irix6*)
    case $cc_basename in
      CC*)
    # SGI C++
    archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'

    # Archives containing C++ object files must be created using
    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
    # necessary to make sure instantiated templates are included
    # in the archive.
    old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
    ;;
      *)
    if test "$GXX" = yes; then
      if test "$with_gnu_ld" = no; then
        archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
      else
        archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
      fi
    fi
    link_all_deplibs_CXX=yes
    ;;
    esac
    hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
    hardcode_libdir_separator_CXX=:
    ;;
  linux* | k*bsd*-gnu)
    case $cc_basename in
      KCC*)
    # Kuck and Associates, Inc. (KAI) C++ Compiler

    # KCC will only create a shared library if the output file
    # ends with ".so" (or ".sl" for HP-UX), so rename the library
    # to its proper name (with version) after linking.
    archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
    archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
    # Commands to make compiler produce verbose output that lists
    # what "hidden" libraries, object files and flags are used when
    # linking a shared library.
    #
    # There doesn't appear to be a way to prevent this compiler from
    # explicitly linking system object files so we need to strip them
    # from the output so that they don't get included in the library
    # dependencies.
    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'

    hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir'
    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'

    # Archives containing C++ object files must be created using
    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
    old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
    ;;
      icpc*)
    # Intel C++
    with_gnu_ld=yes
    # version 8.0 and above of icpc choke on multiply defined symbols
    # if we add $predep_objects and $postdep_objects, however 7.1 and
    # earlier do not add the objects themselves.
    case `$CC -V 2>&1` in
    *"Version 7."*)
      archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
      archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
      ;;
    *)  # Version 8.0 or newer
      tmp_idyn=
      case $host_cpu in
        ia64*) tmp_idyn=' -i_dynamic';;
      esac
      archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
      archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
      ;;
    esac
    archive_cmds_need_lc_CXX=no
    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
    whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
    ;;
      pgCC* | pgcpp*)
        # Portland Group C++ compiler
    archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
    archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'

    hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
    whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
        ;;
      cxx*)
    # Compaq C++
    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
    archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'

    runpath_var=LD_RUN_PATH
    hardcode_libdir_flag_spec_CXX='-rpath $libdir'
    hardcode_libdir_separator_CXX=:

    # Commands to make compiler produce verbose output that lists
    # what "hidden" libraries, object files and flags are used when
    # linking a shared library.
    #
    # There doesn't appear to be a way to prevent this compiler from
    # explicitly linking system object files so we need to strip them
    # from the output so that they don't get included in the library
    # dependencies.
    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
    ;;
      *)
    case `$CC -V 2>&1 | sed 5q` in
    *Sun\ C*)
      # Sun C++ 5.9
      no_undefined_flag_CXX=' -zdefs'
      archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
      archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
      hardcode_libdir_flag_spec_CXX='-R$libdir'
      whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'

      # Not sure whether something based on
      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
      # would be better.
      output_verbose_link_cmd='echo'

      # Archives containing C++ object files must be created using
      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
      # necessary to make sure instantiated templates are included
      # in the archive.
      old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
      ;;
    esac
    ;;
    esac
    ;;
  lynxos*)
    # FIXME: insert proper C++ library support
    ld_shlibs_CXX=no
    ;;
  m88k*)
    # FIXME: insert proper C++ library support
    ld_shlibs_CXX=no
    ;;
  mvs*)
    case $cc_basename in
      cxx*)
    # FIXME: insert proper C++ library support
    ld_shlibs_CXX=no
    ;;
      *)
    # FIXME: insert proper C++ library support
    ld_shlibs_CXX=no
    ;;
    esac
    ;;
  netbsd*)
    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
      archive_cmds_CXX='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
      wlarc=
      hardcode_libdir_flag_spec_CXX='-R$libdir'
      hardcode_direct_CXX=yes
      hardcode_shlibpath_var_CXX=no
    fi
    # Workaround some broken pre-1.5 toolchains
    output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
    ;;
  openbsd2*)
    # C++ shared libraries are fairly broken
    ld_shlibs_CXX=no
    ;;
  openbsd*)
    if test -f /usr/libexec/ld.so; then
      hardcode_direct_CXX=yes
      hardcode_shlibpath_var_CXX=no
      archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
      hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
    archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
    export_dynamic_flag_spec_CXX='${wl}-E'
    whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
      fi
      output_verbose_link_cmd='echo'
    else
      ld_shlibs_CXX=no
    fi
    ;;
  osf3*)
    case $cc_basename in
      KCC*)
    # Kuck and Associates, Inc. (KAI) C++ Compiler

    # KCC will only create a shared library if the output file
    # ends with ".so" (or ".sl" for HP-UX), so rename the library
    # to its proper name (with version) after linking.
    archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'

    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
    hardcode_libdir_separator_CXX=:

    # Archives containing C++ object files must be created using
    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
    old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'

    ;;
      RCC*)
    # Rational C++ 2.4.1
    # FIXME: insert proper C++ library support
    ld_shlibs_CXX=no
    ;;
      cxx*)
    allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
    archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'

    hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
    hardcode_libdir_separator_CXX=:

    # Commands to make compiler produce verbose output that lists
    # what "hidden" libraries, object files and flags are used when
    # linking a shared library.
    #
    # There doesn't appear to be a way to prevent this compiler from
    # explicitly linking system object files so we need to strip them
    # from the output so that they don't get included in the library
    # dependencies.
    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
    ;;
      *)
    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
      allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
      archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'

      hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
      hardcode_libdir_separator_CXX=:

      # Commands to make compiler produce verbose output that lists
      # what "hidden" libraries, object files and flags are used when
      # linking a shared library.
      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'

    else
      # FIXME: insert proper C++ library support
      ld_shlibs_CXX=no
    fi
    ;;
    esac
    ;;
  osf4* | osf5*)
    case $cc_basename in
      KCC*)
    # Kuck and Associates, Inc. (KAI) C++ Compiler

    # KCC will only create a shared library if the output file
    # ends with ".so" (or ".sl" for HP-UX), so rename the library
    # to its proper name (with version) after linking.
    archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'

    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
    hardcode_libdir_separator_CXX=:

    # Archives containing C++ object files must be created using
    # the KAI C++ compiler.
    old_archive_cmds_CXX='$CC -o $oldlib $oldobjs'
    ;;
      RCC*)
    # Rational C++ 2.4.1
    # FIXME: insert proper C++ library support
    ld_shlibs_CXX=no
    ;;
      cxx*)
    allow_undefined_flag_CXX=' -expect_unresolved \*'
    archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
    archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
      echo "-hidden">> $lib.exp~
      $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version  $verstring` -update_registry ${output_objdir}/so_locations -o $lib~
      $rm $lib.exp'

    hardcode_libdir_flag_spec_CXX='-rpath $libdir'
    hardcode_libdir_separator_CXX=:

    # Commands to make compiler produce verbose output that lists
    # what "hidden" libraries, object files and flags are used when
    # linking a shared library.
    #
    # There doesn't appear to be a way to prevent this compiler from
    # explicitly linking system object files so we need to strip them
    # from the output so that they don't get included in the library
    # dependencies.
    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
    ;;
      *)
    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
      allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
     archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'

      hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
      hardcode_libdir_separator_CXX=:

      # Commands to make compiler produce verbose output that lists
      # what "hidden" libraries, object files and flags are used when
      # linking a shared library.
      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'

    else
      # FIXME: insert proper C++ library support
      ld_shlibs_CXX=no
    fi
    ;;
    esac
    ;;
  psos*)
    # FIXME: insert proper C++ library support
    ld_shlibs_CXX=no
    ;;
  sunos4*)
    case $cc_basename in
      CC*)
    # Sun C++ 4.x
    # FIXME: insert proper C++ library support
    ld_shlibs_CXX=no
    ;;
      lcc*)
    # Lucid
    # FIXME: insert proper C++ library support
    ld_shlibs_CXX=no
    ;;
      *)
    # FIXME: insert proper C++ library support
    ld_shlibs_CXX=no
    ;;
    esac
    ;;
  solaris*)
    case $cc_basename in
      CC*)
    # Sun C++ 4.2, 5.x and Centerline C++
        archive_cmds_need_lc_CXX=yes
    no_undefined_flag_CXX=' -zdefs'
    archive_cmds_CXX='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
    archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
    $CC -G${allow_undefined_flag}  ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'

    hardcode_libdir_flag_spec_CXX='-R$libdir'
    hardcode_shlibpath_var_CXX=no
    case $host_os in
      solaris2.[0-5] | solaris2.[0-5].*) ;;
      *)
        # The compiler driver will combine and reorder linker options,
        # but understands `-z linker_flag'.
        # Supported since Solaris 2.6 (maybe 2.5.1?)
        whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
        ;;
    esac
    link_all_deplibs_CXX=yes

    output_verbose_link_cmd='echo'

    # Archives containing C++ object files must be created using
    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
    # necessary to make sure instantiated templates are included
    # in the archive.
    old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
    ;;
      gcx*)
    # Green Hills C++ Compiler
    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'

    # The C++ compiler must be used to create the archive.
    old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
    ;;
      *)
    # GNU C++ compiler with Solaris linker
    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
      no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
      if $CC --version | grep -v '^2\.7' > /dev/null; then
        archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
        archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
        $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'

        # Commands to make compiler produce verbose output that lists
        # what "hidden" libraries, object files and flags are used when
        # linking a shared library.
        output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
      else
        # g++ 2.7 appears to require `-G' NOT `-shared' on this
        # platform.
        archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
        archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
        $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'

        # Commands to make compiler produce verbose output that lists
        # what "hidden" libraries, object files and flags are used when
        # linking a shared library.
        output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
      fi

      hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
      case $host_os in
      solaris2.[0-5] | solaris2.[0-5].*) ;;
      *)
        whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
        ;;
      esac
    fi
    ;;
    esac
    ;;
  sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
    no_undefined_flag_CXX='${wl}-z,text'
    archive_cmds_need_lc_CXX=no
    hardcode_shlibpath_var_CXX=no
    runpath_var='LD_RUN_PATH'

    case $cc_basename in
      CC*)
    archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
    archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
    ;;
      *)
    archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
    archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
    ;;
    esac
    ;;
  sysv5* | sco3.2v5* | sco5v6*)
    # Note: We can NOT use -z defs as we might desire, because we do not
    # link with -lc, and that would cause any symbols used from libc to
    # always be unresolved, which means just about no library would
    # ever link correctly.  If we're not using GNU ld we use -z text
    # though, which does catch some bad symbols but isn't as heavy-handed
    # as -z defs.
    # For security reasons, it is highly recommended that you always
    # use absolute paths for naming shared libraries, and exclude the
    # DT_RUNPATH tag from executables and libraries.  But doing so
    # requires that you compile everything twice, which is a pain.
    # So that behaviour is only enabled if SCOABSPATH is set to a
    # non-empty value in the environment.  Most likely only useful for
    # creating official distributions of packages.
    # This is a hack until libtool officially supports absolute path
    # names for shared libraries.
    no_undefined_flag_CXX='${wl}-z,text'
    allow_undefined_flag_CXX='${wl}-z,nodefs'
    archive_cmds_need_lc_CXX=no
    hardcode_shlibpath_var_CXX=no
    hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
    hardcode_libdir_separator_CXX=':'
    link_all_deplibs_CXX=yes
    export_dynamic_flag_spec_CXX='${wl}-Bexport'
    runpath_var='LD_RUN_PATH'

    case $cc_basename in
      CC*)
    archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
    archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
    ;;
      *)
    archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
    archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
    ;;
    esac
    ;;
  tandem*)
    case $cc_basename in
      NCC*)
    # NonStop-UX NCC 3.20
    # FIXME: insert proper C++ library support
    ld_shlibs_CXX=no
    ;;
      *)
    # FIXME: insert proper C++ library support
    ld_shlibs_CXX=no
    ;;
    esac
    ;;
  vxworks*)
    # FIXME: insert proper C++ library support
    ld_shlibs_CXX=no
    ;;
  *)
    # FIXME: insert proper C++ library support
    ld_shlibs_CXX=no
    ;;
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
$as_echo "$ld_shlibs_CXX" >&6; }
test "$ld_shlibs_CXX" = no && can_build_shared=no

GCC_CXX="$GXX"
LD_CXX="$LD"

## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
cat > conftest.$ac_ext <<EOF
class Foo
{
public:
  Foo (void) { a = 0; }
private:
  int a;
};
EOF

if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; }; then
  # Parse the compiler output and extract the necessary
  # objects, libraries and library flags.

  # Sentinel used to keep track of whether or not we are before
  # the conftest object file.
  pre_test_object_deps_done=no

  # The `*' in the case matches for architectures that use `case' in
  # $output_verbose_cmd can trigger glob expansion during the loop
  # eval without this substitution.
  output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`

  for p in `eval $output_verbose_link_cmd`; do
    case $p in

    -L* | -R* | -l*)
       # Some compilers place space between "-{L,R}" and the path.
       # Remove the space.
       if test $p = "-L" \
      || test $p = "-R"; then
     prev=$p
     continue
       else
     prev=
       fi

       if test "$pre_test_object_deps_done" = no; then
     case $p in
     -L* | -R*)
       # Internal compiler library paths should come after those
       # provided the user.  The postdeps already come after the
       # user supplied libs so there is no need to process them.
       if test -z "$compiler_lib_search_path_CXX"; then
         compiler_lib_search_path_CXX="${prev}${p}"
       else
         compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
       fi
       ;;
     # The "-l" case would never come before the object being
     # linked, so don't bother handling this case.
     esac
       else
     if test -z "$postdeps_CXX"; then
       postdeps_CXX="${prev}${p}"
     else
       postdeps_CXX="${postdeps_CXX} ${prev}${p}"
     fi
       fi
       ;;

    *.$objext)
       # This assumes that the test object file only shows up
       # once in the compiler output.
       if test "$p" = "conftest.$objext"; then
     pre_test_object_deps_done=yes
     continue
       fi

       if test "$pre_test_object_deps_done" = no; then
     if test -z "$predep_objects_CXX"; then
       predep_objects_CXX="$p"
     else
       predep_objects_CXX="$predep_objects_CXX $p"
     fi
       else
     if test -z "$postdep_objects_CXX"; then
       postdep_objects_CXX="$p"
     else
       postdep_objects_CXX="$postdep_objects_CXX $p"
     fi
       fi
       ;;

    *) ;; # Ignore the rest.

    esac
  done

  # Clean up.
  rm -f a.out a.exe
else
  echo "libtool.m4: error: problem compiling CXX test program"
fi

$rm -f confest.$objext

compiler_lib_search_dirs_CXX=
if test -n "$compiler_lib_search_path_CXX"; then
  compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
fi

# PORTME: override above test on systems where it is broken
case $host_os in
interix[3-9]*)
  # Interix 3.5 installs completely hosed .la files for C++, so rather than
  # hack all around it, let's just trust "g++" to DTRT.
  predep_objects_CXX=
  postdep_objects_CXX=
  postdeps_CXX=
  ;;

linux*)
  case `$CC -V 2>&1 | sed 5q` in
  *Sun\ C*)
    # Sun C++ 5.9
    #
    # The more standards-conforming stlport4 library is
    # incompatible with the Cstd library. Avoid specifying
    # it if it's in CXXFLAGS. Ignore libCrun as
    # -library=stlport4 depends on it.
    case " $CXX $CXXFLAGS " in
    *" -library=stlport4 "*)
      solaris_use_stlport4=yes
      ;;
    esac
    if test "$solaris_use_stlport4" != yes; then
      postdeps_CXX='-library=Cstd -library=Crun'
    fi
    ;;
  esac
  ;;

solaris*)
  case $cc_basename in
  CC*)
    # The more standards-conforming stlport4 library is
    # incompatible with the Cstd library. Avoid specifying
    # it if it's in CXXFLAGS. Ignore libCrun as
    # -library=stlport4 depends on it.
    case " $CXX $CXXFLAGS " in
    *" -library=stlport4 "*)
      solaris_use_stlport4=yes
      ;;
    esac

    # Adding this requires a known-good setup of shared libraries for
    # Sun compiler versions before 5.6, else PIC objects from an old
    # archive will be linked into the output, leading to subtle bugs.
    if test "$solaris_use_stlport4" != yes; then
      postdeps_CXX='-library=Cstd -library=Crun'
    fi
    ;;
  esac
  ;;
esac

case " $postdeps_CXX " in
*" -lc "*) archive_cmds_need_lc_CXX=no ;;
esac

lt_prog_compiler_wl_CXX=
lt_prog_compiler_pic_CXX=
lt_prog_compiler_static_CXX=

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
$as_echo_n "checking for $compiler option to produce PIC... " >&6; }

  # C++ specific cases for pic, static, wl, etc.
  if test "$GXX" = yes; then
    lt_prog_compiler_wl_CXX='-Wl,'
    lt_prog_compiler_static_CXX='-static'

    case $host_os in
    aix*)
      # All AIX code is PIC.
      if test "$host_cpu" = ia64; then
    # AIX 5 now supports IA64 processor
    lt_prog_compiler_static_CXX='-Bstatic'
      fi
      ;;
    amigaos*)
      # FIXME: we need at least 68020 code to build shared libraries, but
      # adding the `-m68020' flag to GCC prevents building anything better,
      # like `-m68040'.
      lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
      ;;
    beos* | haiku* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
      # PIC is the default for these OSes.
      ;;
    mingw* | cygwin* | os2* | pw32*)
      # This hack is so that the source file can tell whether it is being
      # built for inclusion in a dll (and should export symbols for example).
      # Although the cygwin gcc ignores -fPIC, still need this for old-style
      # (--disable-auto-import) libraries
      lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
      ;;
    darwin* | rhapsody*)
      # PIC is the default on this platform
      # Common symbols not allowed in MH_DYLIB files
      lt_prog_compiler_pic_CXX='-fno-common'
      ;;
    *djgpp*)
      # DJGPP does not support shared libraries at all
      lt_prog_compiler_pic_CXX=
      ;;
    interix[3-9]*)
      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
      # Instead, we relocate shared libraries at runtime.
      ;;
    sysv4*MP*)
      if test -d /usr/nec; then
    lt_prog_compiler_pic_CXX=-Kconform_pic
      fi
      ;;
    hpux*)
      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
      # not for PA HP-UX.
      case $host_cpu in
      hppa*64*|ia64*)
    ;;
      *)
    lt_prog_compiler_pic_CXX='-fPIC'
    ;;
      esac
      ;;
    *)
      lt_prog_compiler_pic_CXX='-fPIC'
      ;;
    esac
  else
    case $host_os in
      aix[4-9]*)
    # All AIX code is PIC.
    if test "$host_cpu" = ia64; then
      # AIX 5 now supports IA64 processor
      lt_prog_compiler_static_CXX='-Bstatic'
    else
      lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
    fi
    ;;
      chorus*)
    case $cc_basename in
    cxch68*)
      # Green Hills C++ Compiler
      # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
      ;;
    esac
    ;;
       darwin*)
         # PIC is the default on this platform
         # Common symbols not allowed in MH_DYLIB files
         case $cc_basename in
           xlc*)
           lt_prog_compiler_pic_CXX='-qnocommon'
           lt_prog_compiler_wl_CXX='-Wl,'
           ;;
         esac
       ;;
      dgux*)
    case $cc_basename in
      ec++*)
        lt_prog_compiler_pic_CXX='-KPIC'
        ;;
      ghcx*)
        # Green Hills C++ Compiler
        lt_prog_compiler_pic_CXX='-pic'
        ;;
      *)
        ;;
    esac
    ;;
      freebsd* | dragonfly*)
    # FreeBSD uses GNU C++
    ;;
      hpux9* | hpux10* | hpux11*)
    case $cc_basename in
      CC*)
        lt_prog_compiler_wl_CXX='-Wl,'
        lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
        if test "$host_cpu" != ia64; then
          lt_prog_compiler_pic_CXX='+Z'
        fi
        ;;
      aCC*)
        lt_prog_compiler_wl_CXX='-Wl,'
        lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
        case $host_cpu in
        hppa*64*|ia64*)
          # +Z the default
          ;;
        *)
          lt_prog_compiler_pic_CXX='+Z'
          ;;
        esac
        ;;
      *)
        ;;
    esac
    ;;
      interix*)
    # This is c89, which is MS Visual C++ (no shared libs)
    # Anyone wants to do a port?
    ;;
      irix5* | irix6* | nonstopux*)
    case $cc_basename in
      CC*)
        lt_prog_compiler_wl_CXX='-Wl,'
        lt_prog_compiler_static_CXX='-non_shared'
        # CC pic flag -KPIC is the default.
        ;;
      *)
        ;;
    esac
    ;;
      linux* | k*bsd*-gnu)
    case $cc_basename in
      KCC*)
        # KAI C++ Compiler
        lt_prog_compiler_wl_CXX='--backend -Wl,'
        lt_prog_compiler_pic_CXX='-fPIC'
        ;;
      ecpc*)
        # old Intel C++ for x86_64 which still supported -KPIC.
        lt_prog_compiler_wl_CXX='-Wl,'
        lt_prog_compiler_pic_CXX='-KPIC'
        lt_prog_compiler_static_CXX='-static'
        ;;
      icpc*)
        # Intel C++, used to be incompatible with GCC.
        lt_prog_compiler_wl_CXX='-Wl,'
        lt_prog_compiler_pic_CXX='-fPIC'
        lt_prog_compiler_static_CXX='-static'
        ;;
      pgCC* | pgcpp*)
        # Portland Group C++ compiler.
        lt_prog_compiler_wl_CXX='-Wl,'
        lt_prog_compiler_pic_CXX='-fpic'
        lt_prog_compiler_static_CXX='-Bstatic'
        ;;
      cxx*)
        # Compaq C++
        # Make sure the PIC flag is empty.  It appears that all Alpha
        # Linux and Compaq Tru64 Unix objects are PIC.
        lt_prog_compiler_pic_CXX=
        lt_prog_compiler_static_CXX='-non_shared'
        ;;
      *)
        case `$CC -V 2>&1 | sed 5q` in
        *Sun\ C*)
          # Sun C++ 5.9
          lt_prog_compiler_pic_CXX='-KPIC'
          lt_prog_compiler_static_CXX='-Bstatic'
          lt_prog_compiler_wl_CXX='-Qoption ld '
          ;;
        esac
        ;;
    esac
    ;;
      lynxos*)
    ;;
      m88k*)
    ;;
      mvs*)
    case $cc_basename in
      cxx*)
        lt_prog_compiler_pic_CXX='-W c,exportall'
        ;;
      *)
        ;;
    esac
    ;;
      netbsd*)
    ;;
      osf3* | osf4* | osf5*)
    case $cc_basename in
      KCC*)
        lt_prog_compiler_wl_CXX='--backend -Wl,'
        ;;
      RCC*)
        # Rational C++ 2.4.1
        lt_prog_compiler_pic_CXX='-pic'
        ;;
      cxx*)
        # Digital/Compaq C++
        lt_prog_compiler_wl_CXX='-Wl,'
        # Make sure the PIC flag is empty.  It appears that all Alpha
        # Linux and Compaq Tru64 Unix objects are PIC.
        lt_prog_compiler_pic_CXX=
        lt_prog_compiler_static_CXX='-non_shared'
        ;;
      *)
        ;;
    esac
    ;;
      psos*)
    ;;
      solaris*)
    case $cc_basename in
      CC*)
        # Sun C++ 4.2, 5.x and Centerline C++
        lt_prog_compiler_pic_CXX='-KPIC'
        lt_prog_compiler_static_CXX='-Bstatic'
        lt_prog_compiler_wl_CXX='-Qoption ld '
        ;;
      gcx*)
        # Green Hills C++ Compiler
        lt_prog_compiler_pic_CXX='-PIC'
        ;;
      *)
        ;;
    esac
    ;;
      sunos4*)
    case $cc_basename in
      CC*)
        # Sun C++ 4.x
        lt_prog_compiler_pic_CXX='-pic'
        lt_prog_compiler_static_CXX='-Bstatic'
        ;;
      lcc*)
        # Lucid
        lt_prog_compiler_pic_CXX='-pic'
        ;;
      *)
        ;;
    esac
    ;;
      tandem*)
    case $cc_basename in
      NCC*)
        # NonStop-UX NCC 3.20
        lt_prog_compiler_pic_CXX='-KPIC'
        ;;
      *)
        ;;
    esac
    ;;
      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
    case $cc_basename in
      CC*)
        lt_prog_compiler_wl_CXX='-Wl,'
        lt_prog_compiler_pic_CXX='-KPIC'
        lt_prog_compiler_static_CXX='-Bstatic'
        ;;
    esac
    ;;
      vxworks*)
    ;;
      *)
    lt_prog_compiler_can_build_shared_CXX=no
    ;;
    esac
  fi

{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic_CXX" >&5
$as_echo "$lt_prog_compiler_pic_CXX" >&6; }

#
# Check to make sure the PIC flag actually works.
#
if test -n "$lt_prog_compiler_pic_CXX"; then

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; }
if ${lt_cv_prog_compiler_pic_works_CXX+:} false; then :
  $as_echo_n "(cached) " >&6
else
  lt_cv_prog_compiler_pic_works_CXX=no
  ac_outfile=conftest.$ac_objext
   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
   lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
   # Insert the option either (1) after the last *FLAGS variable, or
   # (2) before a word containing "conftest.", or (3) at the end.
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   # The option is referenced via a variable to avoid confusing sed.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"configure:13015: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>conftest.err)
   ac_status=$?
   cat conftest.err >&5
   echo "configure:13019: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s "$ac_outfile"; then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings other than the usual output.
     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
       lt_cv_prog_compiler_pic_works_CXX=yes
     fi
   fi
   $rm conftest*

fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; }

if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then
    case $lt_prog_compiler_pic_CXX in
     "" | " "*) ;;
     *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
     esac
else
    lt_prog_compiler_pic_CXX=
     lt_prog_compiler_can_build_shared_CXX=no
fi

fi
case $host_os in
  # For platforms which do not support PIC, -DPIC is meaningless:
  *djgpp*)
    lt_prog_compiler_pic_CXX=
    ;;
  *)
    lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
    ;;
esac

#
# Check to make sure the static flag actually works.
#
wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
if ${lt_cv_prog_compiler_static_works_CXX+:} false; then :
  $as_echo_n "(cached) " >&6
else
  lt_cv_prog_compiler_static_works_CXX=no
   save_LDFLAGS="$LDFLAGS"
   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
   echo "$lt_simple_link_test_code" > conftest.$ac_ext
   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
     # The linker can only warn and ignore the option if not recognized
     # So say no if there are warnings
     if test -s conftest.err; then
       # Append any errors to the config.log.
       cat conftest.err 1>&5
       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
       if diff conftest.exp conftest.er2 >/dev/null; then
         lt_cv_prog_compiler_static_works_CXX=yes
       fi
     else
       lt_cv_prog_compiler_static_works_CXX=yes
     fi
   fi
   $rm -r conftest*
   LDFLAGS="$save_LDFLAGS"

fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5
$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; }

if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then
    :
else
    lt_prog_compiler_static_CXX=
fi

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
if ${lt_cv_prog_compiler_c_o_CXX+:} false; then :
  $as_echo_n "(cached) " >&6
else
  lt_cv_prog_compiler_c_o_CXX=no
   $rm -r conftest 2>/dev/null
   mkdir conftest
   cd conftest
   mkdir out
   echo "$lt_simple_compile_test_code" > conftest.$ac_ext

   lt_compiler_flag="-o out/conftest2.$ac_objext"
   # Insert the option either (1) after the last *FLAGS variable, or
   # (2) before a word containing "conftest.", or (3) at the end.
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"configure:13119: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>out/conftest.err)
   ac_status=$?
   cat out/conftest.err >&5
   echo "configure:13123: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s out/conftest2.$ac_objext
   then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
       lt_cv_prog_compiler_c_o_CXX=yes
     fi
   fi
   chmod u+w . 2>&5
   $rm conftest*
   # SGI C++ compiler will create directory out/ii_files/ for
   # template instantiation
   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
   $rm out/* && rmdir out
   cd ..
   rmdir conftest
   $rm conftest*

fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }

hard_links="nottested"
if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
  # do not overwrite the value of need_locks provided by the user
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
$as_echo_n "checking if we can lock with hard links... " >&6; }
  hard_links=yes
  $rm conftest*
  ln conftest.a conftest.b 2>/dev/null && hard_links=no
  touch conftest.a
  ln conftest.a conftest.b 2>&5 || hard_links=no
  ln conftest.a conftest.b 2>/dev/null && hard_links=no
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
$as_echo "$hard_links" >&6; }
  if test "$hard_links" = no; then
    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5
$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;}
    need_locks=warn
  fi
else
  need_locks=no
fi

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }

  export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
  case $host_os in
  aix[4-9]*)
    # If we're using GNU nm, then we don't want the "-C" option.
    # -C means demangle to AIX nm, but means don't demangle with GNU nm
    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
    else
      export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
    fi
    ;;
  pw32*)
    export_symbols_cmds_CXX="$ltdll_cmds"
  ;;
  cygwin* | mingw*)
    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
  ;;
  *)
    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
  ;;
  esac
  exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'

{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
$as_echo "$ld_shlibs_CXX" >&6; }
test "$ld_shlibs_CXX" = no && can_build_shared=no

#
# Do we need to explicitly link libc?
#
case "x$archive_cmds_need_lc_CXX" in
x|xyes)
  # Assume -lc should be added
  archive_cmds_need_lc_CXX=yes

  if test "$enable_shared" = yes && test "$GCC" = yes; then
    case $archive_cmds_CXX in
    *'~'*)
      # FIXME: we may have to deal with multi-command sequences.
      ;;
    '$CC '*)
      # Test whether the compiler implicitly links with -lc since on some
      # systems, -lgcc has to come before -lc. If gcc already passes -lc
      # to ld, don't add -lc before -lgcc.
      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
      $rm conftest*
      echo "$lt_simple_compile_test_code" > conftest.$ac_ext

      if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; } 2>conftest.err; then
        soname=conftest
        lib=conftest
        libobjs=conftest.$ac_objext
        deplibs=
        wl=$lt_prog_compiler_wl_CXX
    pic_flag=$lt_prog_compiler_pic_CXX
        compiler_flags=-v
        linker_flags=-v
        verstring=
        output_objdir=.
        libname=conftest
        lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
        allow_undefined_flag_CXX=
        if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\""; } >&5
  (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; }
        then
      archive_cmds_need_lc_CXX=no
        else
      archive_cmds_need_lc_CXX=yes
        fi
        allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
      else
        cat conftest.err 1>&5
      fi
      $rm conftest*
      { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc_CXX" >&5
$as_echo "$archive_cmds_need_lc_CXX" >&6; }
      ;;
    esac
  fi
  ;;
esac

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
$as_echo_n "checking dynamic linker characteristics... " >&6; }
library_names_spec=
libname_spec='lib$name'
soname_spec=
shrext_cmds=".so"
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
finish_eval=
shlibpath_var=
shlibpath_overrides_runpath=unknown
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"

need_lib_prefix=unknown
hardcode_into_libs=no

# when you set need_version to no, make sure it does not cause -set_version
# flags to be left without arguments
need_version=unknown

case $host_os in
aix3*)
  version_type=linux
  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
  shlibpath_var=LIBPATH

  # AIX 3 has no versioning support, so we append a major version to the name.
  soname_spec='${libname}${release}${shared_ext}$major'
  ;;

aix[4-9]*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  hardcode_into_libs=yes
  if test "$host_cpu" = ia64; then
    # AIX 5 supports IA64
    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
    shlibpath_var=LD_LIBRARY_PATH
  else
    # With GCC up to 2.95.x, collect2 would create an import file
    # for dependence libraries.  The import file would start with
    # the line `#! .'.  This would cause the generated library to
    # depend on `.', always an invalid library.  This was fixed in
    # development snapshots of GCC prior to 3.0.
    case $host_os in
      aix4 | aix4.[01] | aix4.[01].*)
      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
       echo ' yes '
       echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
    :
      else
    can_build_shared=no
      fi
      ;;
    esac
    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
    # soname into executable. Probably we can add versioning support to
    # collect2, so additional links can be useful in future.
    if test "$aix_use_runtimelinking" = yes; then
      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
      # instead of lib<name>.a to let people know that these are not
      # typical AIX shared libraries.
      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
    else
      # We preserve .a as extension for shared libraries through AIX4.2
      # and later when we are not doing run time linking.
      library_names_spec='${libname}${release}.a $libname.a'
      soname_spec='${libname}${release}${shared_ext}$major'
    fi
    shlibpath_var=LIBPATH
  fi
  ;;

amigaos*)
  library_names_spec='$libname.ixlibrary $libname.a'
  # Create ${libname}_ixlibrary.a entries in /sys/libs.
  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
  ;;

beos*)
  library_names_spec='${libname}${shared_ext}'
  dynamic_linker="$host_os ld.so"
  shlibpath_var=LIBRARY_PATH
  ;;

haiku*)
  # Since haiku provides gcc, use GNU style here
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
  soname_spec='${libname}${release}${shared_ext}$major'
  shlibpath_var=LIBRARY_PATH
  hardcode_into_libs=yes
  ;;

bsdi[45]*)
  version_type=linux
  need_version=no
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
  soname_spec='${libname}${release}${shared_ext}$major'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
  # the default ld.so.conf also contains /usr/contrib/lib and
  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
  # libtool to hard-code these into programs
  ;;

cygwin* | mingw* | pw32*)
  version_type=windows
  shrext_cmds=".dll"
  need_version=no
  need_lib_prefix=no

  case $GCC,$host_os in
  yes,cygwin* | yes,mingw* | yes,pw32*)
    library_names_spec='$libname.dll.a'
    # DLL is installed to $(libdir)/../bin by postinstall_cmds
    postinstall_cmds='base_file=`basename \${file}`~
      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
      dldir=$destdir/`dirname \$dlpath`~
      test -d \$dldir || mkdir -p \$dldir~
      $install_prog $dir/$dlname \$dldir/$dlname~
      chmod a+x \$dldir/$dlname'
    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
      dlpath=$dir/\$dldll~
       $rm \$dlpath'
    shlibpath_overrides_runpath=yes

    case $host_os in
    cygwin*)
      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
      ;;
    mingw*)
      # MinGW DLLs use traditional 'lib' prefix
      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
        # It is most probably a Windows format PATH printed by
        # mingw gcc, but we are running on Cygwin. Gcc prints its search
        # path with ; separators, and with drive letters. We can handle the
        # drive letters (cygwin fileutils understands them), so leave them,
        # especially as we might pass files found there to a mingw objdump,
        # which wouldn't understand a cygwinified path. Ahh.
        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
      else
        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
      fi
      ;;
    pw32*)
      # pw32 DLLs use 'pw' prefix rather than 'lib'
      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
      ;;
    esac
    ;;

  *)
    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
    ;;
  esac
  dynamic_linker='Win32 ld.exe'
  # FIXME: first we should search . and the directory the executable is in
  shlibpath_var=PATH
  ;;

darwin* | rhapsody*)
  dynamic_linker="$host_os dyld"
  version_type=darwin
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
  soname_spec='${libname}${release}${major}$shared_ext'
  shlibpath_overrides_runpath=yes
  shlibpath_var=DYLD_LIBRARY_PATH
  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'

  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
  ;;

dgux*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
  soname_spec='${libname}${release}${shared_ext}$major'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

freebsd* | dragonfly*)
  # DragonFly does not have aout.  When/if they implement a new
  # versioning mechanism, adjust this.
  if test -x /usr/bin/objformat; then
    objformat=`/usr/bin/objformat`
  else
    case $host_os in
    freebsd[123].*) objformat=aout ;;
    *) objformat=elf ;;
    esac
  fi
  version_type=freebsd-$objformat
  case $version_type in
    freebsd-elf*)
      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
      need_version=no
      need_lib_prefix=no
      ;;
    freebsd-*)
      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
      need_version=yes
      ;;
  esac
  shlibpath_var=LD_LIBRARY_PATH
  case $host_os in
  freebsd2*)
    shlibpath_overrides_runpath=yes
    ;;
  freebsd3.[01]* | freebsdelf3.[01]*)
    shlibpath_overrides_runpath=yes
    hardcode_into_libs=yes
    ;;
  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
    shlibpath_overrides_runpath=no
    hardcode_into_libs=yes
    ;;
  *) # from 4.6 on, and DragonFly
    shlibpath_overrides_runpath=yes
    hardcode_into_libs=yes
    ;;
  esac
  ;;

gnu*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
  soname_spec='${libname}${release}${shared_ext}$major'
  shlibpath_var=LD_LIBRARY_PATH
  hardcode_into_libs=yes
  ;;

hpux9* | hpux10* | hpux11*)
  # Give a soname corresponding to the major version so that dld.sl refuses to
  # link against other versions.
  version_type=sunos
  need_lib_prefix=no
  need_version=no
  case $host_cpu in
  ia64*)
    shrext_cmds='.so'
    hardcode_into_libs=yes
    dynamic_linker="$host_os dld.so"
    shlibpath_var=LD_LIBRARY_PATH
    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
    soname_spec='${libname}${release}${shared_ext}$major'
    if test "X$HPUX_IA64_MODE" = X32; then
      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
    else
      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
    fi
    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
    ;;
   hppa*64*)
     shrext_cmds='.sl'
     hardcode_into_libs=yes
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
     soname_spec='${libname}${release}${shared_ext}$major'
     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
   *)
    shrext_cmds='.sl'
    dynamic_linker="$host_os dld.sl"
    shlibpath_var=SHLIB_PATH
    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
    soname_spec='${libname}${release}${shared_ext}$major'
    ;;
  esac
  # HP-UX runs *really* slowly unless shared libraries are mode 555.
  postinstall_cmds='chmod 555 $lib'
  ;;

interix[3-9]*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
  soname_spec='${libname}${release}${shared_ext}$major'
  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=no
  hardcode_into_libs=yes
  ;;

irix5* | irix6* | nonstopux*)
  case $host_os in
    nonstopux*) version_type=nonstopux ;;
    *)
    if test "$lt_cv_prog_gnu_ld" = yes; then
        version_type=linux
    else
        version_type=irix
    fi ;;
  esac
  need_lib_prefix=no
  need_version=no
  soname_spec='${libname}${release}${shared_ext}$major'
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
  case $host_os in
  irix5* | nonstopux*)
    libsuff= shlibsuff=
    ;;
  *)
    case $LD in # libtool.m4 will add one of these switches to LD
    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
      libsuff= shlibsuff= libmagic=32-bit;;
    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
      libsuff=32 shlibsuff=N32 libmagic=N32;;
    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
      libsuff=64 shlibsuff=64 libmagic=64-bit;;
    *) libsuff= shlibsuff= libmagic=never-match;;
    esac
    ;;
  esac
  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
  shlibpath_overrides_runpath=no
  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
  hardcode_into_libs=yes
  ;;

# No shared lib support for Linux oldld, aout, or coff.
linux*oldld* | linux*aout* | linux*coff*)
  dynamic_linker=no
  ;;

# This must be Linux ELF.
linux* | k*bsd*-gnu)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
  soname_spec='${libname}${release}${shared_ext}$major'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=no
  # This implies no fast_install, which is unacceptable.
  # Some rework will be needed to allow for fast_install
  # before this can be enabled.
  hardcode_into_libs=yes

  # Append ld.so.conf contents to the search path
  if test -f /etc/ld.so.conf; then
    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[  ]*hwcap[    ]/d;s/[:,   ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
  fi

  # We used to test for /lib/ld.so.1 and disable shared libraries on
  # powerpc, because MkLinux only supported shared libraries with the
  # GNU dynamic linker.  Since this was broken with cross compilers,
  # most powerpc-linux boxes support dynamic linking these days and
  # people can always --disable-shared, the test was removed, and we
  # assume the GNU/Linux dynamic linker is in use.
  dynamic_linker='GNU/Linux ld.so'
  ;;

netbsd*)
  version_type=sunos
  need_lib_prefix=no
  need_version=no
  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
    dynamic_linker='NetBSD (a.out) ld.so'
  else
    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
    soname_spec='${libname}${release}${shared_ext}$major'
    dynamic_linker='NetBSD ld.elf_so'
  fi
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  hardcode_into_libs=yes
  ;;

newsos6)
  version_type=linux
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  ;;

nto-qnx*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
  soname_spec='${libname}${release}${shared_ext}$major'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  ;;

openbsd*)
  version_type=sunos
  sys_lib_dlsearch_path_spec="/usr/lib"
  need_lib_prefix=no
  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
  case $host_os in
    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
    *)                         need_version=no  ;;
  esac
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
    case $host_os in
      openbsd2.[89] | openbsd2.[89].*)
    shlibpath_overrides_runpath=no
    ;;
      *)
    shlibpath_overrides_runpath=yes
    ;;
      esac
  else
    shlibpath_overrides_runpath=yes
  fi
  ;;

os2*)
  libname_spec='$name'
  shrext_cmds=".dll"
  need_lib_prefix=no
  library_names_spec='$libname${shared_ext} $libname.a'
  dynamic_linker='OS/2 ld.exe'
  shlibpath_var=LIBPATH
  ;;

osf3* | osf4* | osf5*)
  version_type=osf
  need_lib_prefix=no
  need_version=no
  soname_spec='${libname}${release}${shared_ext}$major'
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
  shlibpath_var=LD_LIBRARY_PATH
  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
  ;;

rdos*)
  dynamic_linker=no
  ;;

solaris*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
  soname_spec='${libname}${release}${shared_ext}$major'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  hardcode_into_libs=yes
  # ldd complains unless libraries are executable
  postinstall_cmds='chmod +x $lib'
  ;;

sunos4*)
  version_type=sunos
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  if test "$with_gnu_ld" = yes; then
    need_lib_prefix=no
  fi
  need_version=yes
  ;;

sysv4 | sysv4.3*)
  version_type=linux
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
  soname_spec='${libname}${release}${shared_ext}$major'
  shlibpath_var=LD_LIBRARY_PATH
  case $host_vendor in
    sni)
      shlibpath_overrides_runpath=no
      need_lib_prefix=no
      export_dynamic_flag_spec='${wl}-Blargedynsym'
      runpath_var=LD_RUN_PATH
      ;;
    siemens)
      need_lib_prefix=no
      ;;
    motorola)
      need_lib_prefix=no
      need_version=no
      shlibpath_overrides_runpath=no
      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
      ;;
  esac
  ;;

sysv4*MP*)
  if test -d /usr/nec ;then
    version_type=linux
    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
    soname_spec='$libname${shared_ext}.$major'
    shlibpath_var=LD_LIBRARY_PATH
  fi
  ;;

sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
  version_type=freebsd-elf
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
  soname_spec='${libname}${release}${shared_ext}$major'
  shlibpath_var=LD_LIBRARY_PATH
  hardcode_into_libs=yes
  if test "$with_gnu_ld" = yes; then
    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
    shlibpath_overrides_runpath=no
  else
    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
    shlibpath_overrides_runpath=yes
    case $host_os in
      sco3.2v5*)
        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
    ;;
    esac
  fi
  sys_lib_dlsearch_path_spec='/usr/lib'
  ;;

uts4*)
  version_type=linux
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
  soname_spec='${libname}${release}${shared_ext}$major'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

*)
  dynamic_linker=no
  ;;
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
$as_echo "$dynamic_linker" >&6; }
test "$dynamic_linker" = no && can_build_shared=no

if ${lt_cv_sys_lib_search_path_spec+:} false; then :
  $as_echo_n "(cached) " >&6
else
  lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
fi

sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
if ${lt_cv_sys_lib_dlsearch_path_spec+:} false; then :
  $as_echo_n "(cached) " >&6
else
  lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
fi

sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"

variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
if test "$GCC" = yes; then
  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
hardcode_action_CXX=
if test -n "$hardcode_libdir_flag_spec_CXX" || \
   test -n "$runpath_var_CXX" || \
   test "X$hardcode_automatic_CXX" = "Xyes" ; then

  # We can hardcode non-existent directories.
  if test "$hardcode_direct_CXX" != no &&
     # If the only mechanism to avoid hardcoding is shlibpath_var, we
     # have to relink, otherwise we might link with an installed library
     # when we should be linking with a yet-to-be-installed one
     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
     test "$hardcode_minus_L_CXX" != no; then
    # Linking always hardcodes the temporary library directory.
    hardcode_action_CXX=relink
  else
    # We can link without hardcoding, and we can hardcode nonexisting dirs.
    hardcode_action_CXX=immediate
  fi
else
  # We cannot hardcode anything, or else we can only hardcode existing
  # directories.
  hardcode_action_CXX=unsupported
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5
$as_echo "$hardcode_action_CXX" >&6; }

if test "$hardcode_action_CXX" = relink; then
  # Fast installation is not supported
  enable_fast_install=no
elif test "$shlibpath_overrides_runpath" = yes ||
     test "$enable_shared" = no; then
  # Fast installation is not necessary
  enable_fast_install=needless
fi

# The else clause should only fire when bootstrapping the
# libtool distribution, otherwise you forgot to ship ltmain.sh
# with your package, and you will get complaints that there are
# no rules to generate ltmain.sh.
if test -f "$ltmain"; then
  # See if we are running on zsh, and set the options which allow our commands through
  # without removal of \ escapes.
  if test -n "${ZSH_VERSION+set}" ; then
    setopt NO_GLOB_SUBST
  fi
  # Now quote all the things that may contain metacharacters while being
  # careful not to overquote the AC_SUBSTed values.  We take copies of the
  # variables and quote the copies for generation of the libtool script.
  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
    SED SHELL STRIP \
    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
    deplibs_check_method reload_flag reload_cmds need_locks \
    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
    lt_cv_sys_global_symbol_to_c_name_address \
    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
    old_postinstall_cmds old_postuninstall_cmds \
    compiler_CXX \
    CC_CXX \
    LD_CXX \
    lt_prog_compiler_wl_CXX \
    lt_prog_compiler_pic_CXX \
    lt_prog_compiler_static_CXX \
    lt_prog_compiler_no_builtin_flag_CXX \
    export_dynamic_flag_spec_CXX \
    thread_safe_flag_spec_CXX \
    whole_archive_flag_spec_CXX \
    enable_shared_with_static_runtimes_CXX \
    old_archive_cmds_CXX \
    old_archive_from_new_cmds_CXX \
    predep_objects_CXX \
    postdep_objects_CXX \
    predeps_CXX \
    postdeps_CXX \
    compiler_lib_search_path_CXX \
    compiler_lib_search_dirs_CXX \
    archive_cmds_CXX \
    archive_expsym_cmds_CXX \
    postinstall_cmds_CXX \
    postuninstall_cmds_CXX \
    old_archive_from_expsyms_cmds_CXX \
    allow_undefined_flag_CXX \
    no_undefined_flag_CXX \
    export_symbols_cmds_CXX \
    hardcode_libdir_flag_spec_CXX \
    hardcode_libdir_flag_spec_ld_CXX \
    hardcode_libdir_separator_CXX \
    hardcode_automatic_CXX \
    module_cmds_CXX \
    module_expsym_cmds_CXX \
    lt_cv_prog_compiler_c_o_CXX \
    fix_srcfile_path_CXX \
    exclude_expsyms_CXX \
    include_expsyms_CXX; do

    case $var in
    old_archive_cmds_CXX | \
    old_archive_from_new_cmds_CXX | \
    archive_cmds_CXX | \
    archive_expsym_cmds_CXX | \
    module_cmds_CXX | \
    module_expsym_cmds_CXX | \
    old_archive_from_expsyms_cmds_CXX | \
    export_symbols_cmds_CXX | \
    extract_expsyms_cmds | reload_cmds | finish_cmds | \
    postinstall_cmds | postuninstall_cmds | \
    old_postinstall_cmds | old_postuninstall_cmds | \
    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
      # Double-quote double-evaled strings.
      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
      ;;
    *)
      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
      ;;
    esac
  done

  case $lt_echo in
  *'\$0 --fallback-echo"')
    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
    ;;
  esac

cfgfile="$ofile"

  cat <<__EOF__ >> "$cfgfile"
# ### BEGIN LIBTOOL TAG CONFIG: $tagname

# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:

# Shell to use when invoking shell scripts.
SHELL=$lt_SHELL

# Whether or not to build shared libraries.
build_libtool_libs=$enable_shared

# Whether or not to build static libraries.
build_old_libs=$enable_static

# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=$archive_cmds_need_lc_CXX

# Whether or not to disallow shared libs when runtime libs are static
allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX

# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install

# The host system.
host_alias=$host_alias
host=$host
host_os=$host_os

# The build system.
build_alias=$build_alias
build=$build
build_os=$build_os

# An echo program that does not interpret backslashes.
echo=$lt_echo

# The archiver.
AR=$lt_AR
AR_FLAGS=$lt_AR_FLAGS

# A C compiler.
LTCC=$lt_LTCC

# LTCC compiler flags.
LTCFLAGS=$lt_LTCFLAGS

# A language-specific compiler.
CC=$lt_compiler_CXX

# Is the compiler the GNU C compiler?
with_gcc=$GCC_CXX

# An ERE matcher.
EGREP=$lt_EGREP

# The linker used to build libraries.
LD=$lt_LD_CXX

# Whether we need hard or soft links.
LN_S=$lt_LN_S

# A BSD-compatible nm program.
NM=$lt_NM

# A symbol stripping program
STRIP=$lt_STRIP

# Used to examine libraries when file_magic_cmd begins "file"
MAGIC_CMD=$MAGIC_CMD

# Used on cygwin: DLL creation program.
DLLTOOL="$DLLTOOL"

# Used on cygwin: object dumper.
OBJDUMP="$OBJDUMP"

# Used on cygwin: assembler.
AS="$AS"

# The name of the directory that contains temporary libtool files.
objdir=$objdir

# How to create reloadable object files.
reload_flag=$lt_reload_flag
reload_cmds=$lt_reload_cmds

# How to pass a linker flag through the compiler.
wl=$lt_lt_prog_compiler_wl_CXX

# Object file suffix (normally "o").
objext="$ac_objext"

# Old archive suffix (normally "a").
libext="$libext"

# Shared library suffix (normally ".so").
shrext_cmds='$shrext_cmds'

# Executable file suffix (normally "").
exeext="$exeext"

# Additional compiler flags for building library objects.
pic_flag=$lt_lt_prog_compiler_pic_CXX
pic_mode=$pic_mode

# What is the maximum length of a command?
max_cmd_len=$lt_cv_sys_max_cmd_len

# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX

# Must we lock files when doing compilation?
need_locks=$lt_need_locks

# Do we need the lib prefix for modules?
need_lib_prefix=$need_lib_prefix

# Do we need a version for libraries?
need_version=$need_version

# Whether dlopen is supported.
dlopen_support=$enable_dlopen

# Whether dlopen of programs is supported.
dlopen_self=$enable_dlopen_self

# Whether dlopen of statically linked programs is supported.
dlopen_self_static=$enable_dlopen_self_static

# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_lt_prog_compiler_static_CXX

# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX

# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX

# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX

# Compiler flag to generate thread-safe objects.
thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX

# Library versioning type.
version_type=$version_type

# Format of library name prefix.
libname_spec=$lt_libname_spec

# List of archive names.  First name is the real one, the rest are links.
# The last name is the one that the linker finds with -lNAME.
library_names_spec=$lt_library_names_spec

# The coded name of the library, if different from the real name.
soname_spec=$lt_soname_spec

# Commands used to build and install an old-style archive.
RANLIB=$lt_RANLIB
old_archive_cmds=$lt_old_archive_cmds_CXX
old_postinstall_cmds=$lt_old_postinstall_cmds
old_postuninstall_cmds=$lt_old_postuninstall_cmds

# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX

# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX

# Commands used to build and install a shared archive.
archive_cmds=$lt_archive_cmds_CXX
archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
postinstall_cmds=$lt_postinstall_cmds
postuninstall_cmds=$lt_postuninstall_cmds

# Commands used to build a loadable module (assumed same as above if empty)
module_cmds=$lt_module_cmds_CXX
module_expsym_cmds=$lt_module_expsym_cmds_CXX

# Commands to strip libraries.
old_striplib=$lt_old_striplib
striplib=$lt_striplib

# Dependencies to place before the objects being linked to create a
# shared library.
predep_objects=$lt_predep_objects_CXX

# Dependencies to place after the objects being linked to create a
# shared library.
postdep_objects=$lt_postdep_objects_CXX

# Dependencies to place before the objects being linked to create a
# shared library.
predeps=$lt_predeps_CXX

# Dependencies to place after the objects being linked to create a
# shared library.
postdeps=$lt_postdeps_CXX

# The directories searched by this compiler when creating a shared
# library
compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX

# The library search path used internally by the compiler when linking
# a shared library.
compiler_lib_search_path=$lt_compiler_lib_search_path_CXX

# Method to check whether dependent libraries are shared objects.
deplibs_check_method=$lt_deplibs_check_method

# Command to use when deplibs_check_method == file_magic.
file_magic_cmd=$lt_file_magic_cmd

# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=$lt_allow_undefined_flag_CXX

# Flag that forces no undefined symbols.
no_undefined_flag=$lt_no_undefined_flag_CXX

# Commands used to finish a libtool library installation in a directory.
finish_cmds=$lt_finish_cmds

# Same as above, but a single script fragment to be evaled but not shown.
finish_eval=$lt_finish_eval

# Take the output of nm and produce a listing of raw symbols and C names.
global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe

# Transform the output of nm in a proper C declaration
global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl

# Transform the output of nm in a C name address pair
global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address

# This is the shared library runtime path variable.
runpath_var=$runpath_var

# This is the shared library path variable.
shlibpath_var=$shlibpath_var

# Is shlibpath searched before the hard-coded library search path?
shlibpath_overrides_runpath=$shlibpath_overrides_runpath

# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action_CXX

# Whether we should hardcode library paths into libraries.
hardcode_into_libs=$hardcode_into_libs

# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist.
hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX

# If ld is used when linking, flag to hardcode \$libdir into
# a binary during linking. This must work even if \$libdir does
# not exist.
hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX

# Whether we need a single -rpath flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX

# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
# resulting binary.
hardcode_direct=$hardcode_direct_CXX

# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
# resulting binary.
hardcode_minus_L=$hardcode_minus_L_CXX

# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
# the resulting binary.
hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX

# Set to yes if building a shared library automatically hardcodes DIR into the library
# and all subsequent libraries and executables linked against it.
hardcode_automatic=$hardcode_automatic_CXX

# Variables whose values should be saved in libtool wrapper scripts and
# restored at relink time.
variables_saved_for_relink="$variables_saved_for_relink"

# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs_CXX

# Compile-time system search path for libraries
sys_lib_search_path_spec=$lt_sys_lib_search_path_spec

# Run-time system search path for libraries
sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec

# Fix the shell variable \$srcfile for the compiler.
fix_srcfile_path=$lt_fix_srcfile_path

# Set to yes if exported symbols are required.
always_export_symbols=$always_export_symbols_CXX

# The commands to list exported symbols.
export_symbols_cmds=$lt_export_symbols_cmds_CXX

# The commands to extract the exported symbol list from a shared archive.
extract_expsyms_cmds=$lt_extract_expsyms_cmds

# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=$lt_exclude_expsyms_CXX

# Symbols that must always be exported.
include_expsyms=$lt_include_expsyms_CXX

# ### END LIBTOOL TAG CONFIG: $tagname

__EOF__

else
  # If there is no Makefile yet, we rely on a make rule to execute
  # `config.status --recheck' to rerun these tests and create the
  # libtool script then.
  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
  if test -f "$ltmain_in"; then
    test -f Makefile && make "$ltmain"
  fi
fi

ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu

CC=$lt_save_CC
LDCXX=$LD
LD=$lt_save_LD
GCC=$lt_save_GCC
with_gnu_ldcxx=$with_gnu_ld
with_gnu_ld=$lt_save_with_gnu_ld
lt_cv_path_LDCXX=$lt_cv_path_LD
lt_cv_path_LD=$lt_save_path_LD
lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld

    else
      tagname=""
    fi
    ;;

      *)
    as_fn_error $? "Unsupported tag name: $tagname" "$LINENO" 5
    ;;
      esac

      # Append the new tag name to the list of available tags.
      if test -n "$tagname" ; then
      available_tags="$available_tags $tagname"
    fi
    fi
  done
  IFS="$lt_save_ifs"

  # Now substitute the updated list of available tags.
  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
    mv "${ofile}T" "$ofile"
    chmod +x "$ofile"
  else
    rm -f "${ofile}T"
    as_fn_error $? "unable to update list of available tagged configurations." "$LINENO" 5
  fi
fi

# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"

# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'

# Prevent multiple expansion

all_targets='$(PHP_MODULES) $(PHP_ZEND_EX)'
install_targets="install-modules install-headers"
phplibdir="`pwd`/modules"
CPPFLAGS="$CPPFLAGS -DHAVE_CONFIG_H"
CFLAGS_CLEAN='$(CFLAGS) -D_GNU_SOURCE'
CXXFLAGS_CLEAN='$(CXXFLAGS)'

test "$prefix" = "NONE" && prefix="/usr/local"
test "$exec_prefix" = "NONE" && exec_prefix='$(prefix)'

if test "$cross_compiling" = yes ; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for native build C compiler" >&5
$as_echo_n "checking for native build C compiler... " >&6; }
  for ac_prog in gcc clang c99 c89 cc cl
do
  # Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_BUILD_CC+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test -n "$BUILD_CC"; then
  ac_cv_prog_BUILD_CC="$BUILD_CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    for ac_exec_ext in '' $ac_executable_extensions; do
  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_BUILD_CC="$ac_prog"
    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
  done
IFS=$as_save_IFS

fi
fi
BUILD_CC=$ac_cv_prog_BUILD_CC
if test -n "$BUILD_CC"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_CC" >&5
$as_echo "$BUILD_CC" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi

  test -n "$BUILD_CC" && break
done
test -n "$BUILD_CC" || BUILD_CC="none"

  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_CC" >&5
$as_echo "$BUILD_CC" >&6; }
else
  BUILD_CC=$CC
fi

  PHP_VAR_SUBST="$PHP_VAR_SUBST PHP_MODULES"

  PHP_VAR_SUBST="$PHP_VAR_SUBST PHP_ZEND_EX"

  PHP_VAR_SUBST="$PHP_VAR_SUBST all_targets"

  PHP_VAR_SUBST="$PHP_VAR_SUBST install_targets"

  PHP_VAR_SUBST="$PHP_VAR_SUBST prefix"

  PHP_VAR_SUBST="$PHP_VAR_SUBST exec_prefix"

  PHP_VAR_SUBST="$PHP_VAR_SUBST libdir"

  PHP_VAR_SUBST="$PHP_VAR_SUBST prefix"

  PHP_VAR_SUBST="$PHP_VAR_SUBST phplibdir"

  PHP_VAR_SUBST="$PHP_VAR_SUBST phpincludedir"

  PHP_VAR_SUBST="$PHP_VAR_SUBST CC"

  PHP_VAR_SUBST="$PHP_VAR_SUBST CFLAGS"

  PHP_VAR_SUBST="$PHP_VAR_SUBST CFLAGS_CLEAN"

  PHP_VAR_SUBST="$PHP_VAR_SUBST CPP"

  PHP_VAR_SUBST="$PHP_VAR_SUBST CPPFLAGS"

  PHP_VAR_SUBST="$PHP_VAR_SUBST CXX"

  PHP_VAR_SUBST="$PHP_VAR_SUBST CXXFLAGS"

  PHP_VAR_SUBST="$PHP_VAR_SUBST CXXFLAGS_CLEAN"

  PHP_VAR_SUBST="$PHP_VAR_SUBST EXTENSION_DIR"

  PHP_VAR_SUBST="$PHP_VAR_SUBST PHP_EXECUTABLE"

  PHP_VAR_SUBST="$PHP_VAR_SUBST EXTRA_LDFLAGS"

  PHP_VAR_SUBST="$PHP_VAR_SUBST EXTRA_LIBS"

  PHP_VAR_SUBST="$PHP_VAR_SUBST INCLUDES"

  PHP_VAR_SUBST="$PHP_VAR_SUBST LFLAGS"

  PHP_VAR_SUBST="$PHP_VAR_SUBST LDFLAGS"

  PHP_VAR_SUBST="$PHP_VAR_SUBST SHARED_LIBTOOL"

  PHP_VAR_SUBST="$PHP_VAR_SUBST LIBTOOL"

  PHP_VAR_SUBST="$PHP_VAR_SUBST SHELL"

  PHP_VAR_SUBST="$PHP_VAR_SUBST INSTALL_HEADERS"

  PHP_VAR_SUBST="$PHP_VAR_SUBST BUILD_CC"

  $php_shtool mkdir -p $BUILD_DIR

  cat >Makefile <<EOF
srcdir = $abs_srcdir
builddir = $abs_builddir
top_srcdir = $abs_srcdir
top_builddir = $abs_builddir
EOF
  for i in $PHP_VAR_SUBST; do
    eval echo "$i = \$$i" >> Makefile
  done

  cat $abs_srcdir/build/Makefile.global Makefile.fragments Makefile.objects >> Makefile

test -d modules || $php_shtool mkdir modules

ac_config_headers="$ac_config_headers config.h"

cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs, see configure's option --config-cache.
# It is not useful on other systems.  If it contains results you don't
# want to keep, you may remove or edit it.
#
# config.status only pays attention to the cache file if you give it
# the --recheck option to rerun configure.
#
# `ac_cv_env_foo' variables (set or unset) will be overridden when
# loading this file, other *unset* `ac_cv_foo' will be assigned the
# following values.

_ACEOF

# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, we kill variables containing newlines.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(
  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
    eval ac_val=\$$ac_var
    case $ac_val in #(
    *${as_nl}*)
      case $ac_var in #(
      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
      esac
      case $ac_var in #(
      _ | IFS | as_nl) ;; #(
      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
      *) { eval $ac_var=; unset $ac_var;} ;;
      esac ;;
    esac
  done

  (set) 2>&1 |
    case $as_nl`(ac_space=' '; set) 2>&1` in #(
    *${as_nl}ac_space=\ *)
      # `set' does not quote correctly, so add quotes: double-quote
      # substitution turns \\\\ into \\, and sed turns \\ into \.
      sed -n \
    "s/'/'\\\\''/g;
      s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
      ;; #(
    *)
      # `set' quotes correctly as required by POSIX, so do not add quotes.
      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
      ;;
    esac |
    sort
) |
  sed '
     /^ac_cv_env_/b end
     t clear
     :clear
     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
     t end
     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
     :end' >>confcache
if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
  if test -w "$cache_file"; then
    if test "x$cache_file" != "x/dev/null"; then
      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
$as_echo "$as_me: updating cache $cache_file" >&6;}
      if test ! -f "$cache_file" || test -h "$cache_file"; then
    cat confcache >"$cache_file"
      else
        case $cache_file in #(
        */* | ?:*)
      mv -f confcache "$cache_file"$$ &&
      mv -f "$cache_file"$$ "$cache_file" ;; #(
        *)
      mv -f confcache "$cache_file" ;;
    esac
      fi
    fi
  else
    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
  fi
fi
rm -f confcache

test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

DEFS=-DHAVE_CONFIG_H

ac_libobjs=
ac_ltlibobjs=
U=
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
  # 1. Remove the extension, and $U if already installed.
  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
  #    will be set to the directory where LIBOBJS objects are built.
  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
done
LIBOBJS=$ac_libobjs

LTLIBOBJS=$ac_ltlibobjs

  { $as_echo "$as_me:${as_lineno-$LINENO}: patching config.h.in" >&5
$as_echo "$as_me: patching config.h.in" >&6;}

  $SED -e 's/^#undef PACKAGE_[^ ]*/\/\* & \*\//g' < $srcdir/config.h.in \
    > $srcdir/config.h.in.tmp && mv $srcdir/config.h.in.tmp $srcdir/config.h.in

: "${CONFIG_STATUS=./config.status}"
ac_write_fail=0
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
as_write_fail=0
cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
#! $SHELL
# Generated by $as_me.
# Run this file to recreate the current configuration.
# Compiler output produced by configure, useful for debugging
# configure, is in config.log if it exists.

debug=false
ac_cs_recheck=false
ac_cs_silent=false

SHELL=\${CONFIG_SHELL-$SHELL}
export SHELL
_ASEOF
cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
## -------------------- ##
## M4sh Initialization. ##
## -------------------- ##

# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
  emulate sh
  NULLCMD=:
  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
  # is contrary to our usage.  Disable this feature.
  alias -g '${1+"$@"}'='"$@"'
  setopt NO_GLOB_SUBST
else
  case `(set -o) 2>/dev/null` in #(
  *posix*) :
    set -o posix ;; #(
  *) :
     ;;
esac
fi

as_nl='
'
export as_nl
# Printing a long string crashes Solaris 7 /usr/bin/printf.
as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
# Prefer a ksh shell builtin over an external printf program on Solaris,
# but without wasting forks for bash or zsh.
if test -z "$BASH_VERSION$ZSH_VERSION" \
    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
  as_echo='print -r --'
  as_echo_n='print -rn --'
elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
  as_echo='printf %s\n'
  as_echo_n='printf %s'
else
  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
    as_echo_n='/usr/ucb/echo -n'
  else
    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
    as_echo_n_body='eval
      arg=$1;
      case $arg in #(
      *"$as_nl"*)
    expr "X$arg" : "X\\(.*\\)$as_nl";
    arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
      esac;
      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
    '
    export as_echo_n_body
    as_echo_n='sh -c $as_echo_n_body as_echo'
  fi
  export as_echo_body
  as_echo='sh -c $as_echo_body as_echo'
fi

# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
  PATH_SEPARATOR=:
  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
      PATH_SEPARATOR=';'
  }
fi

# IFS
# We need space, tab and new line, in precisely that order.  Quoting is
# there to prevent editors from complaining about space-tab.
# (If _AS_PATH_WALK were called with IFS unset, it would disable word
# splitting by setting IFS to empty value.)
IFS=" "" $as_nl"

# Find who we are.  Look in the path if we contain no directory separator.
as_myself=
case $0 in #((
  *[\\/]* ) as_myself=$0 ;;
  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
  done
IFS=$as_save_IFS

     ;;
esac
# We did not find ourselves, most probably we were run as `sh COMMAND'
# in which case we are not to be found in the path.
if test "x$as_myself" = x; then
  as_myself=$0
fi
if test ! -f "$as_myself"; then
  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
  exit 1
fi

# Unset variables that we do not need and which cause bugs (e.g. in
# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
# suppresses any "Segmentation fault" message there.  '((' could
# trigger a bug in pdksh 5.2.14.
for as_var in BASH_ENV ENV MAIL MAILPATH
do eval test x\${$as_var+set} = xset \
  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
done
PS1='$ '
PS2='> '
PS4='+ '

# NLS nuisances.
LC_ALL=C
export LC_ALL
LANGUAGE=C
export LANGUAGE

# CDPATH.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH

# as_fn_error STATUS ERROR [LINENO LOG_FD]
# ----------------------------------------
# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
# script with STATUS, using 1 if that was 0.
as_fn_error ()
{
  as_status=$1; test $as_status -eq 0 && as_status=1
  if test "$4"; then
    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
  fi
  $as_echo "$as_me: error: $2" >&2
  as_fn_exit $as_status
} # as_fn_error

# as_fn_set_status STATUS
# -----------------------
# Set $? to STATUS, without forking.
as_fn_set_status ()
{
  return $1
} # as_fn_set_status

# as_fn_exit STATUS
# -----------------
# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
as_fn_exit ()
{
  set +e
  as_fn_set_status $1
  exit $1
} # as_fn_exit

# as_fn_unset VAR
# ---------------
# Portably unset VAR.
as_fn_unset ()
{
  { eval $1=; unset $1;}
}
as_unset=as_fn_unset
# as_fn_append VAR VALUE
# ----------------------
# Append the text in VALUE to the end of the definition contained in VAR. Take
# advantage of any shell optimizations that allow amortized linear growth over
# repeated appends, instead of the typical quadratic growth present in naive
# implementations.
if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
  eval 'as_fn_append ()
  {
    eval $1+=\$2
  }'
else
  as_fn_append ()
  {
    eval $1=\$$1\$2
  }
fi # as_fn_append

# as_fn_arith ARG...
# ------------------
# Perform arithmetic evaluation on the ARGs, and store the result in the
# global $as_val. Take advantage of shells that can avoid forks. The arguments
# must be portable across $(()) and expr.
if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
  eval 'as_fn_arith ()
  {
    as_val=$(( $* ))
  }'
else
  as_fn_arith ()
  {
    as_val=`expr "$@" || test $? -eq 1`
  }
fi # as_fn_arith

if expr a : '\(a\)' >/dev/null 2>&1 &&
   test "X`expr 00001 : '.*\(...\)'`" = X001; then
  as_expr=expr
else
  as_expr=false
fi

if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
  as_basename=basename
else
  as_basename=false
fi

if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
  as_dirname=dirname
else
  as_dirname=false
fi

as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
     X"$0" : 'X\(//\)$' \| \
     X"$0" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X/"$0" |
    sed '/^.*\/\([^/][^/]*\)\/*$/{
        s//\1/
        q
      }
      /^X\/\(\/\/\)$/{
        s//\1/
        q
      }
      /^X\/\(\/\).*/{
        s//\1/
        q
      }
      s/.*/./; q'`

# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits

ECHO_C= ECHO_N= ECHO_T=
case `echo -n x` in #(((((
-n*)
  case `echo 'xy\c'` in
  *c*) ECHO_T='    ';;    # ECHO_T is single tab character.
  xy)  ECHO_C='\c';;
  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
       ECHO_T='    ';;
  esac;;
*)
  ECHO_N='-n';;
esac

rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
  rm -f conf$$.dir/conf$$.file
else
  rm -f conf$$.dir
  mkdir conf$$.dir 2>/dev/null
fi
if (echo >conf$$.file) 2>/dev/null; then
  if ln -s conf$$.file conf$$ 2>/dev/null; then
    as_ln_s='ln -s'
    # ... but there are two gotchas:
    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
    # In both cases, we have to default to `cp -pR'.
    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
      as_ln_s='cp -pR'
  elif ln conf$$.file conf$$ 2>/dev/null; then
    as_ln_s=ln
  else
    as_ln_s='cp -pR'
  fi
else
  as_ln_s='cp -pR'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null

# as_fn_mkdir_p
# -------------
# Create "$as_dir" as a directory, including parents if necessary.
as_fn_mkdir_p ()
{

  case $as_dir in #(
  -*) as_dir=./$as_dir;;
  esac
  test -d "$as_dir" || eval $as_mkdir_p || {
    as_dirs=
    while :; do
      case $as_dir in #(
      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
      *) as_qdir=$as_dir;;
      esac
      as_dirs="'$as_qdir' $as_dirs"
      as_dir=`$as_dirname -- "$as_dir" ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
     X"$as_dir" : 'X\(//\)[^/]' \| \
     X"$as_dir" : 'X\(//\)$' \| \
     X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$as_dir" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
        s//\1/
        q
      }
      /^X\(\/\/\)[^/].*/{
        s//\1/
        q
      }
      /^X\(\/\/\)$/{
        s//\1/
        q
      }
      /^X\(\/\).*/{
        s//\1/
        q
      }
      s/.*/./; q'`
      test -d "$as_dir" && break
    done
    test -z "$as_dirs" || eval "mkdir $as_dirs"
  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"

} # as_fn_mkdir_p
if mkdir -p . 2>/dev/null; then
  as_mkdir_p='mkdir -p "$as_dir"'
else
  test -d ./-p && rmdir ./-p
  as_mkdir_p=false
fi

# as_fn_executable_p FILE
# -----------------------
# Test if FILE is an executable regular file.
as_fn_executable_p ()
{
  test -f "$1" && test -x "$1"
} # as_fn_executable_p
as_test_x='test -x'
as_executable_p=as_fn_executable_p

# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"

# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"

exec 6>&1
## ----------------------------------- ##
## Main body of $CONFIG_STATUS script. ##
## ----------------------------------- ##
_ASEOF
test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1

cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# Save the log message, to keep $0 and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
This file was extended by $as_me, which was
generated by GNU Autoconf 2.69.  Invocation command line was

  CONFIG_FILES    = $CONFIG_FILES
  CONFIG_HEADERS  = $CONFIG_HEADERS
  CONFIG_LINKS    = $CONFIG_LINKS
  CONFIG_COMMANDS = $CONFIG_COMMANDS
  $ $0 $@

on `(hostname || uname -n) 2>/dev/null | sed 1q`
"

_ACEOF

case $ac_config_headers in *"
"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
esac

cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
# Files that config.status was made for.
config_headers="$ac_config_headers"

_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
ac_cs_usage="\
\`$as_me' instantiates files and other configuration actions
from templates according to the current configuration.  Unless the files
and actions are specified as TAGs, all are instantiated by default.

Usage: $0 [OPTION]... [TAG]...

  -h, --help       print this help, then exit
  -V, --version    print version number and configuration settings, then exit
      --config     print configuration, then exit
  -q, --quiet, --silent
                   do not print progress messages
  -d, --debug      don't remove temporary files
      --recheck    update $as_me by reconfiguring in the same conditions
      --header=FILE[:TEMPLATE]
                   instantiate the configuration header FILE

Configuration headers:
$config_headers

Report bugs to the package provider."

_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
config.status
configured by $0, generated by GNU Autoconf 2.69,
  with options \\"\$ac_cs_config\\"

Copyright (C) 2012 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."

ac_pwd='$ac_pwd'
srcdir='$srcdir'
test -n "\$AWK" || AWK=awk
_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# The default lists apply if the user does not specify any file.
ac_need_defaults=:
while test $# != 0
do
  case $1 in
  --*=?*)
    ac_option=`expr "X$1" : 'X\([^=]*\)='`
    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
    ac_shift=:
    ;;
  --*=)
    ac_option=`expr "X$1" : 'X\([^=]*\)='`
    ac_optarg=
    ac_shift=:
    ;;
  *)
    ac_option=$1
    ac_optarg=$2
    ac_shift=shift
    ;;
  esac

  case $ac_option in
  # Handling of the options.
  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
    ac_cs_recheck=: ;;
  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
    $as_echo "$ac_cs_version"; exit ;;
  --config | --confi | --conf | --con | --co | --c )
    $as_echo "$ac_cs_config"; exit ;;
  --debug | --debu | --deb | --de | --d | -d )
    debug=: ;;
  --header | --heade | --head | --hea )
    $ac_shift
    case $ac_optarg in
    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
    esac
    as_fn_append CONFIG_HEADERS " '$ac_optarg'"
    ac_need_defaults=false;;
  --he | --h)
    # Conflict between --help and --header
    as_fn_error $? "ambiguous option: \`$1'
Try \`$0 --help' for more information.";;
  --help | --hel | -h )
    $as_echo "$ac_cs_usage"; exit ;;
  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
  | -silent | --silent | --silen | --sile | --sil | --si | --s)
    ac_cs_silent=: ;;

  # This is an error.
  -*) as_fn_error $? "unrecognized option: \`$1'
Try \`$0 --help' for more information." ;;

  *) as_fn_append ac_config_targets " $1"
     ac_need_defaults=false ;;

  esac
  shift
done

ac_configure_extra_args=

if $ac_cs_silent; then
  exec 6>/dev/null
  ac_configure_extra_args="$ac_configure_extra_args --silent"
fi

_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
if \$ac_cs_recheck; then
  set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
  shift
  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
  CONFIG_SHELL='$SHELL'
  export CONFIG_SHELL
  exec "\$@"
fi

_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
exec 5>>config.log
{
  echo
  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
## Running $as_me. ##
_ASBOX
  $as_echo "$ac_log"
} >&5

_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1

# Handling of arguments.
for ac_config_target in $ac_config_targets
do
  case $ac_config_target in
    "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;

  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
  esac
done

# If the user did not use the arguments to specify the items to instantiate,
# then the envvar interface is used.  Set only those that are not.
# We use the long form for the default assignment because of an extremely
# bizarre bug on SunOS 4.1.3.
if $ac_need_defaults; then
  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
fi

# Have a temporary directory for convenience.  Make it in the build tree
# simply because there is no reason against having it here, and in addition,
# creating and moving files from /tmp can sometimes cause problems.
# Hook for its removal unless debugging.
# Note that there is a small window in which the directory will not be cleaned:
# after its creation but before its name has been assigned to `$tmp'.
$debug ||
{
  tmp= ac_tmp=
  trap 'exit_status=$?
  : "${ac_tmp:=$tmp}"
  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
' 0
  trap 'as_fn_exit 1' 1 2 13 15
}
# Create a (secure) tmp directory for tmp files.

{
  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
  test -d "$tmp"
}  ||
{
  tmp=./conf$$-$RANDOM
  (umask 077 && mkdir "$tmp")
} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
ac_tmp=$tmp

# Set up the scripts for CONFIG_HEADERS section.
# No need to generate them if there are no CONFIG_HEADERS.
# This happens for instance with `./config.status Makefile'.
if test -n "$CONFIG_HEADERS"; then
cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
BEGIN {
_ACEOF

# Transform confdefs.h into an awk script `defines.awk', embedded as
# here-document in config.status, that substitutes the proper values into
# config.h.in to produce config.h.

# Create a delimiter string that does not exist in confdefs.h, to ease
# handling of long lines.
ac_delim='%!_!# '
for ac_last_try in false false :; do
  ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
  if test -z "$ac_tt"; then
    break
  elif $ac_last_try; then
    as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
  else
    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
  fi
done

# For the awk script, D is an array of macro values keyed by name,
# likewise P contains macro parameters if any.  Preserve backslash
# newline sequences.

ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
sed -n '
s/.\{148\}/&'"$ac_delim"'/g
t rset
:rset
s/^[     ]*#[    ]*define[   ][  ]*/ /
t def
d
:def
s/\\$//
t bsnl
s/["\\]/\\&/g
s/^ \('"$ac_word_re"'\)\(([^()]*)\)[     ]*\(.*\)/P["\1"]="\2"\
D["\1"]=" \3"/p
s/^ \('"$ac_word_re"'\)[     ]*\(.*\)/D["\1"]=" \2"/p
d
:bsnl
s/["\\]/\\&/g
s/^ \('"$ac_word_re"'\)\(([^()]*)\)[     ]*\(.*\)/P["\1"]="\2"\
D["\1"]=" \3\\\\\\n"\\/p
t cont
s/^ \('"$ac_word_re"'\)[     ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
t cont
d
:cont
n
s/.\{148\}/&'"$ac_delim"'/g
t clear
:clear
s/\\$//
t bsnlc
s/["\\]/\\&/g; s/^/"/; s/$/"/p
d
:bsnlc
s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
b cont
' <confdefs.h | sed '
s/'"$ac_delim"'/"\\\
"/g' >>$CONFIG_STATUS || ac_write_fail=1

cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
  for (key in D) D_is_set[key] = 1
  FS = ""
}
/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
  line = \$ 0
  split(line, arg, " ")
  if (arg[1] == "#") {
    defundef = arg[2]
    mac1 = arg[3]
  } else {
    defundef = substr(arg[1], 2)
    mac1 = arg[2]
  }
  split(mac1, mac2, "(") #)
  macro = mac2[1]
  prefix = substr(line, 1, index(line, defundef) - 1)
  if (D_is_set[macro]) {
    # Preserve the white space surrounding the "#".
    print prefix "define", macro P[macro] D[macro]
    next
  } else {
    # Replace #undef with comments.  This is necessary, for example,
    # in the case of _POSIX_SOURCE, which is predefined and required
    # on some systems where configure will not decide to define it.
    if (defundef == "undef") {
      print "/*", prefix defundef, macro, "*/"
      next
    }
  }
}
{ print }
_ACAWK
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
  as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
fi # test -n "$CONFIG_HEADERS"

eval set X "    :H $CONFIG_HEADERS    "
shift
for ac_tag
do
  case $ac_tag in
  :[FHLC]) ac_mode=$ac_tag; continue;;
  esac
  case $ac_mode$ac_tag in
  :[FHL]*:*);;
  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
  :[FH]-) ac_tag=-:-;;
  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
  esac
  ac_save_IFS=$IFS
  IFS=:
  set x $ac_tag
  IFS=$ac_save_IFS
  shift
  ac_file=$1
  shift

  case $ac_mode in
  :L) ac_source=$1;;
  :[FH])
    ac_file_inputs=
    for ac_f
    do
      case $ac_f in
      -) ac_f="$ac_tmp/stdin";;
      *) # Look for the file first in the build tree, then in the source tree
     # (if the path is not absolute).  The absolute path cannot be DOS-style,
     # because $ac_f cannot contain `:'.
     test -f "$ac_f" ||
       case $ac_f in
       [\\/$]*) false;;
       *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
       esac ||
       as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
      esac
      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
      as_fn_append ac_file_inputs " '$ac_f'"
    done

    # Let's still pretend it is `configure' which instantiates (i.e., don't
    # use $as_me), people would be surprised to read:
    #    /* config.h.  Generated by config.status.  */
    configure_input='Generated from '`
      $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
    `' by configure.'
    if test x"$ac_file" != x-; then
      configure_input="$ac_file.  $configure_input"
      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
$as_echo "$as_me: creating $ac_file" >&6;}
    fi
    # Neutralize special characters interpreted by sed in replacement strings.
    case $configure_input in #(
    *\&* | *\|* | *\\* )
       ac_sed_conf_input=`$as_echo "$configure_input" |
       sed 's/[\\\\&|]/\\\\&/g'`;; #(
    *) ac_sed_conf_input=$configure_input;;
    esac

    case $ac_tag in
    *:-:* | *:-) cat >"$ac_tmp/stdin" \
      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
    esac
    ;;
  esac

  ac_dir=`$as_dirname -- "$ac_file" ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
     X"$ac_file" : 'X\(//\)[^/]' \| \
     X"$ac_file" : 'X\(//\)$' \| \
     X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$ac_file" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
        s//\1/
        q
      }
      /^X\(\/\/\)[^/].*/{
        s//\1/
        q
      }
      /^X\(\/\/\)$/{
        s//\1/
        q
      }
      /^X\(\/\).*/{
        s//\1/
        q
      }
      s/.*/./; q'`
  as_dir="$ac_dir"; as_fn_mkdir_p
  ac_builddir=.

case "$ac_dir" in
.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
*)
  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
  # A ".." for each directory in $ac_dir_suffix.
  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
  case $ac_top_builddir_sub in
  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
  esac ;;
esac
ac_abs_top_builddir=$ac_pwd
ac_abs_builddir=$ac_pwd$ac_dir_suffix
# for backward compatibility:
ac_top_builddir=$ac_top_build_prefix

case $srcdir in
  .)  # We are building in place.
    ac_srcdir=.
    ac_top_srcdir=$ac_top_builddir_sub
    ac_abs_top_srcdir=$ac_pwd ;;
  [\\/]* | ?:[\\/]* )  # Absolute name.
    ac_srcdir=$srcdir$ac_dir_suffix;
    ac_top_srcdir=$srcdir
    ac_abs_top_srcdir=$srcdir ;;
  *) # Relative name.
    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
    ac_top_srcdir=$ac_top_build_prefix$srcdir
    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix

  case $ac_mode in

  :H)
  #
  # CONFIG_HEADER
  #
  if test x"$ac_file" != x-; then
    {
      $as_echo "/* $configure_input  */" \
      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
    } >"$ac_tmp/config.h" \
      || as_fn_error $? "could not create $ac_file" "$LINENO" 5
    if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
      { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
$as_echo "$as_me: $ac_file is unchanged" >&6;}
    else
      rm -f "$ac_file"
      mv "$ac_tmp/config.h" "$ac_file" \
    || as_fn_error $? "could not create $ac_file" "$LINENO" 5
    fi
  else
    $as_echo "/* $configure_input  */" \
      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
      || as_fn_error $? "could not create -" "$LINENO" 5
  fi
 ;;

  esac

done # for ac_tag

as_fn_exit 0
_ACEOF
ac_clean_files=$ac_clean_files_save

test $ac_write_fail = 0 ||
  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5

# configure is writing to config.log, and then calls config.status.
# config.status does its own redirection, appending to config.log.
# Unfortunately, on DOS this fails, as config.log is still kept open
# by configure, so config.status won't be able to write to it; its
# output is simply discarded.  So we exec the FD to /dev/null,
# effectively closing config.log, so it can be properly (re)opened and
# appended to by config.status.  When coming back to configure, we
# need to make the FD available again.
if test "$no_create" != yes; then
  ac_cs_success=:
  ac_config_status_args=
  test "$silent" = yes &&
    ac_config_status_args="$ac_config_status_args --quiet"
  exec 5>/dev/null
  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
  exec 5>>config.log
  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
  # would make configure fail if this is the last instruction.
  $ac_cs_success || as_fn_exit 1
fi
if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
fi

configure.m4

if test -z "$SED"; then
  PHP_PDO_OCI_SED="sed";
else
  PHP_PDO_OCI_SED="$SED";
fi

PHP_PDO_OCI_TAIL1=`echo a | tail -n1 2>/dev/null`
if test "$PHP_PDO_OCI_TAIL1" = "a"; then
    PHP_PDO_OCI_TAIL1="tail -n1"
else
    PHP_PDO_OCI_TAIL1="tail -1"
fi

AC_DEFUN([AC_PDO_OCI_VERSION],[
  AC_MSG_CHECKING([Oracle version])
  PDO_OCI_LCS_BASE=$PDO_OCI_LIB_DIR/libclntsh.$SHLIB_SUFFIX_NAME
  dnl Oracle 10g, 11g, 12c etc
  PDO_OCI_LCS=`ls $PDO_OCI_LCS_BASE.*.1 2> /dev/null | $PHP_PDO_OCI_TAIL1`
  if test -f "$PDO_OCI_LCS"; then
    dnl Oracle 10g, 11g 12c etc. The x.2 version libraries are named x.1 for
    dnl drop in compatibility
    PDO_OCI_VERSION=`echo $PDO_OCI_LCS | $PHP_PDO_OCI_SED -e 's/.*\.\(.*\)\.1$/\1.1/'`
      elif test -f $PDO_OCI_DIR/lib/libclntsh.$SHLIB_SUFFIX_NAME.11.2; then
    PDO_OCI_VERSION=11.2    
  elif test -f $PDO_OCI_LCS_BASE.9.0; then
    dnl There is no case for Oracle 9.2. Oracle 9.2 libraries have a 9.0 suffix
    dnl for drop-in compatibility with Oracle 9.0
    PDO_OCI_VERSION=9.0
  else
    PDO_OCI_VERSION=11.2   
  fi
  AC_MSG_RESULT($PDO_OCI_VERSION)
])

AC_DEFUN([AC_PDO_OCI_CHECK_LIB_DIR],[
  AC_CHECK_SIZEOF([long])
  AC_MSG_CHECKING([if we're at 64-bit platform])
  AS_IF([test "$ac_cv_sizeof_long" -eq 4],[
    AC_MSG_RESULT([no])
    TMP_PDO_OCI_LIB_DIR="$PDO_OCI_DIR/lib32"
  ],[
    AC_MSG_RESULT([yes])
    TMP_PDO_OCI_LIB_DIR="$PDO_OCI_DIR/lib"
  ])

  AC_MSG_CHECKING([OCI8 libraries dir])
  if test -d "$PDO_OCI_DIR/lib" && test ! -d "$PDO_OCI_DIR/lib32"; then
    PDO_OCI_LIB_DIR="$PDO_OCI_DIR/lib"
  elif test ! -d "$PDO_OCI_DIR/lib" && test -d "$PDO_OCI_DIR/lib32"; then
    PDO_OCI_LIB_DIR="$PDO_OCI_DIR/lib32"
  elif test -d "$PDO_OCI_DIR/lib" && test -d "$PDO_OCI_DIR/lib32"; then
    PDO_OCI_LIB_DIR=$TMP_PDO_OCI_LIB_DIR
  else
    AC_MSG_ERROR([Oracle required OCI8 libraries not found])
  fi
  AC_MSG_RESULT($PDO_OCI_LIB_DIR)
])

PHP_ARG_WITH([pdo-oci],
  [Oracle OCI support for PDO],
  [AS_HELP_STRING([[--with-pdo-oci[=DIR]]],
    [PDO: Oracle OCI support. DIR defaults to $ORACLE_HOME. Use
    --with-pdo-oci=instantclient,/path/to/instant/client/lib for an Oracle
    Instant Client installation.])])

if test "$PHP_PDO_OCI" != "no"; then

  if test "$PHP_PDO" = "no" && test "$ext_shared" = "no"; then
    AC_MSG_ERROR([PDO is not enabled! Add --enable-pdo to your configure line.])
  fi

  AC_MSG_CHECKING([Oracle Install-Dir])
  if test "$PHP_PDO_OCI" = "yes" || test -z "$PHP_PDO_OCI"; then
    PDO_OCI_DIR=$ORACLE_HOME
  else
    PDO_OCI_DIR=$PHP_PDO_OCI
  fi
  AC_MSG_RESULT($PHP_PDO_OCI)

  AC_MSG_CHECKING([if that is sane])
  if test -z "$PDO_OCI_DIR"; then
    AC_MSG_ERROR([You need to tell me where to find your Oracle Instant Client SDK, or set ORACLE_HOME.])
  else
    AC_MSG_RESULT([yes])
  fi

  if test "instantclient" = "`echo $PDO_OCI_DIR | cut -d, -f1`" ; then
    AC_CHECK_SIZEOF([long])
    AC_MSG_CHECKING([if we're at 64-bit platform])
    AS_IF([test "$ac_cv_sizeof_long" -eq 4],[
      AC_MSG_RESULT([no])
      PDO_OCI_CLIENT_DIR="client"
    ],[
      AC_MSG_RESULT([yes])
      PDO_OCI_CLIENT_DIR="client64"
    ])

    PDO_OCI_LIB_DIR="`echo $PDO_OCI_DIR | cut -d, -f2`"
    AC_PDO_OCI_VERSION($PDO_OCI_LIB_DIR)

    AC_MSG_CHECKING([for oci.h])
    dnl Header directory for Instant Client SDK RPM install
    OCISDKRPMINC=`echo "$PDO_OCI_LIB_DIR" | $PHP_PDO_OCI_SED -e 's!^\(.*\)/lib/oracle/\(.*\)/\('${PDO_OCI_CLIENT_DIR}'\)/lib[/]*$!\1/include/oracle/\2/\3!'`

    dnl Header directory for manual installation
    OCISDKMANINC=`echo "$PDO_OCI_LIB_DIR" | $PHP_PDO_OCI_SED -e 's!^\(.*\)/lib[/]*$!\1/include!'`

    dnl Header directory for Instant Client SDK zip file install
    OCISDKZIPINC=$PDO_OCI_LIB_DIR/sdk/include

    if test -f "$OCISDKRPMINC/oci.h" ; then
      PHP_ADD_INCLUDE($OCISDKRPMINC)
      AC_MSG_RESULT($OCISDKRPMINC)
    elif test -f "$OCISDKMANINC/oci.h" ; then
      PHP_ADD_INCLUDE($OCISDKMANINC)
      AC_MSG_RESULT($OCISDKMANINC)
    elif test -f "$OCISDKZIPINC/oci.h" ; then
      PHP_ADD_INCLUDE($OCISDKZIPINC)
      AC_MSG_RESULT($OCISDKZIPINC)
    else
      AC_MSG_ERROR([I'm too dumb to figure out where the include dir is in your Instant Client install])
    fi
  else
    AC_PDO_OCI_CHECK_LIB_DIR($PDO_OCI_DIR)

    if test -d "$PDO_OCI_DIR/rdbms/public"; then
      PHP_ADD_INCLUDE($PDO_OCI_DIR/rdbms/public)
      PDO_OCI_INCLUDES="$PDO_OCI_INCLUDES -I$PDO_OCI_DIR/rdbms/public"
    fi
    if test -d "$PDO_OCI_DIR/rdbms/demo"; then
      PHP_ADD_INCLUDE($PDO_OCI_DIR/rdbms/demo)
      PDO_OCI_INCLUDES="$PDO_OCI_INCLUDES -I$PDO_OCI_DIR/rdbms/demo"
    fi
    if test -d "$PDO_OCI_DIR/network/public"; then
      PHP_ADD_INCLUDE($PDO_OCI_DIR/network/public)
      PDO_OCI_INCLUDES="$PDO_OCI_INCLUDES -I$PDO_OCI_DIR/network/public"
    fi
    if test -d "$PDO_OCI_DIR/plsql/public"; then
      PHP_ADD_INCLUDE($PDO_OCI_DIR/plsql/public)
      PDO_OCI_INCLUDES="$PDO_OCI_INCLUDES -I$PDO_OCI_DIR/plsql/public"
    fi
    if test -d "$PDO_OCI_DIR/include"; then
      PHP_ADD_INCLUDE($PDO_OCI_DIR/include)
      PDO_OCI_INCLUDES="$PDO_OCI_INCLUDES -I$PDO_OCI_DIR/include"
    fi

    if test -f "$PDO_OCI_LIB_DIR/sysliblist"; then
      PHP_EVAL_LIBLINE(`cat $PDO_OCI_LIB_DIR/sysliblist`, PDO_OCI_SYSLIB)
    elif test -f "$PDO_OCI_DIR/rdbms/lib/sysliblist"; then
      PHP_EVAL_LIBLINE(`cat $PDO_OCI_DIR/rdbms/lib/sysliblist`, PDO_OCI_SYSLIB)
    fi
    AC_PDO_OCI_VERSION($PDO_OCI_LIB_DIR)
  fi

  case $PDO_OCI_VERSION in
    7.3|8.0|8.1)
      AC_MSG_ERROR([Oracle client libraries < 9 are not supported])
      ;;
  esac

  PHP_ADD_LIBRARY(clntsh, 1, PDO_OCI_SHARED_LIBADD)
  PHP_ADD_LIBPATH($PDO_OCI_LIB_DIR, PDO_OCI_SHARED_LIBADD)

  PHP_CHECK_LIBRARY(clntsh, OCIEnvCreate,
  [
    AC_DEFINE(HAVE_OCIENVCREATE,1,[ ])
  ], [], [
    -L$PDO_OCI_LIB_DIR $PDO_OCI_SHARED_LIBADD
  ])

  PHP_CHECK_LIBRARY(clntsh, OCIEnvNlsCreate,
  [
    AC_DEFINE(HAVE_OCIENVNLSCREATE,1,[ ])
  ], [], [
    -L$PDO_OCI_LIB_DIR $PDO_OCI_SHARED_LIBADD
  ])

  dnl Scrollable cursors?
  PHP_CHECK_LIBRARY(clntsh, OCIStmtFetch2,
  [
     AC_DEFINE(HAVE_OCISTMTFETCH2,1,[ ])
  ], [], [
    -L$PDO_OCI_LIB_DIR $PDO_OCI_SHARED_LIBADD
  ])

  PHP_CHECK_PDO_INCLUDES

  PHP_NEW_EXTENSION(pdo_oci, pdo_oci.c oci_driver.c oci_statement.c, $ext_shared,,-I$pdo_cv_inc_path)

  PHP_SUBST_OLD(PDO_OCI_SHARED_LIBADD)
  PHP_SUBST_OLD(PDO_OCI_DIR)
  PHP_SUBST_OLD(PDO_OCI_VERSION)

  PHP_ADD_EXTENSION_DEP(pdo_oci, pdo)

  AC_DEFINE_UNQUOTED(PHP_PDO_OCI_CLIENT_VERSION, "$PDO_OCI_VERSION", [ ])
fi

未经允许不得转载:lxfamn » pdo_oci 和oci8

赞 (0) 打赏

置顶推荐

评论 0

觉得文章有用就打赏一下文章作者

支付宝扫一扫打赏

微信扫一扫打赏